What could happen..

[SStarshine]

 

[SylverReZ]

I am confused as to what you're trying to achieve here.

Post some context.

 

[RyanTheArchivist]

I am confused as to what you're trying to achieve here.

Post some context.

Looks like they have an HDMI and Composite connection at the same time

 

[SStarshine]

Looks like they have an HDMI and Composite connection at the same time

Yep, my doubt is if the console will be bricked, or will it boot normally through the two outputs

 

[Blythe93]

I doubt that you'll be able to get a video output from both at the same time, no?

 

[BigOnYa]

I bet it will show video out to your last output used in your settings regardless, but if you go into settings you can change to either one.

 

[SStarshine]

I bet it will show video out to your last output used in your settings regardless, but if you go into settings you can change to either one.

But the composite cable has a tab that doesn't allow the HDMI to go in, so I don't think there's a selection between outputs.

 

[BigOnYa]

But the composite cable has a tab that doesn't allow the HDMI to go in, so I don't think there's a selection between outputs.

I was talking about in the dashboard settings page, can change video out - Composite/ Hdmi.

 

[fringle]

It will most likely only display video over the composite connection. This is due to the bridging of the pins on the connector that enable/disable video modes. You should however be able to configure audio to output through the hdmi if you have a receiver with an hdmi connection.

 

[SStarshine]

I use two monitors, on the composite, when accessing the system configuration and seeing the output, it says it is HDMI, but on the HDMI it says it is connected via composite, lol

 

[TheStonedModder]

Yep, my doubt is if the console will be bricked, or will it boot normally through the two outputs

Its not gonna brick the console lmao

 

[SylverReZ]

Looks like they have an HDMI and Composite connection at the same time

Ah, @ProjectGD. Don't think attaching both HDMI and Composite cables at the same time will work. It doesn't brick your Xbox 360, but it won't display anything.

As for configuring the video out, navigate to 'Settings' and there should be an option to change the video output settings under 'Video' or something.