Just almost successfully RGH'd my Jasper 360 with a Matrix glitcher and Matrix flasher using this guide https://www.se7ensins.com/forums/th...get-a-cr4-like-experience-phats-only.1349194/
Everything has gone fine more or less first time except when I come to the final step which is to flash the patched image. The console boots past the Xbox 360 logo and then freezes at the dashboard anything between a second and a minute after booting.
I've tried the alt CLK point under the board and also the tiny one near the fans both with the exact same result.
Is there anything else I should try wiring-wise or does it sound more like a fault with the image I flashed?
I should clarify Jrunner also reports no bad blocks and I have 3 matching NAND dumps.
Everything has gone fine more or less first time except when I come to the final step which is to flash the patched image. The console boots past the Xbox 360 logo and then freezes at the dashboard anything between a second and a minute after booting.
I've tried the alt CLK point under the board and also the tiny one near the fans both with the exact same result.
Is there anything else I should try wiring-wise or does it sound more like a fault with the image I flashed?
I should clarify Jrunner also reports no bad blocks and I have 3 matching NAND dumps.
Last edited by britain4,