Hacking SWITCH NOOB PARADISE - Ask questions here

[Tunaa]

It's as if they are two completely separate switches. They are not able to "see" each other and interact directly.
If you're hell-bent on this path you can dump them from your Sysnand (would have to run CFW though) using NXdumptool, and then install the resulting dumps in your Emunand. Much easier to find a "backup" and install it directly to Emunand with less risk of polluting your Sysnand and getting banned.

Thanks for the clarification.

 

[Minattz]

importing saves? Can anyone help me with this? Ive searched a bit for it and cant find how to easily do it? i use DBI to import games....not sure on the saves. THanks.

 

[binkinator]

importing saves? Can anyone help me with this? Ive searched a bit for it and cant find how to easily do it? i use DBI to import games....not sure on the saves. THanks.

Use JKSV. Run the game once so you have the save spaces allocated and then import them.

good thread on the topic here: https://gbatemp.net/threads/importing-save-question.607624/

Game Saves​

• jksv — game save manager
• checkpoint — another game save manager
• neumann — yet another game save manager

 

[Minattz]

Sorry, I have JKSV now, I have the save files on my pc....not sure where to put them to import them into the games on my switch....any help?

 

[sudeki300]

you need to put them in the JKSV folder on your switch sd card, are the saves in the correct folders with title ID?

 

[Draxzelex]

Hello!

It's been a long time since I last updated my CFW for Nintendo Switch, and I have some questions. I'd be very grateful if someone could help me.

1. I'm using Neutos instead of Atmosphere, as I understood Tinfoil wasn't compatible with Atmosphere. Is this correct nowadays?

2. I cannot find a new version of Neutos. Has it been discontinued?

3. If I have to go back to Atmosphere, can I update my Neutos files with the new version of Atmosphere (replace files), or should I remove Neutos first, and then install the new version of Atmosphere?

Thanks in advance for your kind help and best regards.

1. It wasn't an issue of compatibility with Atmosphere. It wasn't compatible with Hekate
2. Yes, Neutos has been discontinued
3. I recommend removing Neutos first then downloading the new version of Atmosphere

 

[Asia81]

I dumped the 15.0 keys on my 15.0 sysnand using lockpin rcm, but I can't install the 15.0 firmware on Ryujnx, it tell me I have outdated keys, despite I just dumped them, any ideas?

 

[binkinator]

I dumped the 15.0 keys on my 15.0 sysnand using lockpin rcm, but I can't install the 15.0 firmware on Ryujnx, it tell me I have outdated keys, despite I just dumped them, any ideas?View attachment 332039

Things are still a little shaky at the moment with tools being updated and tests being done with the new pre-release version of Atmosphere. There are no games out that require the new FirmWare. Any particular reason you need this update? If not, it’s better to stay with stable version until all tools have been updated and lessons have been learned.

 

[sudeki300]

I dumped the 15.0 keys on my 15.0 sysnand using lockpin rcm, but I can't install the 15.0 firmware on Ryujnx, it tell me I have outdated keys, despite I just dumped them, any ideas?View attachment 332039

there is no reason for updating the firmware yet as nothing out there needs it to run

 

[Asia81]

I love when people answer a question with an off-topic answer.
I'm sorry but I didn't ask if there was a reason to update.
It's like the guys saying to install luma when peoples asked gateway related stuffs.
Bruh

 

[Dust2dust]

I love when people answer a question with an off-topic answer.
I'm sorry but I didn't ask if there was a reason to update.
It's like the guys saying to install luma when peoples asked gateway related stuffs.
Bruh

This kind of attitude is uncalled for. You're posting in the Switch Noob thread, therefore you probably consider yourself a noob. You were kindly answered that no games need any new keys, and yet you show disrespect to the people who gave you their honest and best opinion on the matter. Don't be too surprised if you get on these guys' ignore list.

 

[urherenow]

This kind of attitude is uncalled for. You're posting in the Switch Noob thread, therefore you probably consider yourself a noob. You were kindly answered that no games need any new keys, and yet you show disrespect to the people who gave you their honest and best opinion on the matter. Don't be too surprised if you get on these guys' ignore list.

yet you are here posting in the newb thread. Does that make you a newb too? This person is a level 10, and like it or not, had a valid point. Asking a person who has ALREADY UPDATED why they updated, and telling them to stay on a lower firmware is not helpful one bit.

 

[Dust2dust]

yet you are here posting in the newb thread. Does that make you a newb too? This person is a level 10, and like it or not, had a valid point.

I didn't ask any question. He did. See the difference?

 

[urherenow]

I didn't ask any question. He did. See the difference?

this is the newb thread. I hate to see 100s of threads people start because they updated too fast, but THIS is where I would expect to see such questions. If you aren't asking or answering, then you're just being a jerk.

 

[dimag0g]

Hi everybody,

I have an eMMC backup from a broken switch that wasn't banned, and another banned switch that is wroking. Is there a way to combine the data from two backups to get a not banned working system?

 

[Redverd]

Help

I can open XB3 with update 1.2.0 & DLC wave 2 but can't play it
when I chose the option to continue the error code 2162-0101 is displayed asking me to restart and update the downloadable content.
My switch is on FW 14.1.2 & AMS 1.3.2
I have tried;

1. Uninstall the update & DLC via DBI installer and reinstall the files downloaded from another site
2. Going into maintenance mode and restarting the device
3. Install only update 1.2.0 at first and this allows me to play the game, but if I installed the DLC after that the game shows the same error code

please help

 

[binkinator]

I love when people answer a question with an off-topic answer.
I'm sorry but I didn't ask if there was a reason to update.
It's like the guys saying to install luma when peoples asked gateway related stuffs.
Bruh

hmmmm. I asked an open ended question of why you needed to update so I could better understand your situation. Didn’t intend to offend. I gave you additional info about the current state of what we’re seeing right now with folks updating. Again, didn’t mean to offend. There are issues that smarter people than me are still researching.

e: Not telling you to install anything else off topic. I am currently testing the same release you are and running into similar issues. The implied solution is to wait and give the Devs some time to iron out some wrinkles.

Hi everybody,

I have an eMMC backup from a broken switch that wasn't banned, and another banned switch that is wroking. Is there a way to combine the data from two backups to get a not banned working system?

An emmc backup from another switch will not bypass a ban. Bans are permanent for that hardware. It’s not really that big a deal other than Online games. If you MUST play Online, you will need a new Switch.

Help

I can open XB3 with update 1.2.0 & DLC wave 2 but can't play it
when I chose the option to continue the error code 2162-0101 is displayed asking me to restart and update the downloadable content.
My switch is on FW 14.1.2 & AMS 1.3.2
I have tried;

1. Uninstall the update & DLC via DBI installer and reinstall the files downloaded from another site
2. Going into maintenance mode and restarting the device
3. Install only update 1.2.0 at first and this allows me to play the game, but if I installed the DLC after that the game shows the same error code

please help

You didn’t mention Sigpatches.

Are yours updated like this: Sigpatches (GBATemp)

e: that error (2162-0101) indicates that you need an additional update. Are you sure you have latest?

e2: holy shit…15GB. Installing XB3 to test along with you.

 

[Redverd]

e: that error (2162-0101) indicates that you need an additional update. Are you sure you have latest?

I have the latest update that I know of.
version 1.2.0 which was released a few days ago alongside DLC wave 2 and from what I can tell, I'm not alone facing this problem.

 

[binkinator]

I have the latest update that I know of.
version 1.2.0 which was released a few days ago alongside DLC wave 2 and from what I can tell, I'm not alone facing this problem.

Got the base XB3 installed along with wave 2 DLC. Haven’t installed any updates yet. Game is loading w/o issue (just bypassed nag with Start Software). Killed the first group of enemies…no issues so far. Do I have to play to a certain point for DLC to become an issue?

e: going to install the update to see if that triggers the issue.

e2: OK, that triggered the issue. Seems that if you do NOT install the latest update and just use Wave 2 DLC the game plays fine. Confirmed the issue…the update is funked up.. Hopefully a new update will be coming out to fix this?

 

[steverebo]

Just upgraded to a 1tb sd card followed the guide online booted into emunand and I get the error "unable to access mi ro sd card"

Any ideas how to fix this all the files are there??