According to this post, http://www.cngba.com/thread-16063196-1-2.html , some people got the MML to go into sleep mode by covering pin 1 and 7 using tin foil, anyone know if it will also work if I darken it with maker?
if you're talking about this:
it looks like they used foil to jumper pin 1 to pin 7
No, just 1 and 7, tried it, works great, I am just scared that the foil will come off so I want to know if I can cover the pins with something else.
anyone have a better way to do this? i just got this but i dont want the foil to come off and mess up my ds lite?
Conductive paint from a automotive shop will do the trick. Also used a lot to overclock AMD CPU's.
I'm curious about this too. Can you take a 30awg wire and solder the two points together and tuck the wire in the "lip" above the pins? My MML should be arriving any day now so I can't test it yet.
- Joined
- May 28, 2006
- Messages
- 969
- Trophies
- 1
- Location
- Gosford, Australia
- Website
- Visit site
- XP
- 389
- Country
Yeah that's what I thought.Conductive paint from a automotive shop will do the trick. Also used a lot to overclock AMD CPU's.
You can buy pen style things with it in for lotsa dollars at electronics stores or just get rear window demister repair kits from auto stores.
Probably would want to tape over the conductive trace on the back of the cart though. So it doesn't scrape off.
cant you just crack it open and sodder it?Â
I don't think the MML will open up, if it does it won't be easy to do.
Just wondering if anyone else on here has tried this?
Thinking about doing it myself, need a few things cleared up tho:
1) How do you get the strips of foil on each pin to actually stick?
2) Are the 2 strips connected to the big square bit (so the pins are joined)? Or is it just covering 2 pins? - I guess joined but just making sure
3) How does it work?!
Cheers
Thinking about doing it myself, need a few things cleared up tho:
1) How do you get the strips of foil on each pin to actually stick?
2) Are the 2 strips connected to the big square bit (so the pins are joined)? Or is it just covering 2 pins? - I guess joined but just making sure
3) How does it work?!
Cheers
1) Basically I just cut them really small and then lined them up. Then I used the side of a finger nail file and kinda wedged the foil into the pin "slot." took me a bit but it finally worked. The trick is you have to make sure the foil covers the whole pin. I was just covering half of the pin at first and it wouldn't work.Just wondering if anyone else on here has tried this?
Thinking about doing it myself, need a few things cleared up tho:
1) How do you get the strips of foil on each pin to actually stick?
2) Are the 2 strips connected to the big square bit (so the pins are joined)? Or is it just covering 2 pins? - I guess joined but just making sure
3) How does it work?!
Cheers
2) Yes, they are connected to the square of aluminum foil so the two pins actually connect.
3) No idea. Something about simulating a NDS game wrong but pins 1 and 7 do it ? Not really sure
Similar threads
-
Psionic Roshambo
-
K3Nv2
-
BigOnYa
-
Xdqwerty
what are you looking at? -
AncientBoi
- O OhHiNick
-
BakerMan
I rather enjoy a life of taking it easy. I haven't reached that life yet though.
-
@
BakerMan:
for anyone wondering what that is, basically, it's about the one person in the world without magic, instead he's just dummy strong
-
@
BigOnYa:
Dr. What and Dr. Where got lost together somewhere in time, Dr. When is looking for them+1
-
-
-
-
-
-
-
-
-
-
-
@
BigOnYa:
My wifey gets mad and tells me its a bad habit to bite your nails, even though I told her I washed my feet first.
-
-
-
-
@
BigOnYa:
Nuh it was a joke, but I used to bite my nails when I was young, but when I started doing construction work and seen what crap was under my nails, I stopped.
-
-
@
BigOnYa:
Sometimes yea when they get real long, you want to, but I always end up with a bloody finger or hangnails.
-
-
-
-
-
-