Only the top screen shows the luma/a9lh config iirc. Plug it back in and try again. Also just curious why did he have you unplug the screen? To get to something else in the 3ds?
he had me unplug the screen because he was thinking it may be a part.
I did that and it did not do anything so i know it was not a screen because i had unpluged both of them so we got that ruled out.
--------------------- MERGED ---------------------------
ok after getting my screens pluged back in i put did what you told me and it did not change. but i did have A9hl installed and don't have my card setup for that anymore and the newest luma on the card as well.
When you say the newest Luma, you don't mean v8.1.1 do you? That's B9S only and won't work with your A9LH setup. The last one you can use is v7.0.5. So make sure you have that version on your SD card as arm9loaderhax.bin and then we can go from there. Also, any payloads you have in the SD:/luma/payloads/ folder should also end in .bin
Yeah, sure. Here's Luma3DS v7.0.5: https://github.com/AuroraWright/Luma3DS/releases/download/v7.0.5/Luma3DSv7.0.5.7z
Put it on the root of your SD card as arm9loaderhax.bin. Try powering the 3DS up now and see if a config screen shows or if it stops on two blank screens like when there's no SD card.
Grab this version of GodMode9, and copy the GodMode9.bin file to the root of your SD card as arm9loaderhax.bin (replace Luma with it) and tell me what happens when you turn your 3DS on: https://github.com/d0k3/GodMode9/releases/download/v1.2.8/GodMode9-20170729-114727.zip
i get a black screen with no backlight and blue power light no system sound or wifi light.
so after all this i'm gonna call it a new kind of brick (could be hardwere along with it) i'm buying a system on ebay for $70 with a broken screen to replace the parts in this one and i think i will send the motherboard in to some one after i get my new parts to see what they think is going on.
@leerpsp i solved my problem now with some luck and patience!
ive tried to hardmod this console so one cable wasnt attached right. now i csan gm9 straight from my flashcard (thanks to the guys on discord wich gave me a flashable firm!)
now i cant do a ctrrnandtransfer, time to do some more research....
ive tried to hardmod this console so one cable wasnt attached right. now i csan gm9 straight from my flashcard (thanks to the guys on discord wich gave me a flashable firm!)
now i cant do a ctrrnandtransfer, time to do some more research....
Last edited by flow349,
What cable was it? i have taken mine 100% apart and put it back together 3 times and still did not work out for me.
i cant say but none of the screens. a small one at the top of the mobo between the two screens i think but im not sure. tomorrow i will make a photo (dont have a smartphone with me now) sorry
Last edited by flow349,
Hi guys,
I don't know why but Im having a problem with ntrboot
It used to work fine but now it will launch maybe 1 time on 50 tries.
It is a r4i gold with the boot9strap 1.3
The magnet is working when the console is ON and i keep it at that right spot.
It will just turn on and show a black screen untill I release the button and remove the magnet, it will load the system
I don't know why but Im having a problem with ntrboot
It used to work fine but now it will launch maybe 1 time on 50 tries.
It is a r4i gold with the boot9strap 1.3
The magnet is working when the console is ON and i keep it at that right spot.
It will just turn on and show a black screen untill I release the button and remove the magnet, it will load the system
Yes I do have all those files.
Shoud it work every time? I do press the button correctly
The new release just came out a few hours ago, probably a bug as I haven't heard of this issue with the older version of boot9strap. You may want to go report it on GitHub.
Similar threads
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
The Real Jdbye:
i have that stupid connector on my gpu luckily it's only a 300w gpu so i should(?) be fine since all the issues are with the quad 8pin->12pin and mine is only dual 8pin -
-
-
@
The Real Jdbye:
quite a tight bend on that 8pin->12pin adapter in my case, which is the worst case scenario, but i made sure it was fully seated after plugging everything in and bending the cable so it shouldn't come unseated by itself since i pre-stressed the cable
-
-
-
