Woo, fixed the black and white issue on my end. Forgot to flip the switch on the component cable from "tv" to "hdtv".
WOOO!
WOOO!
Hacking Waninkoko's Backup Loader FAQ
- Thread starter Praetor192
- Start date
- Views 292,350
- Replies 1,053
Just tried Soul Calibur but the backup creator turned a 4.37gb ISO into a 8.36gb ISO. So I won't be testing that one since I can't get that much info on a dual layer even with overburn activated. It says that there isn't room once it adds the leadout. Even if I turn on the short lead out it still won't fit.
Why would it have made the ISO bigger? There other two games that I tried were actually smaller by about 40mb.
UPDATED EDIT
Ok, ignore this. I copied the file to a new folder and now windows is telling me that it is only 3.99gb. That was weird...all I had to do was move it to a new folder and then burn it. Must have been some weird XP glitch. The backup creator said completed and to press any key, but maybe it still had a hold on it or something....I don't know. As soon as it's burned, I'll let you know if it worked or not.
Why would it have made the ISO bigger? There other two games that I tried were actually smaller by about 40mb.
UPDATED EDIT
Ok, ignore this. I copied the file to a new folder and now windows is telling me that it is only 3.99gb. That was weird...all I had to do was move it to a new folder and then burn it. Must have been some weird XP glitch. The backup creator said completed and to press any key, but maybe it still had a hold on it or something....I don't know. As soon as it's burned, I'll let you know if it worked or not.
Alright new issue here
Trying to make "Guitar Hero 3 Custom - Rockin the 80s" work. It's supposed to be a PAL version however plays like a copy protected disc for me.
Dumped the ISO into WiiFree and used
1. "PAL -> NTSC-U"
2. "Smart Patcher"
3. Do Not Change (language)
And then when I try and use that new ISO in the "Backup Creator" i get:
[*] ERROR: Could not get partition title key!
[*] Press any key to exit...
Any ideas?
Trying to make "Guitar Hero 3 Custom - Rockin the 80s" work. It's supposed to be a PAL version however plays like a copy protected disc for me.
Dumped the ISO into WiiFree and used
1. "PAL -> NTSC-U"
2. "Smart Patcher"
3. Do Not Change (language)
And then when I try and use that new ISO in the "Backup Creator" i get:
[*] ERROR: Could not get partition title key!
[*] Press any key to exit...
Any ideas?
Are you dragging and dropping the ISO onto backup-creator.exe or right clicking opening with?Midnightzak said:
THIS MAY BE IMPORTANT FOR SOME PEOPLE::
Just now I burned a copy of Mario Kart(PAL) to run on my wii(NTSC). In order to bypass the color issues, I used this:
It is a RCA>USB adapter. (costs about 30 dollars)
I then used a program called VLC to view the PAL output of the adapter and sure enough, we have color!!
I may do a video soon, but here is a screenshot of it running on my desktop.
It automatically adjusts to the video output that the wii is giving too!
Just now I burned a copy of Mario Kart(PAL) to run on my wii(NTSC). In order to bypass the color issues, I used this:
It is a RCA>USB adapter. (costs about 30 dollars)
I then used a program called VLC to view the PAL output of the adapter and sure enough, we have color!!
I may do a video soon, but here is a screenshot of it running on my desktop.
It automatically adjusts to the video output that the wii is giving too!
Metroid Prime 3 PAL on my PAL Wii takes a long while to load, but gets there. Intro music plays smoothly, video appears to be a bit choppy. Menus also appear slow. Long time load levels, but they play well.
Burnt on ridisc 8x using Cyberlink Power2go
Burnt on ridisc 8x using Cyberlink Power2go
Midnightzak said:
I had the same problem, just rename backup-creator to backup and then go to open with and browse the backup.exe from the folder and open it from there!
telefunkin said:
Oh snap, that makes a difference! Ok, burning disc shortly, thanks Telefunkin!
Rcolon85 said:
480i is standard definition on NTSC. 576i is standard for PAL
http://en.wikipedia.org/wiki/Standard-definition_television
NTSC Wii
PAL Soul Calibur Legends
imgburn set to auto speed
The game plays fine with the usual slow load times. The in-game cut scenes are fine, but the ones before the levels load are unwatchable.
But here's a new problem; when I hit home and tried to go back to the wii home page it turned off like it normal does where it shows all of the white boxes, but it never actually did. The screen flickered and went black, but nothing ever came up. The green light was still on but nothing was happening. I pressed buttons on the wiimote and nothing happened, eventually it lost sync. I hit reset on the console and nothing happened. I had to hold down the power button for a while and it finally shut off. When I turned it back on everything was fine.
Just throwing that out there to let you guys know about it. This is the same game that had the weird size problem that I mentioned earlier.
PAL Soul Calibur Legends
imgburn set to auto speed
The game plays fine with the usual slow load times. The in-game cut scenes are fine, but the ones before the levels load are unwatchable.
But here's a new problem; when I hit home and tried to go back to the wii home page it turned off like it normal does where it shows all of the white boxes, but it never actually did. The screen flickered and went black, but nothing ever came up. The green light was still on but nothing was happening. I pressed buttons on the wiimote and nothing happened, eventually it lost sync. I hit reset on the console and nothing happened. I had to hold down the power button for a while and it finally shut off. When I turned it back on everything was fine.
Just throwing that out there to let you guys know about it. This is the same game that had the weird size problem that I mentioned earlier.
Ok, still having problems with GH3 Custom disc. Green screen for a second and then the game loads up and seems to be playing just fine except the screen is flickering like its copy protected or incorrect region.
WiiFrii (PAL to NTSC-U) > Backup Creator > ImgBurn
I'm wondering if anyone knows how to get past this copy protection or incorrect region.
I have already successfully burned StarWars TFU NTSC successfully and it works fine. I'm using an NTSC Wii.
Toss out those ideas please.
WiiFrii (PAL to NTSC-U) > Backup Creator > ImgBurn
I'm wondering if anyone knows how to get past this copy protection or incorrect region.
I have already successfully burned StarWars TFU NTSC successfully and it works fine. I'm using an NTSC Wii.
Toss out those ideas please.
i came across this video today.
http://www.youtube.com/watch?v=owv95TdgDss...feature=related
and in it, he says that wanin says he IS going to continue the project.
does anyone have word on if these people know what they are talking about?
it would be such a shame for wanin to spend his time building this to trash it.
but either way, he should do what he feels is right, and not be pressured by people on the net.
http://www.youtube.com/watch?v=owv95TdgDss...feature=related
and in it, he says that wanin says he IS going to continue the project.
does anyone have word on if these people know what they are talking about?
it would be such a shame for wanin to spend his time building this to trash it.
but either way, he should do what he feels is right, and not be pressured by people on the net.
snick422 said:
yep, exact one i bought. make sure you flip the switch on it from "tv" to "hdtv" and then you will be good to go!
zigernot said:
Yea, no idea who that guy is but Waninkoko's website says nothing about continuing the Loader project...
I gotta quick question. If I use WiiFrii on a NTSC to PAL ISO will I finally be able to get color with standard AV cables?
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
-
-
-
@
BigOnYa:
I've been playing fallout4 all day, I went into a elevator and it kept going, never stopped, waited 5 minutes, must of been a bug. How bout you, whatcha do today?+1 -
-
-
-
-
-
-
@
MysticStarlight:
Ah yes, that guy lol. I still need to find all his signs. The game has a lot to do though so I don't know what to finish first -
-
@
BigOnYa:
Good times. Building is starting to get good around now for you. You making me want to make run thru again.
-
@
BigOnYa:
Ok good chatting, enjoy your gaming, and avoid the lightning, or put your sword away. Good night.
-
-
-
-
