Hacking Setting up Yamt lite for a Ps Vita 1000?

[Quarra]

Hi, i recently got an Sd2Vita and now i am trying to set it up. I was told yamt lite was the best option, and, with a mishaptrying to set it up(that i recovered from. Turns out i was usint the wrong version.),i think i need help. Can anyone help me get it figured out? What steps do i need to take? The exact process. I already undid the mistake i made. Turns out i was using yamt basic and it removed my ux(which I didn’t want)

 

[Shadow#1]

Hi, i recently got an Sd2Vita and now i am trying to set it up. I was told yamt lite was the best option, and, with a mishaptrying to set it up(that i recovered from. Turns out i was usint the wrong version.),i think i need help. Can anyone help me get it figured out? What steps do i need to take? The exact process. I already undid the mistake i made. Turns out i was using yamt basic and it removed my ux(which I didn’t want)

Why make a new thread for the same problem?

 

[Shadow#1]

And here is the guide again

 

[Quarra]

Why make a new thread for the same problem?

Cuz, i was hoping this way it would draw more people who were knowledgeable in yamt for 1k... seemed logical

 

[ZeroSene]

Just use IMCunlocker on your PSV1000 and forget about the mem card problem. You can use YAMT or anything without small problem like this.

 

[Shadow#1]

Just use IMCunlocker on your PSV1000 and forget about the mem card problem. You can use YAMT or anything without small problem like this.

I was not a big problem until he was an idiot and rebooted in the middle of setting it up

 

[Quarra]

I was not a big problem until he was an idiot and rebooted in the middle of setting it up

There was no set up process. I got the app. All it did when i ran it was edit the boot config then close out. Undo it if i ran it again .There was no menu like you put in your instructions

 

[godreborn]

I think I see why I have no storage devices listed. I thought it was henkaku settings, but lite doesn't have that option. it's automatically ux0 for micro sd and uma for memory card afaik, so if you installed yamt lite, you won't have those options. that's what I linked you to. I didn't install full yamt, because it's unnecessary.

 

[Quarra]

Looking closely at the thread again, i used the aurora link you sent. But, Shadow posted Skebla. Perhals if i had used skebla I wouldn’t have had the issue in the first place... idk

 

[godreborn]

dunno. you don't really need the full version if all you want is ux0 and uma. that's the difference between lite and full.

 

[kineticUk]

I recently set up YAMT (first time) for my brother whose vita had developed issues. I first removed hacks, formatted the vita to factory, reinstalled enso etc:

Download latest release https://github.com/SKGleba/yamt-vita
Install app
Run app
Choose install yamt lite
(iirc vita reboots at this point and I thought the install process was complete but one final thing to do)
Go to vita settings and find the new YAMT section.
Change memory card/sd2vita from ‘auto’ to the desired mount points.
Reboot.

Note: It wasn’t working before I manually set the mount points from ‘auto’ to ‘ux0’ or ‘uma0’ in Vita Settings.

 

[godreborn]

I didn't have to do that with yamt lite. it worked from the get go with @Aurora Wright 's version. it doesn't add anything to system settings as the lite version I don't think is supposed to since it only uses two mounting points. it would be pointless to do so and just add an unnecessary step mounting them.

 

[kineticUk]

I thought it was strange that I had to manually set the mount points and ‘auto’ didn’t work but that was the solution and this was a simple setup from factory (hacked, enso, YAMT).

 

[godreborn]

the only problem is he'll face the same issue as last time: nothing appearing, because the app.db will rebuild itself at bootup without those mount points. I think the fact that it rebuilt the database last time, and it took a while means that yamt lite was working. I don't know why he disabled it.

--------------------- MERGED ---------------------------

unfortunately with a 1K system he can't do this, but I have vita shell saves on to my internal memory card just in case something goes wrong.

 

[Quarra]

the only problem is he'll face the same issue as last time: nothing appearing, because the app.db will rebuild itself at bootup without those mount points. I think the fact that it rebuilt the database last time, and it took a while means that yamt lite was working. I don't know why he disabled it.

--------------------- MERGED ---------------------------

unfortunately with a 1K system he can't do this, but I have vita shell saves on to my internal memory card just in case something goes wrong.

like i said before, after a bit of looking i found that everything went wrong the moment i used that link. for one, it didn't give me yamt lite. 2, i had ran it anyway expecting a menu. now after a bit of research it seems that shadow's might be the correct version i need. i think yours was just for 2k but we will see

 

[godreborn]

dunno, I make it appoint not to install skgleba or pine and silica stuff since they've made brickers in the past. that's why I went with Aurora Wright's.

 

[Quarra]

And here is the guide again

hit install lite version and now it's stuck on enso after boot. do i wait or rebuild?

 

[godreborn]

if it's stuck on the enso logo, the sd2vita might not be in all the way. that's what it will do.

 

[Quarra]

if it's stuck on the enso logo, the sd2vita might not be in all the way. that's what it will do.

thanks. now i'm gonna finish step 7

 

[Quarra]

one question: if i ever do decide to stop using sd2(for some reason), what do i do?