UPDATE:
As of DiskWriter v1.05 alongside template1225.txt, All the methods on this thread are no longer necessary.
All you need to bypass the 10 game limit now is a copy of DiskWriter v1.05, template1225.txt and multiple micro SD cards.
Use the thing (because I love A:LoK) from method 3 to be able to play your games on the second/third/fourth/fifth etc SD card. Remember, your first burned SD card is "GOLDEN" with no scroll bug. NEVER transfer games from this SD card to another.
If your game is not in the latest template.txt, just make your own!:
http://filetrip.net/dl?vBHqt3NOoQ
~~~~~~~~~~~~~~~~~~~~~~~
This is a compilation of all the methods that will allow you to bypass the 10 game limit on red button Sky3DS cartridges.
Method 1
saves game data within the game itself so you must backup the entire game to be able to backup your save.
Method 2
has a very high chance of corrupting your data so this method is heavily NOT recommended. It's only here because since it's still a bypass method, it's still relevant.
Method 3
is by far the most reliable one and was found by our own gbatemp user warnings.
and as always,
PROCEED WITH CAUTION
Changelog
As of DiskWriter v1.05 alongside template1225.txt, All the methods on this thread are no longer necessary.
All you need to bypass the 10 game limit now is a copy of DiskWriter v1.05, template1225.txt and multiple micro SD cards.
Use the thing (because I love A:LoK) from method 3 to be able to play your games on the second/third/fourth/fifth etc SD card. Remember, your first burned SD card is "GOLDEN" with no scroll bug. NEVER transfer games from this SD card to another.
When booting up your 3DS, press and hold the red button for 5seconds until it stops scrolling. then press A to play your game.
If your game is not in the latest template.txt, just make your own!:
http://filetrip.net/dl?vBHqt3NOoQ
~~~~~~~~~~~~~~~~~~~~~~~
This is a compilation of all the methods that will allow you to bypass the 10 game limit on red button Sky3DS cartridges.
Method 1
saves game data within the game itself so you must backup the entire game to be able to backup your save.
Method 2
has a very high chance of corrupting your data so this method is heavily NOT recommended. It's only here because since it's still a bypass method, it's still relevant.
Method 3
is by far the most reliable one and was found by our own gbatemp user warnings.
The tool we'll be using to achieve this is [Sky3DScTool.exe]
Download here: http://filetrip.net/dl?gdD1oNxodp
1. Make a copy of your back up because we will be modifying it (crucial to get it to work).
2. Open the downloaded Skye3DScTool.exe
3. After running it should look like this
4. Click […] button or [File] [Load File]
5. Select the backup that will be converted
6. select [Open]
Copy down what's written in the CODE section. (We will need this to modify template.txt later).
7. click [conversion]
8. Click [OK], and then in template.txt, use CTRL-F and key in the game code from earlier and modify it's corresponding data.
For games less than 4GB in size, you need to change the second row of data in the sixth and eighth position to “F8” and “98” respectively.
For games 4GB and above, you need to change the second row of data in the sixth and eighth position to “F0” and “98”
There also may be more than one instance so just modify them all.
For example my game code was CTR-P-EGDP So I CTRL-F looked it up and changed it
As shown, mine were "FA" and "98". It’s different depending on the game code.
Change these to "F8" and "98" respectively.
Should result in this (without the blue highlight OFCOURSE!)
Save and exit.
9. Now just run DiskWriter.exe and burn it as usual. If done correctly it should display EEPROM status as "NO'
10. After burning is complete, insert the tf card into Sky3ds and run it on the 3ds.
How to play more than 10 backups
You know how everytime you press the red button it cycles over to the next backup in the sd card? yeah well now what you need to do is
Thanks to ONERICE, 3DMFLiNG, ZnyRocK!
Released by them, posted on http://blog.3dseu.com/sky3ds-10-limit-games-cracked-tool-which-saves-perfectly/
For the lazies and advanced users, temper dawnbomb has manually created a template.txt file that has been edited with method 1 based off Sky3DS' template.txt 12/08/2014 which means that all you have to do is run the ROM through the crack tool and just use his template when writing with DiskWriter.
His template can be found here. Just know that games bigger than 2.1gb might not work. Check issues/compatibility for more information. This is also very outdated now.
Download here: http://filetrip.net/dl?gdD1oNxodp
1. Make a copy of your back up because we will be modifying it (crucial to get it to work).
2. Open the downloaded Skye3DScTool.exe
3. After running it should look like this
4. Click […] button or [File] [Load File]
5. Select the backup that will be converted
6. select [Open]
Copy down what's written in the CODE section. (We will need this to modify template.txt later).
7. click [conversion]
8. Click [OK], and then in template.txt, use CTRL-F and key in the game code from earlier and modify it's corresponding data.
For games less than 4GB in size, you need to change the second row of data in the sixth and eighth position to “F8” and “98” respectively.
For games 4GB and above, you need to change the second row of data in the sixth and eighth position to “F0” and “98”
There also may be more than one instance so just modify them all.
For example my game code was CTR-P-EGDP So I CTRL-F looked it up and changed it
As shown, mine were "FA" and "98". It’s different depending on the game code.
Change these to "F8" and "98" respectively.
Should result in this (without the blue highlight OFCOURSE!)
Save and exit.
9. Now just run DiskWriter.exe and burn it as usual. If done correctly it should display EEPROM status as "NO'
10. After burning is complete, insert the tf card into Sky3ds and run it on the 3ds.
How to play more than 10 backups
You know how everytime you press the red button it cycles over to the next backup in the sd card? yeah well now what you need to do is
- Press and hold the red switch for about 5 seconds. You'll notice that the game doesn't automatically change. Now press the A button again to run the next game.
After you exit out the game with the home button. Go into setting then press x to get out. You can go to another game or turn the system off.
Thanks to ONERICE, 3DMFLiNG, ZnyRocK!
Released by them, posted on http://blog.3dseu.com/sky3ds-10-limit-games-cracked-tool-which-saves-perfectly/
For those who don’t know,
The only reason why the red button Sky3DS is limited to 10 games is because for games that send data to EEPROM (literally 99% games) the red button cartridge fails in being able to move the data from EEPROM to microSD which means more space is taken up on the actual EEPROM of the cartridge itself instead of being moved to the abundant pits of the microSD.
Basically this tool changes that code within games from saving to EEPROM to not saving to EEPROM. This is what allows you to run more than 10 games because less EEPROM space it taken up on the actual cart itself.
- EEPROM stands for Electrically Erasable Programmable Read-Only Memory and is a type of non-volatile memory used in computers and other electronic devices to store small amounts of data that must be saved when power is removed, e.g., calibration tables or device configuration.
The only reason why the red button Sky3DS is limited to 10 games is because for games that send data to EEPROM (literally 99% games) the red button cartridge fails in being able to move the data from EEPROM to microSD which means more space is taken up on the actual EEPROM of the cartridge itself instead of being moved to the abundant pits of the microSD.
Basically this tool changes that code within games from saving to EEPROM to not saving to EEPROM. This is what allows you to run more than 10 games because less EEPROM space it taken up on the actual cart itself.
- Some games past the limit might auto-cycle past itself (skips over). One fix is as follows
To play the games that auto cycle past themself, press and hold the red button for about 5 seconds. press a twice to run the next game. (when you hold the red button, it won't load the next game till you release, and pressing A will run it for you when it loads instead of cycling past itself
- Animal crossing: New Leaf requires DiskWriter and template.txt 11/06/2014 because it's special. that can be found bundled together here
1) Delete any existing old ACNL from your sky3ds card using the latest writer (Sky3DS DiskWriter V1.04 [12/09/2014]) from sky3ds website.
2) Switch to the old writer (Sky3DS DiskWriter [11/06/2014]) with the old template included and write the ACNL game (Game to be burned should not be trimmed or backup by diskwriter) to the sky3ds card. The game do not need to be hack by sky3dsctool from sky3ds website. It seem that the old template already set to put the game in "Eeprom=No" after write complete using old writer.
3) Once ACNL writing is completed. Insert the sky3ds card in your console and power on.
4) When you switching to the 11 game. Look at the screen of your 3ds to see your game starting to switch. Wait until the ACNL game appear. Once appear, without any delay hold on to the red button for 5 second and then release. The blinking light will flashes non stop but your ACNL game will remain without automatically switching to the next game. Now click "A" button to launch the ACNL game without any issue. Remember when you end the game, make sure you save and press home and close the app. The blinking light will still flash non stop which prevent you from skipping to the next game. One method I try is to enter setting and from setting exit out back to home screen by pressing "X" button and it will switch to the next game. The game work for me and save still remain.
5) Remember only use the old writer and template for this ACNL train loading fix.
- Tetris doesn't skip good. If you wanna play Tetris please make it part of the original 10 and not the 10+.
- Games bigger than 2GB except Super Smash Bros 3DS WILL have issues if it's not part of the original 10. These range of save issues and glitches ingame.
- If you have the game-card cannot be read, Use method 3.
His template can be found here. Just know that games bigger than 2.1gb might not work. Check issues/compatibility for more information. This is also very outdated now.
Sequentially burning the games onto your SD card using Diskwriter
This method requires that you already have 10 backups burned onto your Sky3DS. It's not recommended to use this method because it has a very high chance of corrupting your data. You have been warned
Lets say you have burned Pokemon Y, Mario Kart 7, Pokemon Omega Ruby, Smash bros and etc. (too lazy to type up 10 games)
Now, respectively, Pokemon Y will be capital A, Mario Kart 7 will be capital B, Omega Ruby will be capital C, Smash bros capital D and so on until the 10th game which will be capital J.
To burn new games onto your Sky3DS, you will need either your existing sd card or a new one. I recommend a new one just incase things go awry.
Now, The new backups will be considered small a, b, c, d and so on until j.
Say you wanna burn that Layton game. We'll consider this as small a.
So now, all you need to do is first burn Pokemon Y (capital A), then burn that Layton game (small a) then burn Mario Kart 7 (capital B) and so on. If you don't have any additional backups you want to add just continue burning in the capital order (What's after Mario Kart 7 which is capital B? Omega Ruby! which is capital C).
Get where I'm going with this? now, theoretically, I assume that this only raises the limit to 20 games since it's only till small J. But sadly I have no way to prove this.
]So once you've burned your backups, Turn off your console, insert your Sky3DS and when game A is shown (in this case Pokemon Y),
Basically, to play the small letter backups, you need to repeat step 1 to 3 everytime. As mentioned, I'm not sure how this is affected if you want to jump to the next capital letter instead of a small letter. USE CAUTION.
This method requires that you already have 10 backups burned onto your Sky3DS. It's not recommended to use this method because it has a very high chance of corrupting your data. You have been warned
Lets say you have burned Pokemon Y, Mario Kart 7, Pokemon Omega Ruby, Smash bros and etc. (too lazy to type up 10 games)
Now, respectively, Pokemon Y will be capital A, Mario Kart 7 will be capital B, Omega Ruby will be capital C, Smash bros capital D and so on until the 10th game which will be capital J.
To burn new games onto your Sky3DS, you will need either your existing sd card or a new one. I recommend a new one just incase things go awry.
Now, The new backups will be considered small a, b, c, d and so on until j.
Say you wanna burn that Layton game. We'll consider this as small a.
So now, all you need to do is first burn Pokemon Y (capital A), then burn that Layton game (small a) then burn Mario Kart 7 (capital B) and so on. If you don't have any additional backups you want to add just continue burning in the capital order (What's after Mario Kart 7 which is capital B? Omega Ruby! which is capital C).
Get where I'm going with this? now, theoretically, I assume that this only raises the limit to 20 games since it's only till small J. But sadly I have no way to prove this.
]So once you've burned your backups, Turn off your console, insert your Sky3DS and when game A is shown (in this case Pokemon Y),
- Press the red button on the Sky3DS
- Once it starts flashing blue, eject the Sky3DS
- Re-insert the Sky3DS and quickly press A and game small a should be loaded (in this case that Layton game)
- If you want to play game capital B, just press the red button like normal
Basically, to play the small letter backups, you need to repeat step 1 to 3 everytime. As mentioned, I'm not sure how this is affected if you want to jump to the next capital letter instead of a small letter. USE CAUTION.
This method requires the implementation of multiple micro SD cards. Meaning you'll have 1 SD card with 10 games, and another with however many you desire.
Roms on the first SD card will work like usual whilst roms on the next SD card and upwards will have an "auto-scrolling" bug which will literally cycle through your roms until you do the thing.
Make sure you have a fresh SECOND micro SD card because this tutorial will be focusing on getting more than 10 games on that specifically.
REMINDER: The FIRST SD card will be your "golden" SD card with no auto-scroll bug so don't lose it.
With your second SD card in hand,
1. Create a folder on your desktop and name it anything you want. (For this tutorial we'll name it "test")
2. Download a fresh copy of DiskWriter 1.04 and template 12/19 and place it in the test folder. it HAS to be a new fresh copy. Don't use the one you used before for the first SD card.
3. Create a folder within the test folder and call it "games".
4. Take out a calculator and calculate how many roms will safely fit on your SD card depending on it's size. You won't be able to add more games so you should go ahead and get a 32GB SD card and fill it up to it's max. Otherwise, just use a 16GB card for now. Later when you want more games, you'll need to repeat from step 1 with a third SD card.
5. Once all the roms are added into this folder, make a note on the alphabetical order of the roms. For example if I have Mario Kart 7, Pokemon Alpha Saphire, Kingdom Hearts 3D, I'd need to note the arrangement in alphabetical order. (1. Kingdom Hearts 3D, 2. Mario Kart 7, 3. Pokemon Alpha Sapphire).
6. Create a new .txt file within "test". (Right click blank space, new text document) and name it template.txt. Not "games". You should have roms within "games", and as of now, template.txt, template1219.txt and DiskWriterv1.04 within "test".
7. In the order that your roms are listed within the games folder, open template1219.txt and copy the CTR-P-XXXX section for each game and paste it into template.txt you created earlier in alphabetical order. If you have 3 roms within the games folder, you should only have 3 entries. For roms with multiple entries, copy and add them all whilst remaining in alphabetical order.
8. Delete template1219.txt
9. Format the SD card with windows.
10. Format the SD card with DiskWriter from the "test" folder with administrator privileges. (Right click, Run as Administrator).
11. If all goes accordingly you should have a file called "setup.rar" within your SD card. Open this and extract the template.txt inside and make sure it's the one you just modified.
12. Now write the games to this SD card in the order that they are listed in the games folder from step 5.
13. Profit!
So about the thing you have to do to get the "auto-scroll" bug under control, When booting up your 3DS, press and hold the red button for 5seconds until it stops scrolling. then press A to play your game.
TIPS
-Stick to 10 Roms per microSD for easy AUTO-SCROLL.
-DO NOT Import games from the first SD card to other SD cards because this will mess up the scrolling bug.
-If you're paranoid, to be safe, backup .sav files prior to microSD switching via diskwriter.
This method only works with DiskWriter v1.04.
Roms on the first SD card will work like usual whilst roms on the next SD card and upwards will have an "auto-scrolling" bug which will literally cycle through your roms until you do the thing.
Make sure you have a fresh SECOND micro SD card because this tutorial will be focusing on getting more than 10 games on that specifically.
REMINDER: The FIRST SD card will be your "golden" SD card with no auto-scroll bug so don't lose it.
With your second SD card in hand,
1. Create a folder on your desktop and name it anything you want. (For this tutorial we'll name it "test")
2. Download a fresh copy of DiskWriter 1.04 and template 12/19 and place it in the test folder. it HAS to be a new fresh copy. Don't use the one you used before for the first SD card.
3. Create a folder within the test folder and call it "games".
4. Take out a calculator and calculate how many roms will safely fit on your SD card depending on it's size. You won't be able to add more games so you should go ahead and get a 32GB SD card and fill it up to it's max. Otherwise, just use a 16GB card for now. Later when you want more games, you'll need to repeat from step 1 with a third SD card.
5. Once all the roms are added into this folder, make a note on the alphabetical order of the roms. For example if I have Mario Kart 7, Pokemon Alpha Saphire, Kingdom Hearts 3D, I'd need to note the arrangement in alphabetical order. (1. Kingdom Hearts 3D, 2. Mario Kart 7, 3. Pokemon Alpha Sapphire).
6. Create a new .txt file within "test". (Right click blank space, new text document) and name it template.txt. Not "games". You should have roms within "games", and as of now, template.txt, template1219.txt and DiskWriterv1.04 within "test".
7. In the order that your roms are listed within the games folder, open template1219.txt and copy the CTR-P-XXXX section for each game and paste it into template.txt you created earlier in alphabetical order. If you have 3 roms within the games folder, you should only have 3 entries. For roms with multiple entries, copy and add them all whilst remaining in alphabetical order.
8. Delete template1219.txt
9. Format the SD card with windows.
10. Format the SD card with DiskWriter from the "test" folder with administrator privileges. (Right click, Run as Administrator).
11. If all goes accordingly you should have a file called "setup.rar" within your SD card. Open this and extract the template.txt inside and make sure it's the one you just modified.
12. Now write the games to this SD card in the order that they are listed in the games folder from step 5.
13. Profit!
So about the thing you have to do to get the "auto-scroll" bug under control, When booting up your 3DS, press and hold the red button for 5seconds until it stops scrolling. then press A to play your game.
TIPS
-Stick to 10 Roms per microSD for easy AUTO-SCROLL.
-DO NOT Import games from the first SD card to other SD cards because this will mess up the scrolling bug.
-If you're paranoid, to be safe, backup .sav files prior to microSD switching via diskwriter.
This method only works with DiskWriter v1.04.
and as always,
PROCEED WITH CAUTION
Changelog
1/16/2015 - Added Sky3DS template builder provided by warnings
12/28/2014 - Added warnings method which is no longer used with the latest diskwriter 1.05 but added anyways for those having 1.05 issues. Pics will come soon.
12/15/2014 – Added info for games more than 4GB, added info for how it works section, added issues/compatibility list, Added what you need to know, clean up.
12/12/2014 - Changed Method 1 : updated pictures with the english version of the tool.
(Video tutorial + how to do the swapping coming as soon as my Sky3DS arrives)
12/11/2014 - First compilation and retranslation of methods sourced from other threads.