Hacking SWITCH NOOB PARADISE - Ask questions here

[Gizmo2k]

when will atmos 0.9.4 9.0.0 get tinfoil/hbgshop 4.0.0 support right now i get corrupted environment install error and thats where i primarily install and download my xcis/nsp

thanks for any insight im new to the switch i have the hard modded tx chip inside my console for boot without dongle but i only have the emu nand 8.1.0 on my primary card, the other wont boot cause im on sys nand 9.0.0 already so im (200gb sxos 8.1.0) (128gb atmos sysnand (banned)9.0.0) and reg sysnand uses 128gb 9.0.0 but im banned on it already for booting sysnand sxos without doing emunand install on a card so i use another switch for online use

i just want tinfoil to work on 9.0.0 until sxos drops the update for 9.0.0

 

[xakiharu]

I have a sysnand (should be clean) and emunand (always airplane mode) running 8.1.0. If I wanted to play with online with my cartridges, should I boot off sysnand (stock) with hekate? Or should I shutdown the switch, pull the SD card and power it on? Or it really doesn't matter.

 

[Christian Rosado]

Now that atmosphere 9.0 (compability) has been released. I want to have a sysnand for online stuff and emu (offline) for cfw. Is this the best guide to follow? Is it updated? thanks :https://nh-server.github.io/switch-guide/

 

[Spinsz]

Wondering if anyone could help me with this. This is on my second switch that is updated to 9.0. I downloaded new versions of atmosphere and goldlead/ tree. Everything seems to work fine except when installing any NSP file. I've updated all the patches also and still get a firmware mismatch error.

 

[Smoker1]

Besides JNoexs, is there another method for finding Pointers????? Or at least a way to convert the Addresses I get from JNoexs tp what they should be on the Switch????

Example of JNoexs Results. Notice the Time Pointer Results vs. the Search Results.

Game in Question - Johnny Turbo's Arcade - Fighter's History

TitleID = 0100B3F00B9F2000

BuildID = 64b19fa91081374f (Base Version)

Health Cheat Requires 2 Addresses. If you find the one for the Health Bar Graphic only, just add 424+ Hex Amount for the Actual Health. You can use the 2nd by itself, but the Health Bar Graphics will fluctuate. I just think it would be preferred to have both. Also, if anyone can create the proper Pointers for these, that would be GREATLY appreciated, because with what I have to work with........I cant get them

 

[bird333]

Can Hekate now boot stock on emunand?

 

[Hayato213]

Can Hekate now boot sysnand on emunand?

No you have to reboot and pick which one to boot into if there was autoboot set up.

 

[bird333]

No you have to reboot and pick which one to boot into if there was autoboot set up.

Sorry I meant stock on an emunand.

 

[Yung_Shyne]

So I re-did everything using both updated Hekate and atmosphere. I followed step buy step. However, when I try to do my first launch, it told me to make sure there is a .ini file in the bootloader file. I have two bootloader folders in the root of my SD card. one is z compressed zip. Should I have extracted that?

 

[Hayato213]

Sorry I meant stock on an emunand.

You can't go from one NAND to another without rebooting, so you still have to reboot into the hekate to boot into stock Sysnand. There is no way to boot directly from Emunand without going through a bootloader.

 

[Yung_Shyne]

You can't go from one NAND to another without rebooting, so you still have to reboot into the hekate to boot into stock Sysnand. There is no way to boot directly from Emunand without going through a bootloader.

Nevermind, I forgot to choose to use the sd 550 thingy. Hold till next derp question. (:
It says current version 9.0.0/AMS 0/94/E
So here comes the fun part. hopefully!

 

[Robmane77]

There is absolutely no reason to update to 9.0 unless you will die by not playing games online. And there is always a risk of getting banned when connecting a hacked console to Nintendo's servers.

I feel u bro but none of my games work unless to 9.0 that’s y I was asking how I can update it safely I was thinking backing up my files n factory reset my switch would that work? Cuz I couldn’t find 9.0 on choidunrynx

 

[giovany86]

Hello, just a quick question, how do i update my emunand (it's offline, no internet connection) ? Currently i'm backing up my sysnand freshly updated to 9.0.0 because i saw that Atmosphere now support 9.0.0

 

[Yung_Shyne]

I thought there would be a store like there is on vita?

 

[tosj87]

Hi all. I have a never ever hacked switch ON 8.1. Now i want emummc what is the best i do? First update to 9.0 then a backup with hekate an after that instal emummc??

 

[A3660537JPN]

Hi all. I have a never ever hacked switch ON 8.1. Now i want emummc what is the best i do? First update to 9.0 then a backup with hekate an after that instal emummc??

No.First backup rawnand,boot0,boot1 with hekate. Enable autorcm. Boot Atmosphere .then,You may update to 9.0.That prevents your Switch from burning fuses unless you disable autorcm or boot stock OS.
After that,you may introduce Emunand.

 

[darthkurak]

Hello, everyone. Noob question here.
I have switch hacked with fuse-glee. Today I did update of Kosmos, and restart console.
New UI of Hekate welcome me, and I have few options to chose when select "Launch".
I read a bit, and it seems, that new way of hacking was introduce with "Emummc" - can anyone point me, what would be the best way to move to new approach?
Should I just create emumcc from current version of CFW on sysnand? Or should I restore nand mmc from backups which I did previously, and then create emummc? Is this neccesery if I doesn't plan go online?
Can someone guide me here?

 

[Yung_Shyne]

I get an error code 2162-0002 (0x4a2) every time I try logging into atmosphere. Am so sad.

 

[A3660537JPN]

I get an error code 2162-0002 (0x4a2) every time I try logging into atmosphere. Am so sad.

Your microsd may have been broken,especially if it is formatted exFAT. Try chkdsk on Windows.

--------------------- MERGED ---------------------------

Hi all. I have a never ever hacked switch ON 8.1. Now i want emummc what is the best i do? First update to 9.0 then a backup with hekate an after that instal emummc??

No.First backup rawnand,boot0,boot1 with hekate. Enable autorcm. Boot Atmosphere .then,You may update to 9.0.That prevents your Switch from burning fuses unless you disable autorcm or boot stock OS.
After that,you may introduce Emunand.

Unless your Switch is unhackable.

 

[MarkPlatinum]

Hello, noob here, have a few questions about emuMMC and partitions. So my setup is the following: Switch bought on March 2017 (Exploitable) and a 64gb microsd card. I created a NAND backup before doing anything and it is stored conveniently in different places, my doubts come when using the emunand. I partitioned my SD card like this:

First partition: 28,33gb (FAT32)
Second partition: 31.13gb (RAW) It says Primary partition in the diskmng, and I don't know if this should be like that.

The thing is, from what I understood reading multiple guides is that when you partition your sd and create an emuMMC it gets copied to that RAW partition, right? (If I am wrong please tell) Well, the thing is that I created my emuMMC, it says that it is enabled in Hetake, and when I launch it with Atmosphere and install some homebrew it writes in the first partition. It doesn't appear in the OFW, but when you enter the settings the free space is gone. Am I doing something wrong? Should I start again?

Also, another thing is that my first partition with my OFW has no games put it says that 14 gb of the sd card are being used, what should I do???