Hacking 3DS NOOB PARADISE - Ask questions here

[Maishul]

There was a new Firmware update, if I'm on CFW should I not touch it, or am I good?

 

[Bohamad93]

There was a new Firmware update, if I'm on CFW should I not touch it, or am I good?

before update anything, BACKUP YOUR NAND.bin !

 

[djalmafreestyler]

Dos anyone can tell me the status of 11.1 after smea update otherap.

which hax is working? oothax, browserhax ...
Is NTR CFW working in Luma3DS regular version?

 

[Bohamad93]

Dos anyone can tell me the status of 11.1 after smea update otherap.

which hax is working? oothax, browserhax ...
Is NTR CFW working in Luma3DS regular version?

I did mine with menuhax. ropbin 11.1
(HBL)

 

[KunoichiZ]

Dos anyone can tell me the status of 11.1 after smea update otherap.

which hax is working? oothax, browserhax ...
Is NTR CFW working in Luma3DS regular version?

oothax is working, but only if you have a 3DS with 10.7 or lower as the oothax_sploit_installer only works on 10.7.0-32 or lower. Browserhax is still patched I think. NTR CFW is kinda working but I don't think there's an official release yet (I could be wrong on this).

 

[djalmafreestyler]

oothax is working, but only if you have a 3DS with 10.7 or lower as the oothax_sploit_installer only works on 10.7.0-32 or lower. Browserhax is still patched I think. NTR CFW is kinda working but I don't think there's an official release yet (I could be wrong on this).

Other hax aren't working?

 

[foreveryang]

should I update? also how do I update if I should. (O3DS Sys 11.0 Luma 6.1.2) i updated luma for the first time today, i don't know if that's the latest version. thx

 

[KunoichiZ]

Other hax aren't working?

No not yet.

 

[Latyana]

i updated my luma for the 3ds yesterday to use the NTR for a plugin i wanted to try out. now it makes a pop noise upon turning on and wont boot up. just goes back out. with charger in it it'll charge. i think thats a good sign. so basically im asking this did me updating the dern luma make this happen?? and also what is it that could be the cause of the pop?? i looked online someone on it points out the ribbons in the 3ds?? im not sure i understand that but i do need help getting this system reworking again. i was quite enjoying my hacked 3ds.

 

[infinete]

Following the new otp guide and downloading the ctr file, it says "2.1.0-4E_ctrtransfer_o3ds" but thats still ok for the new 3ds right? Probably 'cos the file is from an old 3ds I geuss?

 

[Latyana]

Following the new otp guide and downloading the ctr file, it says "2.1.0-4E_ctrtransfer_o3ds" but thats still ok for the new 3ds right? Probably 'cos the file is from an old 3ds I geuss?

ya it'll show o3ds on that. XD

--------------------- MERGED ---------------------------

Following the new otp guide and downloading the ctr file, it says "2.1.0-4E_ctrtransfer_o3ds" but thats still ok for the new 3ds right? Probably 'cos the file is from an old 3ds I geuss?

wait hun if your system is a new 3ds you will need something else if memory serves. ive read this stuff over and over again.

 

[infinete]

ya it'll show o3ds on that. XD

--------------------- MERGED ---------------------------


wait hun if your system is a new 3ds you will need something else if memory serves. ive read this stuff over and over again.

Having read the guide again it says

What you need

• You will need to have booted into Decrypt9 via one of the Part 1
• entrypoints
• The 2.1.0 ctrtransfer image for your device and region
  (if your device is not from one of these regions, just pick one):
  • Files per region

But the link only gives one file

 

[Karuley]

Having read the guide again it says

What you need

• You will need to have booted into Decrypt9 via one of the Part 1 - Decrypt9 entrypoints
• The 2.1.0 ctrtransfer image for your device and region
  (if your device is not from one of these regions, just pick one):
  • New 3DS or Old 3DS or 2DS 2.1.0 - EUR - ctrtransfer (mirror) (mirror)
  • New 3DS or Old 3DS or 2DS 2.1.0 - JPN - ctrtransfer (mirror) (mirror)
  • New 3DS or Old 3DS or 2DS 2.1.0 - USA - ctrtransfer (mirror) (mirror)

But the link only gives one file

it only gives you one file because you only need one, doesn't matter which 3ds you have

 

[cravas]

Having read the guide again it says

What you need

• You will need to have booted into Decrypt9 via one of the Part 1
• entrypoints
• The 2.1.0 ctrtransfer image for your device and region
  (if your device is not from one of these regions, just pick one):
  • Files per region

But the link only gives one file

You only need one file, the one for your region.

 

[Latyana]

Having read the guide again it says

What you need

• You will need to have booted into Decrypt9 via one of the Part 1
• entrypoints
• The 2.1.0 ctrtransfer image for your device and region
  (if your device is not from one of these regions, just pick one):
  • Files per region

But the link only gives one file

yeah it should be in there. even mine is showing that 03ds.

 

[infinete]

So I have done the new guide, got the otp bi, I can access the Luma config screen by holding select, but I cannot open the hourglass9 bin by pressing start, just a black screen. Any suggestions.

 

[Karuley]

So I have done the new guide, got the otp bi, I can access the Luma config screen by holding select, but I cannot open the hourglass9 bin by pressing start, just a black screen. Any suggestions.

did you do step 3? (taken from the guide)

1. Create a folder named luma on the root of your SD card
2. Create a folder named payloads in the luma folder on your SD card
3. Copy Hourglass9.bin from the Hourglass9 zip to the /luma/payloads/ folder on your SD card and rename Hourglass9.bin to start_Hourglass9.bin

 

[infinete]

Appreciated, I created the Payloads folder but forgot to put it in the Luma folder LOL. All is good now, thanks all.

 

[proflayton123]

Hi~

I'd like to use my N3DS XL without having to take out the mSD Card as that requires unscrewing the back etc..

I seen FTP Clients and things, although they confused me in the process, may someone pls post a guide on how to use for a noob, pls and ty~

 

[its-my-right]

Hi, I read the guide from Plailect and when downgrading, I managed to softbrick my 2ds...

I read it is better to format the console before downgrading, but I wonder how to do that and right then use sysDowngrader ?
I'm in 9.9.0-26E so my entrypoint is menuHax (installed from browserHax). But when I format the console (with or without the SD card in it), I'm then unable to launch Homebrew Launcher via the d-pad down pressing when powering on the console. So I guess menuHax does'nt work anymore after formatting the console (with or without the SD card in it).

So does "formatting the console before downgrading" means "format the console, then install menuHax, then downgrade" ?

I already softbricked a 2ds that way, and would like to try on a second, that's why I'm asking

Although, if you have any advice as how to maximise the chances to not get a softbrick while downloading that way, I would take it, as my second 2ds I want to try the downgrade on is my last one...

Thank you !

(sorry for the Frenchy English)