Hacking WiiVC Gamecube games give a black screen

[waytoodeep03]

I have followed this tutorial to a "T" using the TechMoon VC injector


When I go to try to play the game I either get frozen on the nintendont loading the mem card or I get a black screen all together.

This happens right after the Wii splash screen appears.

My setup uses the western digital 2tb hard drive connected to the back of the WiiU via y-cable.
Everything else works like wii u games and wii VC games injected with this same tool. For some reason gamecube games are not working

Is there any way to make this work properly?

 

[JayMathis]

I tried to watch that video to see if he's giving you good info but I turned it off in seconds just can't understand that dude. I will just ask did you install Nintendont on your sd card?

 

[waytoodeep03]

I tried to watch that video to see if he's giving you good info but I turned it off in seconds just can't understand that dude. I will just ask did you install Nintendont on your sd card?

Sorry that was the wrong video i updated it.

I just followed what he said and downloaded the nintendont via the tech moon injector.

 

[JayMathis]

Put your sd card in your computer and make sure there's an apps folder and nintendont insider that folder, and inside that should be meta.xml and boot.dol. If not it's not installed correctly.

 

[waytoodeep03]

Put your sd card in your computer and make sure there's an apps folder and nintendont insider that folder, and inside that should be meta.xml and boot.dol. If not it's not installed correctly.

Thanks Jay so there is a nintendont folder inside apps that has those files.

Is there another way to load these games?

Supposedly this vc injector is supposed to have nintendont installed alongside the games. but obviously it isnt working.

Another thing I tried was to load haxchi first then try the games but still same black screen issue.

 

[JayMathis]

Are you using a legit external hard drive with y cable or are you installing to internal? If not already try to install to internal.

 

[waytoodeep03]

Are you using a legit external hard drive with y cable or are you installing to internal? If not already try to install to internal.

Yea installing to the NAND worked. No idea why it didnt work from the external hard drive

 

[zerofalcon]

Before launching the gamecube game installed on your HDD, try launching the vWii mode first (ie. the Wii menu). Return to Wii U menu, proceed to load the method of hacking (CBHC if theres already present, haxchi, web browser exploit, etc) and then launch the GC game. There are some SD cards that are not compatible and refuse to load Nintendont, try experimenting with different SD cards at hand. I use a 512 mb kingston SD (very old) and thats the only SD card that works for me for this method, even I tried lots of SD cards (brands, micro SD adapters and different capacities). Hope it works for you.

 

[JayMathis]

Nevermind you have a y-cable. I'm not sure why either but try what zerofalcon said.

 

[90sNath]

(facepalm) guys you do know it's because your gamecube controller adapter is plugged in right? If anything usb other then the usb drive is plugged in. The game will just black screen. If you are using gamecube controllers. Unplug the adapter as you start up, wait til you see maybe a progressive scan screen or anything at all, then reply them in.

 

[JayMathis]

(facepalm) guys you do know it's because your gamecube controller adapter is plugged in right? If anything usb other then the usb drive is plugged in. The game will just black screen. If you are using gamecube controllers. Unplug the adapter as you start up, wait til you see maybe a progressive scan screen or anything at all, then reply them in.

You could have just explained this without the snarkiness. I've never owned a gamecube controller adapter so it's kind of difficult for me to tell someone that's the problem. If the op has one in you're probably right but they didn't even say they had one.

 

[zerofalcon]

(facepalm) guys you do know it's because your gamecube controller adapter is plugged in right? If anything usb other then the usb drive is plugged in. The game will just black screen. If you are using gamecube controllers. Unplug the adapter as you start up, wait til you see maybe a progressive scan screen or anything at all, then reply them in.

No, the Wii U gamecube adapter (official or third party) connected or disconnected has nothing relevant to the black screen when using injected GC games. No one knows exactly what triggers this issue but there are workarounds like the one I mentioned in my earlier post.

 

[JoseDelAtaud]

Sorry for the late entry. Maybe you will not find it useful anymore, but I experienced quite the same problem as you on a Wii U of mine. It turns out it wasn't a software issue, but a hardware one.

The upper USB port in the backside of the console wasn't providing 5.1v as it should, so I realised the cause might have be related to this lack of power. Therefore, I decided to replace the components in the line just to test the theory. I replaced the components with what I believe to be some sort of voltage regulator and the SMD capacitor close to it I took from a dead Wii U I have laying around here and it worked again.

 

[mikenz83]

Hey guys, did anyone figure this out truly
My situation is

• Modded Wiiu
• Up to date version of nintendont on SD card
• injected GC games both from Umuvci and teconmoon to be certain
• Injected to both the USB external drive i am using and internal storage

when i load game it follows the below

• Game splash screen comes up showing virtual console and game to be played
• Message appears stating i can use wiiu game pad to control and asking if i want to ( ive tried both yes and no )
• CD drive motor initialises
• Wii splash screen kicks in
• Green bar that looks like a very distorted image appears at bottom of screen
• Screen goes black and system does nothing else

The system is on and when i touch the game pad i get an error icon ( basically telling me touchscreen wont work )

open to ideas at this point