I have a problem, some times when I save in a game made via GBA injector and I save in the game, and I close it, when I open the game it WON'T save, this does not happened me when I play GBA games downloaded via freeshop (the 10 ones that only where available via the 3ds banner), so, it is something that happened thanks to the GBA injector, why? (Sorry for my bad english)
@Rahkeesh You talk about this?: https://digiex.net/threads/new-supe...bc-gba-smd-gamegear-turbigrafx-16-roms.15394/
So in the New Super Ultimate Injector that is fixed?
And what type of save I have to put in the Ultimate GBA injector? I put the one that is choose by default when I select a rom or what?
And every GBA game use the type of save?
My 3DS is a normal blue one, the first model
(Sorry for my horrible english)
So in the New Super Ultimate Injector that is fixed?
And what type of save I have to put in the Ultimate GBA injector? I put the one that is choose by default when I select a rom or what?
And every GBA game use the type of save?
My 3DS is a normal blue one, the first model
(Sorry for my horrible english)
Last edited by Kirbeat,
Well, I played GBA in my 3DS via NSUI and I have the same issue, I think that is my 3DS or my SD card.
If I were to inject Pokemon Ruby/Sapphire/Emerald to my 3DS, would I be able to to do time-based events such as the Lilycove rooftop sale, water berries, or to the Lilycove lotto? It seems that you can only do those if you played on a real cartridge because they had batteries but by 2019 those "batteries had run dry so time-based events no longer occur".
Please use New Super Ultimate Injector instead. The save might corrupt if you use the older injector (right after beating the main game). As far as my very(!) limited testing went: Time based events seem to work (planted two berries at the first location and they started growing after a few hours (3DS turned off).
There is no way to use GBA multiplayer functions with the 3DS. Repeated dumping/reinjecting saves to emulator(s) or retail cartridges would be necessary if you want to use the trading functions.
As for the batteries in the cartridges: Replacing them is not a very hard soldering job.
I have a GBA ROM that neither this nor NSUI can detect the correct save type for. I know for sure what the save type is, but NSUI doesn't let me choose and only uses "Unknown", and the game won't save. On the other hand, while this old injector allows me to choose a save type, it only allows 4 hex digits of title ID, which isn't very nice.
I noticed that in Beta 27 of NSUI, a new feature was added that allows us to manually search in the game database if there's no exact match, which is very good. Allowing us to manually choose save type is similar in nature. This could even be considered a regression, considering that this old Ultimate injector allows that.
I noticed that in Beta 27 of NSUI, a new feature was added that allows us to manually search in the game database if there's no exact match, which is very good. Allowing us to manually choose save type is similar in nature. This could even be considered a regression, considering that this old Ultimate injector allows that.
Tip:
Ignore my original post: "I found that the Pokemon games (main series) only work if SRAM patch is selected in the last step (VC Parameters)."
I found out afterwards that selecting SRAM patch allows the Pokemon games to boot but saving will not work. The tool in this thread is outdated and does not provide the option to configure injected games as Flash 128kb (1Mb), which the Pokemon games require (at least some of them), as explained in this post. Instead of using this tool, use NSUI (New Super Ultimate Injector), which properly identifies the games' save file type. This got rid of all the problems my son was having trying to launch and save his Pokemon FireRed game.
From the info in that post, it seems like, at the time the tool in this thread was created, it was believed that the 3DS's GBA mode did not support that type of save file, which was later disproved. NSUI doesn't seem to have made it out of the beta phase, but it works just fine. Just keep in mind that most of its GUI is in Spanish so you may need to Google translate some of it.
Ignore my original post: "I found that the Pokemon games (main series) only work if SRAM patch is selected in the last step (VC Parameters)."
I found out afterwards that selecting SRAM patch allows the Pokemon games to boot but saving will not work. The tool in this thread is outdated and does not provide the option to configure injected games as Flash 128kb (1Mb), which the Pokemon games require (at least some of them), as explained in this post. Instead of using this tool, use NSUI (New Super Ultimate Injector), which properly identifies the games' save file type. This got rid of all the problems my son was having trying to launch and save his Pokemon FireRed game.
From the info in that post, it seems like, at the time the tool in this thread was created, it was believed that the 3DS's GBA mode did not support that type of save file, which was later disproved. NSUI doesn't seem to have made it out of the beta phase, but it works just fine. Just keep in mind that most of its GUI is in Spanish so you may need to Google translate some of it.
Last edited by themanuel,
What Pokemon games are you trying to inject? You should switch over to NSUI beta 27 for better save compatibility.
You are absolutely right. Thanks for pointing this out, as I had already forgotten I had posted this "tip" which would have ended up misleading others. I will correct my post shortly.
Whoops, it shows how much time I spent with the tool. To its credit, I spend little time on it because it allowed me to do everything easily an efficiently. Spanish is my native language so I did not bother changing it.
Probably you need to put a "boot.firm" in your SD card. That file stabilises a bit the things, but I don't know if that helps.
First, try to run the hacked game via a emulator of GBA, if it don't run, the problem is the hack itself, or it corrupted the rom or something.
Then, try to run a normal GBA game in your 3DS via the injector, if it don't run, the problem is or your 3DS, the SD card or the computer used to run the injector.
But if the rom-hack run right in a emulator and your 3DS run the GBA games, or the problem is a bad-function between the injector and the hack or I don't know.
Last edited by Kirbeat,
Ok I got it to work now. I enabled the real time clock.(which the game uses) issue I am having now though is it says it won't save. When I start the game it says something about a 1m circuit board or something, then when I try saving in game it gives me an error and says I can't save...help? I have supplied a screenshot:
https://gyazo.com/82531759817e54fd7020ea81b6a8b3e5
https://gyazo.com/bb990a5be6960d48f89d759b772844c7
https://gyazo.com/ac56504637a8f3f1a808e9835f130a34
https://gyazo.com/ea03252d1d7e57cc6503d68fe4e4788f
I am pretty sure everything is correct? what could I change?
- Joined
- Nov 28, 2013
- Messages
- 2,921
- Trophies
- 3
- Age
- 21
- Location
- Virtual Earth
- Website
- lillie2523.carrd.co
- XP
- 4,820
- Country
This injector is old and outdated. Please try using the New Super Ultimate Injector instead and let us know if anything improves.
Similar threads
- No one is chatting at the moment.
-
-
@
Quincy:
Usually when such a big title leaks the Temp will be the first to report about it (going off of historical reports here, Pokemon SV being the latest one I can recall seeing pop up here) -
@
K3Nv2:
I still like how a freaking mp3 file hacks webos all that security defeated by text yet again -
@
BigOnYa:
They have simulators for everything nowdays, cray cray. How about a sim that shows you playing the Switch. -
-
@
K3Nv2:
https://www.verizon.com/home/intern...0a82b82a&vendorid=CJM&PID=552179&AID=11365093 can I cancel and keep the switch lol+1
-
@
BigOnYa:
I want a 120hz 4k tv but crazy how more expensive the 120hz over the 60hz are. Or even more crazy is the price of 8k's.
-
-
@
BigOnYa:
Not a big movie buff, more of a gamer tbh. And Series X is 120hz 8k ready, but yea only 120hz 4k games out right now, but thinking of in the future.
-
-
@
BigOnYa:
I only watch tv when i goto bed, it puts me to sleep, and I have a nas drive filled w my fav shows so i can watch them in order, commercial free. I usually watch Married w Children, or South Park
-
-
@
BigOnYa:
I stream from Nas to firestick, one on every tv, and use Kodi. I'm happy w it, plays everything. (I pirate/torrent shows/movies on pc, and put on nas)
-
-
-
-
@
BigOnYa:
oh you mean the 3rd party apps on Kodi, yea i know what you mean, yea there are still a few cool ones, in fact watched the new planet of the apes movie other night w wifey thru one, was good pic surprisingly, not a cam
-
-
-
@
BigOnYa:
I got my Dad a firestick for Xmas and showed him those 3rd party sites on Kodi, he loves it, all he watches anymore. He said he has got 3 letters from AT&T already about pirating, but he says f them, let them shut my internet off (He wants out of his AT&T contract anyways)
-
-
@
BigOnYa:
I just use a VPN, even give him my login and password so can use it also, and he refuses, he's funny.
-
@
BigOnYa:
I had to find and get him an old style flip phone even without text, cause thats what he wanted. No text, no internet, only phone calls. Old, old school.
-
-