What problem are you having Dougie?Ok dude thx. Gonna try to find what's going wrong or misunderstood by my side and trust me it could last lol
It seems like a bad new Simple_V0.9.8.UF2 bad flash...Like nothing was upgraded...
But i can't be. Don't waste your time with me it's sure i missed something...I mean some Led's understanding/behaviour....
But it flashing so fast...
Last edited by Dougiejones,
Just boot your switch while holding vol- (have a payload called "payload.bin" on SD root)
If you go to hekate menu, it will tell you version you are on. Make sure you have downloaded the 512kb file. It must be 512kb
Yeap pal. But that's not the problem as i mentionned upon this works.
For the file size still verified and it matches.
My problem with V0.9.8 is that the Mode's changing doesn't match the New Flowchart Led's Colour (behaviour)....
While the Payload's change seems to be ok.
Don't take care of my little pb. I'll figure it out. If not i'll post
Last edited by Dougiejones,
OK... What chip are you using dougie?Yeap pal. But that's not the problem as i mentionned upon this works.
For the file size still verified and it matches.
My problem with V0.9.8 is that the Mode's changing doesn't match the New Flowchart Led's Colour (behaviour)....
While the Payload's change seems to be ok.
Don't take care of my little pb. I'll figure it out. If not i'll post
Well i think the better one the Trinket M0 ( others don't be upset not my mind). Yet i succeed to reach Mode 3 AgonNX but i pressed Power and showed onto Memloader
I have so many but the sames lol. Seriously have you got an idea whom singles till 8 i could catch to make some tests ?
--------------------- MERGED ---------------------------
Forgive me for all the dumb questions but i'm a noob to the Switch scene
--------------------- MERGED ---------------------------
What is sure is that Kids won't be ready to play with the Switch for now on as Dady is playing with UF2.
Anyway the Kids aren't alright, aren't they ?
Ok. I'm now in Mode 3 (ArgonNX) despite not led's blinking colors matched. I choose Power Off. After i power on while Vol- pressed and still Argon menu showing upp. No Hekate....
" Probably you have payload.bin as memloader "
No sir. Not named as so. For tests i only have payloads numbered : payload1, payload2,and so on...
" Probably you have payload.bin as memloader "
No sir. Not named as so. For tests i only have payloads numbered : payload1, payload2,and so on...
Last edited by Dougiejones,
OK... You are using a trinket.
Sure you are using TRINKET/REBUG?
Are you seeing a blue LED when you press vol+? You should see blue, then white blink, then red, white blink, then green, white blink, finally white and a long long blink
--------------------- MERGED ---------------------------
Dougie... If all else fails, hold down vol+ for 9 seconds. This will reset the chips settings.
Oh yes i'm sure.
Now i see the correct blinking order yesterday not. It seemed the Trinket needed a full reset after UF2 flash by my side...But the problem remains i still can't choose/change payload with Vol+. There is not the counter's payload blink. And the console can't power off. It always reboots onto ArgonNX. No matter which payload manually chosen from ArgonNX menu.
Ah and i forgot to say that i can't boot into Hekate with Vol-/power anymore.
EDIT : Ok. Back to mode 1. Everything works as expected. Counter's payload blink is back. Power Off too. Vol-/power Hekate too.
So the problem is with the Mode 3 : ArgonNX. It's very persistent. On it you can't change payload with Vol+/Long press. Only manually.
Last edited by Dougiejones,
I know. ArgonNX is only 1 payload. I left it like that as I figured if people want to choose payload1.bin or payload2.bin or whatever, they would prefer to do it from ArgonNX menu.
I can make it autochainload like mode 1 etc if you like.
--------------------- MERGED ---------------------------
Don`t forget a 9 second press resets nearly all values (apart from usb strap)... 12 seconds resets usb strap detection. So its better to keep it plugged in to USB during detection!
Wait plz...I've done many tests...and sh...too i've corrupted the payload's icons in ArgonNX lol
Listen please. I don't understand what happened...but now everythings working EXCEPT the Power Off from SX OS Horizon payload.
It always reboot to ArgonNX in Mode 3 (after a while).
I'm quite sure i pressed vol+ too long at the 6 seconds (rapid white blink) for Modes blinked out.
No it's cool like this thank you.
Listen please. I don't understand what happened...but now everythings working EXCEPT the Power Off from SX OS Horizon payload.
It always reboot to ArgonNX in Mode 3 (after a while).
I'm quite sure i pressed vol+ too long at the 6 seconds (rapid white blink) for Modes blinked out.
No it's cool like this thank you.
Last edited by Dougiejones,
Hmmm... Needs a autohosoff routine adding to ArgonNX.
Will work on it tonight maybe. About had enough for today!
At the moment, only when vol pressed. You can hex edit it though.
I`ve been thinking of being able to use a jig to change modes for people who don`t have it fitted.
What chip are you using?
Similar threads
-
The Real Jdbye
*is birb* -
Dumpflam
-
-
-
-
@
BakerMan:
Update on my brother: He's home now, tired and hungry, obviously, but other than that, seems to be doing fine.+2 -
-
-
@
BakerMan:
Well, from what I've heard from my parents, he had a seizure last night, perhaps an epileptic episode, fucking died, had a near death experience, my dad called the paramedics, they showed up, took him to the hospital, and he woke up covered in tubes, and started complaining.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
