Desktop Crashed, Won't Turn On

I don't know of any good ways to test the motherboard. Too many parts of a motherboard that can fail for different reasons.
Motherboard testers? :P I love mine. I can diagnose a problem quickly without detaching and reattach crap for hours.
 
  • Like
Reactions: Originality
This happened to me exactly the same as the OP. I checked all the voltages on my PSU and could find nothing amiss. Then I went out and bought a laptop.
 
raulpica, you actually have a use for your PC test cards? I think I only have mine for the same reason I occasionally use the command line when fixing a computer.

Edit. That said it does come with a male-male USB cable.
 
Plugged in another PSU, everything booted up normally. So it looks like my suspicions were right, the PSU is bad.
Funny, I guess only the +5V lane went bad. Rare case, usually it's the +12V which dies, and the PC won't boot up at all in that case.

raulpica, you actually have a use for your PC test cards? I think I only have mine for the same reason I occasionally use the command line when fixing a computer.

Edit. That said it does come with a male-male USB cable.
I use it to check if there's something preventing the PC from booting. CPU not recognized (00), and I'll check the CPU... DRAM error (35, IIRC?) and I'll check the RAM. Something else and I'll check the VGA. Blah blah.

The USB male-to-male is for powering it as some slots don't send enough power it seems? It could actually work via USB as _some_ motherboards actually send the 07h (or something like that) interrupts over USB as well. Pretty rare, though.

IIRC, the USB male-to-male was only present on my laptop card, not on the desktop ones. That's probably because the PCIe ports don't enough power, when compared to the bigger ones?

Who knows :P
 
Funny, I guess only the +5V lane went bad. Rare case, usually it's the +12V which dies, and the PC won't boot up at all in that case.


I use it to check if there's something preventing the PC from booting. CPU not recognized (00), and I'll check the CPU... DRAM error (35, IIRC?) and I'll check the RAM. Something else and I'll check the VGA. Blah blah.

The USB male-to-male is for powering it as some slots don't send enough power it seems? It could actually work via USB as _some_ motherboards actually send the 07h (or something like that) interrupts over USB as well. Pretty rare, though.

IIRC, the USB male-to-male was only present on my laptop card, not on the desktop ones. That's probably because the PCIe ports don't enough power, when compared to the bigger ones?

Who knows :P


I just take a multimeter/voltmeter to the board LIKE A BOSS! Who needs test cards when you can do it the hard way ;). Its at least funner this way? lol
 

Site & Scene News

Popular threads in this forum