Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,152,096
  • Replies Replies 47,998
  • Likes Likes 66
  • Like
Reactions: simsimsim, xxjuanandresxx, Blythe93 and 1 other person
xxjuanandresxx said:
Hey people, I hope you are having a nice day.

Well I got a Unpatched Nintendo Switch v1(XAJ7000..) with auto-RCM mode ON, that I can't inject payloads (tried with Hekate). TegraRCM freezes and Rekado does nothing but saying "Unable to get device ID"
My switch has the latest firmware and I heard in forums that maybe it was the cable I was using or the SD card, well I tried with 6 different cables that supports File Transfer and 3 different SD's (Using FAT32 and exFAT formats) and I had the same problem.
I though it was the battery so I tried to charge it by the night by connecting a original charger to it, then press the power button by 30 seconds to assure that the switch got out from the RCM mode.
But the results are the same. I can't do anything here because the switch refuses to receive payloads. Even I tried to power off the switch completely than connect the cable to the PC/Phone to inject the payload, and I tried to reset the console with the cable connected but nothing happens.

I don't know if buying a portable RCMLoader will fix the issue but I can't do anything right now, thank you for your time.

EDIT: Also I tried to inject payloads that does not need SD files as BiskeyDump but also fails
Click to expand...

Should be able to inject Hekate if you are on AutoRCM, if you aren't on autoRCM then you need a jig to get into RCM mode. Also check to see if you have the driver suggested above.
 
  • Like
Reactions: xxjuanandresxx, Blythe93 and BigOnYa
Gerbi13 said:
yes, I think so
BTW, I got my switch to start with the boot.dat? error
Click to expand...
I would recommend deleting all of the files from your SD card and downloading new ones online. You can download Atmosphere from its official GitHub page as well as Hekate from its respective page if you use it. If you also pirate games, you will need to redownload the patches from this thread.
 
  • Like
Reactions: Blythe93
Hayato213 said:
Should be able to inject Hekate if you are on AutoRCM, if you aren't on autoRCM then you need a jig to get into RCM mode. Also check to see if you have the driver suggested above.
Click to expand...
My PC detects the Switch on RCM mode

1707323503452.png


Then after I click inject:

1707323536072.png


The SD is correct inserted on the Switch, what would you think is wrong, even I tried to inject Payloads that does not require SD data as BisDumpKey, an nothing happens, Maybe the USB Port is damaged?
 
xxjuanandresxx said:
My PC detects the Switch on RCM mode

View attachment 418720

Then after I click inject:

View attachment 418721

The SD is correct inserted on the Switch, what would you think is wrong, even I tried to inject Payloads that does not require SD data as BisDumpKey, an nothing happens, Maybe the USB Port is damaged?
Click to expand...
It looks like you are trying to push an old Hekate.bin (5.00) try this one instead (6.0.7): https://github.com/CTCaer/hekate/releases
Or the Fusee.bin from here: https://github.com/Atmosphere-NX/Atmosphere/releases
 
Last edited by BigOnYa,
  • Like
Reactions: Hayato213
  • Like
Reactions: BigOnYa
xxjuanandresxx said:
View attachment 418755

Sorry for not including more info on the screenshot..
Yes I am injecting updated .bin files, also I copied the 6.0.7 Hekate files into a empty clean SD and nothing happens
Click to expand...

Doesn't seem it wants to inject the payload, you might want to try another port/another usb c cable, worse case try another computer
 
Hayato213 said:
Doesn't seem it wants to inject the payload, you might want to try another port/another usb c cable, worse case try another computer
Click to expand...
I tried with 6 different cables and 2 different PC's and one Android phone with Rekado. Nothing happens.
One of the cables was the Nintend original cable so I think is something with the console.
 
I am currently in the process I’m getting ready to install a modchip on my switch oled. I am using an RP 2040 tiny from waveshare. I was not aware until recently that people often install resistors along with the mod chip, and I have been unable to find any links or exact specs for the resistors used. I have heard of people using 10 and some using 47 ohm resistors (and I have not seen anyone specify wattage), so I am not sure what is right. Any and all help (especially links!) is appreciated.
 
Last edited by Modder_Boi,
Having an absolute Time with my switch.
I learned that it does not like when nintendo servers are blocked. Not an issue so far, as I don't plan on going online or using the net much for now, but still an issue. What's the best way to combat this?
(To be crystal clear, the error code was 2155-8007)

I also delinked my nintendo account for obvious reasons. And during all this, I archived Animal Crossing, and now cannot get it back without a backup. For backed up games seperated into multiple files (eg part1, part2) how does that work on switch? I'm really, really confused about that.
 
bootablemediadisc said:
Having an absolute Time with my switch.
I learned that it does not like when nintendo servers are blocked. Not an issue so far, as I don't plan on going online or using the net much for now, but still an issue. What's the best way to combat this?
(To be crystal clear, the error code was 2155-8007)

I also delinked my nintendo account for obvious reasons. And during all this, I archived Animal Crossing, and now cannot get it back without a backup. For backed up games seperated into multiple files (eg part1, part2) how does that work on switch? I'm really, really confused about that.
Click to expand...
https://rentry.co/ExosphereDNSMITM
https://gbatemp.net/threads/90dns-dns-server-for-blocking-all-nintendo-servers.516234/post-10329551
 
  • Like
Reactions: Blythe93
Hayato213 said:
Your serial number blanked out? You using Linalho?
Click to expand...
It was a digital copy of the game -_- I will just reinstall the game, I was wondering about games that get broken up into multiple files
Post automatically merged:

bootablemediadisc said:
It was a digital copy of the game -_- I will just reinstall the game, I was wondering about games that get broken up into multiple files
Click to expand...
No, I am not using Linalho. I had to look it up actually XD
 
bootablemediadisc said:
It was a digital copy of the game -_- I will just reinstall the game, I was wondering about games that get broken up into multiple files
Post automatically merged:


No, I am not using Linalho. I had to look it up actually XD
Click to expand...

What firmware are you on, is your serial number blanked out?
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Dekopon - (Mostly) Fullspeed 3DS Emulation on Nintendo Switch

Emulation Emulator  Cemu - Wii U Emulator - Switch Port

Emulation Emulator  Dolphin - GC/Wii Emulator - Switch Port

Emulation Emulator  DrasticDS Emulator - Switch Port

Raikopon - a speedy, experimental 3DS emulator for Nintendo Switch (Dekopon Fork)

Emulation Gaming Homebrew Others Homebrew app Emulator  [Nintendo Switch] Raika Azahar - The 3DS Emulator aimed at base Nintendo Switch

Homebrew Homebrew game  Plants vs Zombies Fusion - Switch Port

Homebrew Homebrew game  Animal Crossing: Pocket Camp Complete - Switch Port