Toggle sidebar

Hacking 3DS NOOB PARADISE - Ask questions here

  • Thread starter Thread starter Cyan
  • Start date Start date
  • Views Views 5,705,490
  • Replies Replies 54,440
  • Likes Likes 44
BobDoleOwndU said:
Ah, that could be an issue. This is what I found on 1.0.1 of Smash Bros. and Smashhax. Sorry, but it doesn't look like the issue has been resolved yet.
Click to expand...
Oh.. well crap.
But, i was thinking, the update files are stored on the SD card right? Why wouldn't it be possible to just put the "correct" version files on the card?
 
Senator said:
Oh.. well crap.
But, i was thinking, the update files are stored on the SD card right? Why wouldn't it be possible to just put the "correct" version files on the card?
Click to expand...
The files are in the "Nintendo 3DS" folder somewhere, but nobody knows where. I don't think the file structure is understood enough to manually add the update directly to the SD, and there's probably encryption and other factors that are in the way as well.
 
BobDoleOwndU said:
The files are in the "Nintendo 3DS" folder somewhere, but nobody knows where. I don't think the file structure is understood enough to manually add the update directly to the SD, and there's probably encryption and other factors that are in the way as well.
Click to expand...
Well that sucks. So i just have to sell my soul to the devil so yellow (or someone else) could fix the 1.0.1 stock problem? *sigh* Been waiting so long to get this over with.
Thanks anyway..
 
ThirdNight said:
Terribly sorry of this has been answered before, I haven't seen the answer on the pages I've read, but I am currently using a N3DS with a sysNAND of 9.2 and redNAND of 10.7 (with HBL already working on sysNAND of course), I have no intention of getting arm9 or any other further hack of my system, I'm able to go into 10.7 via CakesFW so i'm wondering, lets say if 10.8, 10.9, 11.0, ... 12.0 and so on is released in the future, would I be able to just go into CakesFW and launch 10.7, and keep updating to whatever is the new firmware? Would it still work forever no matter what firmware comes out or is it that the current CakesFW is only compatible with some official nintendo firmwares?
Click to expand...
If Nintendo changes something you will have to upgrade the cfw. It's always best before you update a system to check if you have the newest version of your cfw. You should also look for reports of the update not working.
 
  • Like
Reactions: ThirdNight
Senator said:
Well that sucks. So i just have to sell my soul to the devil so yellow (or someone else) could fix the 1.0.1 stock problem? *sigh* Been waiting so long to get this over with.
Thanks anyway..
Click to expand...
Tho, maybe someone could upload their Correct SSB version files somewhere and perhaps i can investigate?
 
Hi, I'd like to know if Dstwo (not +, the old one) is not compatible with Reinand. What happened is that the last time I used it, after playing, my (3ds) microSD got corrupted (so I had to reinstall emunand, etc...). I don't know exactly if it's dstwo fault or maeby bad luck, but I've read some posts about dstwo not working in emunand (but don't know if this just happened in older versions). At the moment I'm using Reinand 10.7 in my N3ds.

Thanks in advance!
 
mepica said:
Hi, I'd like to know if Dstwo (not +, the old one) is not compatible with Reinand. What happened is that the last time I used it, after playing, my (3ds) microSD got corrupted (so I had to reinstall emunand, etc...). I don't know exactly if it's dstwo fault or maeby bad luck, but I've read some posts about dstwo not working in emunand (but don't know if this just happened in older versions). At the moment I'm using Reinand 10.7 in my N3ds.

Thanks in advance!
Click to expand...
Bad luck on your part. I have an old DSTWO and use it with ReiNAND, no problems. Though if you're using an MSET entrypoint to get to ReiNAND, I'd suggest changing it for MenuHax, that way you don't have to redo your MSET exploit every time you boot the DSTWO.
 
Last edited by Arecaidian Fox,
I have an old3ds on firmware version 7.1.0-16U.

I was looking at Plailect's guide on installing custom firmware, however as a starting point it seems to list what you should do based on version 9.0 or greater. Is it possible for me to upgrade to 9.0 without going all the way to 10.7?

I'm assuming upgrading to 10.7 would be a bad idea because I don't have cubic ninja or anything like that.
 
Sabaki said:
I have an old3ds on firmware version 7.1.0-16U.

I was looking at Plailect's guide on installing custom firmware, however as a starting point it seems to list what you should do based on version 9.0 or greater. Is it possible for me to upgrade to 9.0 without going all the way to 10.7?

I'm assuming upgrading to 10.7 would be a bad idea because I don't have cubic ninja or anything like that.
Click to expand...
Yes you can update to 9.2 directly.
 
  • Like
Reactions: Sabaki
Sabaki said:
I have an old3ds on firmware version 7.1.0-16U.

I was looking at Plailect's guide on installing custom firmware, however as a starting point it seems to list what you should do based on version 9.0 or greater. Is it possible for me to upgrade to 9.0 without going all the way to 10.7?

I'm assuming upgrading to 10.7 would be a bad idea because I don't have cubic ninja or anything like that.
Click to expand...
You should be able to use one of the other sysupdaters to bring ur system to 9.0-9.2
 
  • Like
Reactions: Sabaki
How can I edit in my boot.cfg - AuReiNand? When I boot ReiNand it just comes up with the splash screen and crashes..

Code: 
boot_config :
{
  timeout = 4;
  autobootfix = 8;
  recovery = 2;
  default = 1;
  entries = (
    {
      title = "ReiNand";
      path = "/ReiNand.dat";
      offset = "0x12000";
    },
    {
      title = "rxTools";
      path = "/rxTools/sys/code.bin";
      offset = "0x12000";
      key = 0;
    },
    {
      title = "HomeBrewMenu";
      path = "/boot_hb.3dsx";
    },
    {
      title = "HomeMenu";
      path = "homemenu";
    },
    {
      title = "Reboot";
      path = "reboot";
    },
    {
      title = "Shutdown";
      path = "shutdown";
    } );
  theme :
  {
    bgTop1 = "4a0031";
    bgTop2 = "6f0149";
    bgBottom = "6f0149";
    highlight = "dcdcdc";
    borders = "ffffff";
    font1 = "ffffff";
    font2 = "000000";
    bgImgTop = "/yourimage.bin";
    bgImgBot = "/yourimage2.bin";
  };
};
 
proflayton123 said:
How can I edit in my boot.cfg - AuReiNand? When I boot ReiNand it just comes up with the splash screen and crashes..

Code: 
boot_config :
{
  timeout = 4;
  autobootfix = 8;
  recovery = 2;
  default = 1;
  entries = (
    {
      title = "ReiNand";
      path = "/ReiNand.dat";
      offset = "0x12000";
    },
    {
      title = "rxTools";
      path = "/rxTools/sys/code.bin";
      offset = "0x12000";
      key = 0;
    },
    {
      title = "HomeBrewMenu";
      path = "/boot_hb.3dsx";
    },
    {
      title = "HomeMenu";
      path = "homemenu";
    },
    {
      title = "Reboot";
      path = "reboot";
    },
    {
      title = "Shutdown";
      path = "shutdown";
    } );
  theme :
  {
    bgTop1 = "4a0031";
    bgTop2 = "6f0149";
    bgBottom = "6f0149";
    highlight = "dcdcdc";
    borders = "ffffff";
    font1 = "ffffff";
    font2 = "000000";
    bgImgTop = "/yourimage.bin";
    bgImgBot = "/yourimage2.bin";
  };
};
Click to expand...
Change the reinand part to aureinand and the path to /aureinand.dat
 
Arecaidian Fox said:
Bad luck on your part. I have an old DSTWO and use it with ReiNAND, no problems. Though if you're using an MSET entrypoint to get to ReiNAND, I'd suggest changing it for MenuHax, that way you don't have to redo your MSET exploit every time you boot the DSTWO.
Click to expand...
Thanks a lot! =)
 
BootNTR is open source (MIT license) but it seems as though "the good part" is in ntr.bin? Is the source for that available (or am I just totally mistaken)?
 
Hello, quick and (hopefully) simple question. My N3DS is on 9.2 sysnand and (i'm 90% sure) the same version of emunand. I have the latest ReiNAND version (on my computer) and 3DNUS for getting the official N3DS firmware stuffs. So, which is the latest 'safe' firmware version to update emunand to, and in which order do I install them in in order to avoid screwing up my N3DS? As you can tell, i'm a wee bit distrustful of my own judgement/knowledge in this regard. Also, I have no interest in installing ARM9LoaderHax, just FYI. Thanks
 
ElectricJelly said:
Hello, quick and (hopefully) simple question. My N3DS is on 9.2 sysnand and (i'm 90% sure) the same version of emunand. I have the latest ReiNAND version (on my computer) and 3DNUS for getting the official N3DS firmware stuffs. So, which is the latest 'safe' firmware version to update emunand to, and in which order do I install them in in order to avoid screwing up my N3DS? As you can tell, i'm a wee bit distrustful of my own judgement/knowledge in this regard. Also, I have no interest in installing ARM9LoaderHax, just FYI. Thanks
Click to expand...
The newest fw is safest for emunand. Just got into system settings while in your emunand and select system update
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew  Twilight Princess Port Indev by Game of Tobi

[Project Idea] Super Mario Galaxy Demake for Nintendo 3DS

Homebrew Homebrew game  Legend of Zelda: A Link to the Past 3DS Port

[Project Idea] Splatoon Demake for Nintendo 3DS

Homebrew Project  reBadge is finally live!

Homebrew Misc Project  Looking for 3DS C++ Homebrew app developer

3DSCast -- A Podcast Focusing on the 3DS -- Launches Today

Hacking ROM Hack  System settings and Roms not launching