Official WupInstaller y Mod - with multiple install folders

Discussion in 'Wii U - Homebrew' started by Yardape8000, Oct 23, 2016.

  1. monkeyman4412

    monkeyman4412 Gbatemp's moronic trash

    Member
    5
    Jun 16, 2016
    United States
    Darn, I can't come up with something edgy
    Ok so I have a microsd adapter, and a Samsung evo 64gb microsd. The adapter makes into a full sd card. So the thing is the wiiu can read the sd card when formated as fat32 (proven by smash being able to read it) BUT if I put files into a install folder. Wup installer will read the folder and detect it/ But then it will claim its not dlc, game or update. Which if I try with a sd card that is 4 times smaller, (16gb) It will read it just fine! Somebody help, or is there a fix for this? It happens on both wupinstallers (y mod and gx2 installable channel)
     
  2. WiiFoundLove

    WiiFoundLove GBAtemp Regular

    Member
    3
    Jan 18, 2015
    Afghanistan
    Hi!

    I have a problem installing big games to the USB-Storage. I get the Message:

    Install of title 00000000-00000000 failed.
    install/GAME NAME
    Error: MCP_InstallGetInfo 0xFFFBF3E2
    Confirm complete WUP files are in the folder. Try power down.

    Any idea?
     
  3. RyanAnayaMc

    RyanAnayaMc The ACE

    Member
    3
    Oct 5, 2015
    United States
    You could have a bad WUP. Make sure the whole thing transferred over. Try deleting the WUP you're trying to install and re-copy it over. If that fails, delete it off our PC and download it again.
     
  4. WiiFoundLove

    WiiFoundLove GBAtemp Regular

    Member
    3
    Jan 18, 2015
    Afghanistan
    Ouh, that was my fault. Didn't knew that i can't use special chars in folder names. Just saw it. So all games run fine. :)
     
  5. cloud4571

    cloud4571 Member

    Newcomer
    2
    Sep 5, 2008
    United States
    I'm having an issue were the game is installing and stops between 30 and 40 pct ive tried formatting my hdd and the sd card and also re downloading the title from usb helper. i use the move to sd with usb helper also.
    the hdd was formatted by the wiiu and ive tried different games.
    i was using the hdd to load games on my wii so i know it works
     
  6. pearlfect

    pearlfect Member

    Newcomer
    1
    May 13, 2017
    So I installed Kirby's Adventure with Wii U USB Helper (the Wii EUR version of Return to Dream Land, not the NES game) and copied it to SD card, and am trying to install it on Wii U with WUP Installer, but whenever I install it to either NAND or USB, it just says 'Confirm complete WUP files are in folder'. I read something on here about special characters so I removed the apostrophe, but still the same error comes up.
     
  7. pearlfect

    pearlfect Member

    Newcomer
    1
    May 13, 2017
    Still looking for an answer to this. I know the method I'm using works, because I used the Wii U USB Helper to install SM3DW to NAND, but it still says the same thing with Kirby's Adventure as above.
     
  8. RyanAnayaMc

    RyanAnayaMc The ACE

    Member
    3
    Oct 5, 2015
    United States
    Make sure your folder structure is like this:
    SD:/install/SM3DW/[all your .app and .h3 files and whatnot]. If you happen to have your .app and .h3 files in another folder inside your SM3DW folder, it won't work. Also, make sure everything transferred.
     
  9. dumbninja22

    dumbninja22 Member

    Newcomer
    1
    Jul 9, 2017
    Canada
    How do I install both the game and the update with this?
     
  10. kokkie20

    kokkie20 Advanced Member

    Newcomer
    3
    May 7, 2008
    United States
    I got a problem with the installer.
    My wii u forced updated to 5.5.2 (Before i could stop it....)
    Now i want to install the homebrew channel launcher (so i can easy access it in rednand/mocha)
    But as soon as i want to install the launcher i get this error:
    0xFFFBF442
    How can i install it? It does the same with any game i try.
    I can't acces the HBC trough rednand as the web is patched, can you please help me :( ?
     
  11. RyanAnayaMc

    RyanAnayaMc The ACE

    Member
    3
    Oct 5, 2015
    United States
    Maybe you need to be running a CFW? Since you have 5.5.2 (and presumably not Haxchi or CBHC) you probably have to wait for a new browser exploit. Even if you could install the Homebrew Launcher, you won't be able to launch it without running CFW (HBL isn't a legit title, signature checks won't let it through), so it's pretty much pointless installing it without access to CFW.
     
  12. kokkie20

    kokkie20 Advanced Member

    Newcomer
    3
    May 7, 2008
    United States
    I do have haxchi, but when i start my wii, i open the haxchi channel.
    Then i press the corresponding button (in my case 'a'. It launches homebrew launcher. Then i can open anything i want. But i cant install anything without getting that error.
     
  13. nexusmtz

    nexusmtz GBAtemp Maniac

    Member
    6
    Feb 17, 2016
    United States
    You have to start Haxchi twice. The first time, you want to run Haxchi's sysmenu option to activate the signature patching. (You might have that set as default, so try not pressing anything when you start Haxchi.) After you're back at the Wii U menu, you run Haxchi again and press 'A' to start Homebrew Launcher.
     
  14. the_randomizer

    the_randomizer The Temp's official fox whisperer

    Member
    22
    GBAtemp Patron
    the_randomizer is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Apr 29, 2011
    United States
    Dr. Wahwee's castle
    I have an odd issue with this app. I load Haxchi first (CFW, holding B), then I load CFW and HBL, then Wupinstaller Y Mod. Well, it shows a white screen with the loading music. I tried to load HBL without Haxchi and got a system menu error. Why is the app just hanging and refusing to load? What the hell? It used to work before. Unless I have to go back to the ELF version of HBL instead of the RPX version or what?

    If this is gonna give me this much trouble, I may as well just update to 5.5.2.

    Edit: Am I doing something wrong? Again, I load Haxchi, hold B for CFW, and from there I load the HBL channel. Once I open that, I open Wup Y Mod and it just hangs there, loading with the Wii U menu logo, but it never goes to the app itself. What gives? Am I suppose to load the webkit exploit instead and then the app or what?

    Edit 2: Well, since I see nothing regarding this issue, I may as well update to 5.5.2.
     
    Last edited by the_randomizer, Jul 20, 2017
  15. BIFFTAZ

    BIFFTAZ GBAtemp Advanced Fan

    Member
    5
    Jul 26, 2010
    Try some of the basic things first before you have a tantrum here & threaten to update to 5.5.2 (<lol... No one gives a flying **** whether you do or not... So...)

    Try another SD with wup installer & the files you want to install & see if it works, Try deleting wup installer & download fresh from here & see if it just works... Try using Mocha CFW to install & see if it works.... Try wup installer GX & see if that way works for you.. Try & narrow it down yourself & see if you can find out why this is happening ;)
     
    Last edited by BIFFTAZ, Jul 20, 2017
  16. the_randomizer

    the_randomizer The Temp's official fox whisperer

    Member
    22
    GBAtemp Patron
    the_randomizer is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Apr 29, 2011
    United States
    Dr. Wahwee's castle

    That's just it though, I've installed numerous updates and USB games with this very SD card, using the set up I have now. I don't have Mocha on my SD cards either, I've always used Haxchi + CFW (the holding B button method when loading Haxchi). Then I proceed to load the installed HBL channel with with sigpatches enabeled. I suppose I can try my other 16 GB SD card to see. It's just baffling that it didn't return an error, just an infinite loading screen. I'll try that after I try WUP installer GX2. What does the Install folder need to be?

    SD:/Install with all the update files?
    SD:/Install/game 1 update/all update files?

    What brand of SD card should I get if it is the cause? I mean, if it were corrupted surely nothing would load, I assume.


    Edit: Using the GX2 version loaded this time. I think the WUP Y Mod folder was simply corrupted. Well I'm an idiot.
     
    Last edited by the_randomizer, Jul 20, 2017
    BIFFTAZ likes this.
  17. BIFFTAZ

    BIFFTAZ GBAtemp Advanced Fan

    Member
    5
    Jul 26, 2010
    Same as wup installer.
     
  18. the_randomizer

    the_randomizer The Temp's official fox whisperer

    Member
    22
    GBAtemp Patron
    the_randomizer is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    Apr 29, 2011
    United States
    Dr. Wahwee's castle
    See edit I made above.

    Hackers do what Nintendont
     
    Last edited by the_randomizer, Jul 20, 2017
  19. kokkie20

    kokkie20 Advanced Member

    Newcomer
    3
    May 7, 2008
    United States
    Ok when i start haxchi for the first time (Not pressing any button ,and have the default to: sysmenu (Even tried to mocha.elf)
    It auto boots up rednand (So i cant acces haxchi anymore....)
    What am i doing wrong? (Sorry for the stupid questions, just trying to understand what i am doing wrong here :( )

    edit:
    Ok i setted it up so it boots to mocha
    But as soon as mocha boots up it just freezes up (Have to shut down the wii to gain control of it again)
    Any suggestion :( ?
     
    Last edited by kokkie20, Jul 20, 2017
  20. nexusmtz

    nexusmtz GBAtemp Maniac

    Member
    6
    Feb 17, 2016
    United States
    Set default=sysmenu and a=wiiu/apps/homebrew_launcher/homebrew_launcher.elf in sd:/haxchi/config.txt
    Rerun haxchi installer so those changes take effect
    Restart the WiiU
    Run haxchi
    Don't press anything
    Do you get back to the WiiU Menu?

    If you get back to the WiiU Menu, run haxchi again and start homebrew launcher using 'A', then try your install.
     
Loading...