Homebrew Can't solve many problems, I'm dumb

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
Good evening. I'm ander, and this is my first thread on a forum. I know there are rules, but, really... I don't know where to start from. Please excuse me for the violation. If you're going to move this thread somewhere, thank you, really.

Anyway, I've recently downgraded my 3DS (Europe) from 10.3 to 9.2, and then installed Cakes CFW. No problems with that, but I was wondering about things, and other ones don't work. So, my questions are:
1) I can't play Pokémon Y online, it requires a new version, and I need to update the console to get it. Is it possible and safe or I'm stuck with 9.2 in both emuNAND and sysNAND? If not, which of the two can be updated?
2) I haven't tried it yet, but I was wondering how to run downloaded 3DS games. Do I need the FBI thing written over H&S app? I really don't know anything, so a guide would be appreciated.
3) I love GBA, and at the sight of mGBA I've tried to run a game. But, it doesn't work: I've tried to paste the .gba file in the root, too place it in /mGBA and in /3ds/mgba. I've also tried to create a GBA folder in the previous two folders, and still nothing. Don't know what to do.
4) I've downloaded 3DText, and I have to write a VERY LONG txt. This time, there are two problems: the first, it doesn't read any .txt outside of the default "test", which says "This is the file that it should print. If you see any errors, please report to DarkFlare.". If a new .txt is created alongside the test.txt, it won't be recognized, and 3DText will display the default one. The second problem is,I have a maximum of 28 lines, and I can't move in the file. So, if there are 30 lines, two of them won't be displayed. The question is: is it possible to write a single txt files without the limitation of 28 lines?

Sorry to the long and wrong-placed thread, you must be bored. And sorry again for all these stupid question, but I'm really dumb and impatient, and couldn't find anything elsewhere. I hope someone will answer me.
Thanks.
 

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
Thanks! This is really accurate, but I have Cakes CFW (and this doesn't indicate the RX at the beginning of the version... I must suppose that emuNAND is where I have FBI?), and installed FBI... Does this change something or the steps are the same? I don't have any BigBlueMenu, and don't know where to get/find/install AGB_FIRM... also, doesn't talk at all about 3DText. What should I do?

Sorry for the questions and thanks again for the guide. If the steps are the same, I should manage to do it.
 

QCLasky

Pro cat lover
Member
Joined
May 21, 2009
Messages
777
Trophies
1
XP
1,035
Country
Portugal
Thanks! This is really accurate, but I have Cakes CFW (and this doesn't indicate the RX at the beginning of the version... I must suppose that emuNAND is where I have FBI?), and installed FBI... Does this change something or the steps are the same? I don't have any BigBlueMenu, and don't know where to get/find/install AGB_FIRM... also, doesn't talk at all about 3DText. What should I do?

Sorry for the questions and thanks again for the guide. If the steps are the same, I should manage to do it.

When you access your emunand, enter on system settings, if you see something like RX-E on your system version then you are on emunand. Just update your system (emunand) there and you can play new games online
 
Last edited by QCLasky,

shaneod

Well-Known Member
Member
Joined
Mar 3, 2011
Messages
348
Trophies
0
XP
427
Country
When you access your emunand, enter on system settings, if you see something like RX-E on your system version then you are on emunand. Just update your system (emunand) there and you can play new games online
The op mentioned they're using CakesFW. CakesFW doesn't mention RX-E. It looks as if it's a regular FW in settings.
 

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
I guess the only way to check if I am in emuNAND or in sysNAND is to see if the H&S app is replaced with FBI, right?
So, if this is correct, does the new update replace FBI with H&S back or everything will remain the same?

Also, I've read that I must install GBA games in both sysNAND and emuNAND in order to run them. But how do I install them in sysNAND without FBI? I have only H&S app in sys... Or do I need that AGB_FIRM thing?
 

TrashyClassy

Professional Shitposter
Member
Joined
Sep 26, 2015
Messages
207
Trophies
0
Location
Planeptune
XP
201
Country
Malaysia
I guess the only way to check if I am in emuNAND or in sysNAND is to see if the H&S app is replaced with FBI, right?
So, if this is correct, does the new update replace FBI with H&S back or everything will remain the same?

Also, I've read that I must install GBA games in both sysNAND and emuNAND in order to run them. But how do I install them in sysNAND without FBI? I have only H&S app in sys... Or do I need that AGB_FIRM thing?
You dont need the AGB_FIRM thing if you have O3DS/2DS
 

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
Got it... So, what do I do? I don't have BigBlueMenu, I've just unlinked the two NANDs with TinyFormat. How to run them, then?
 

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
The only way I have to boot homebrew is by holding L when the console is booting on. The CRLTools screen appears, and from there I can run Cakes CFW OR homebrew. Is there a way to launch homebrew from emuNAND?

But maybe you meant sysNAND... in emu, I have FBI, but not in sys, if this may help (man, I feel REALLY annoying. It's just that doing everything in the right way really drove me mad. My apologies for the noobness).
 

TrashyClassy

Professional Shitposter
Member
Joined
Sep 26, 2015
Messages
207
Trophies
0
Location
Planeptune
XP
201
Country
Malaysia
The only way I have to boot homebrew is by holding L when the console is booting on. The CRLTools screen appears, and from there I can run Cakes CFW OR homebrew. Is there a way to launch homebrew from emuNAND?

But maybe you meant sysNAND... in emu, I have FBI, but not in sys, if this may help (man, I feel REALLY annoying. It's just that doing everything in the right way really drove me mad. My apologies for the noobness).
You could launch homebrew from emuNAND from running browserhax
 

wormdood

pirate booty inspector
Member
Joined
Jan 3, 2014
Messages
5,256
Trophies
2
Age
38
Location
behind a parental advisory sticker
XP
4,192
Country
United States
The only way I have to boot homebrew is by holding L when the console is booting on. The CRLTools screen appears, and from there I can run Cakes CFW OR homebrew. Is there a way to launch homebrew from emuNAND?

But maybe you meant sysNAND... in emu, I have FBI, but not in sys, if this may help (man, I feel REALLY annoying. It's just that doing everything in the right way really drove me mad. My apologies for the noobness).
ues this to get fbi on your sysnand [Release] Inject any app into Health & Safety (O3DS/N3DS/CFW only)
and as far as hbc from emunand you can install this https://github.com/yellows8/hblauncher_loader to emunand
 

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
I'll try it then.... Thank you, really! If I have issues, I'll let you know.

--------------------- MERGED ---------------------------

Waaaaiiiit, I was wondering! I already have FBI in emuNAND. Does this change anything? Or the steps are the same?
 

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
I've dumped the H&S app from both emuNAND and sysNAND, and put hs.app and hs.enc into the /input folder of Universal Inject Generator. However, running the go.bat doesn't do anything. It just says "press a key to continue", and if I press a button, it closes immediately and doesn't generate any file to inject. What do I do?
 

ander

Well-Known Member
OP
Member
Joined
Jan 19, 2016
Messages
112
Trophies
0
Age
26
XP
98
Country
Italy
Well, problem solved for emuNAND. FBI works correctly. But in sysNAND the app just disappeared... Although I've chose "H&S Inject", as written in the guide. What have gone wrong? How to fix that and get FBI in sys too?
 

wormdood

pirate booty inspector
Member
Joined
Jan 3, 2014
Messages
5,256
Trophies
2
Age
38
Location
behind a parental advisory sticker
XP
4,192
Country
United States
Well, problem solved for emuNAND. FBI works correctly. But in sysNAND the app just disappeared... Although I've chose "H&S Inject", as written in the guide. What have gone wrong? How to fix that and get FBI in sys too?
. . . are you in rxtools sysnand. . . or real nand sysnand
because if you dont boot rxtools sysnand then thats totally normal behavior . . .
starting with the power off power on and when you see the rxtools screen hold "L" and then press "A" then "X" then hold the button to skip menuhax you should load into rxtools sysnand there h&s/fbi should exist
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Xdqwerty @ Xdqwerty: See ya see ya later later