Hello all, I just finished installing my SX Lite, the Switch Lite has 10.1.0 with exfat driver already installed beforehand. I got the blue light green light and the SX OS screen. Prompted to update firmware so I did. After rebooting, the bootloader showed up and immediately went to options to backup the sysnand. All was good until it stopped halfway and froze. The only thing I could do was to hard power off. I powered it on again but this time it is stuck at the SX OS logo. The microsd card used is a 512gb sandisk A1 formatted to exfat. Tried another 3 exfat and 2 fat32 cards, same result. Turns out the 512gb card is fake, I had my suspicions but I reconfirmed with the owner. It is most likely the reason why the backup process stopped halfway but I am not sure how it has anything to do with the stuck at SX OS logo issue. Could writing data to the fake card cause issue to the card reader? or maybe this is something different entirely and has nothing to do with the card reader. The card reader still can detect when there is no card inserted. Would appreciate any input or ideas to try to fix this. Thank you.