Hello, community.
I'd like to share us my Wii VC injection tutorial for Nintendo 64 (N64) games.

If you like N64 games as Tom & Jerry: Fists of Fury, Animal Forest, Puyo Puyo SUN 64 or others for those game systems, and you want to see in action as Wii VC games, this is the tutorial for you.

-------------------------------------------------------------------------
WARNING WARNING WARNING!!!!!!!!!!!!!!!!
-------------------------------------------------------------------------
Unproperly following these instructions and/or unproperly packing the 00000000.app file CAN HARD-BRICK YOUR Wii!!!!!! DO NOT ATTEMPT TO CREATE CUSTOM Wii VC WADS unless you know what are you doing!!!!!! It's highly recommendable that you have installed in your Wii any brick protection such as BootMii as boot2, or Priiloader!

-------------------------
CAUTION:
-------------------------
N64 VC emulation is too poor on Wii, so you will have an 85% chance that your injection fails because the game does not load and crashes on the "You will need the Classic Controller" screen, and you only have an 15% chance that your injection runs fine on your Wii (often with glitches and issues).
You can see the compatibility of the N64 games that work on Wii VC in this link: https://wiki.gbatemp.net/wiki/VCInjections_Compatiblity_List#Nintendo_64

Here are the steps to inject your game!

----------------------
You can download the tools here: https://gbatemp.net/download/all-in-one-wii-vc-injecting-tools-by-saulfabreg.35917/
Uncompress the ZIP file.
-------------------


FIRST STEP - TAKING A SNAPSHOT OF YOUR GAME

1. Get your N64 ROM. Its format must be in .n64, in .z64 or in .v64. Emulate it using Project64 or other emulators.
2. Take a snapshot of your game. Use Snipping Tool to do it.
3. Click in 'New' and use the mouse to take it.
4. Save the snapshot in a folder with the name of the game.

SECOND STEP - INJECTING THE ROM

1. Get your WAD to inject. The recommended N64 WADs to inject are Sin & Punishment, Zelda: Majora's Mask, Zelda: Ocarina of Time, Super Mario 64 and Mario Kart 64, but you can test your ROM you want to inject with other N64 VC WADs such as Bomberman Hero (with romc compression), Kirby 64, Yoshi's Story, Mario Golf (romc) and others.
2. Now do the following instructions depending of the Wii VC injector you want to use:

• For Devilken's VC Injector:

1. Copy your N64 ROM in the following folders: .../Devilken_Injector/VC/ROM/
2. Copy your N64 VC WAD in the following folders: .../Devilken_Injector/VC/
3. Now open the CMD. For this, click in the address bar and write 'cmd' and press Enter.
4. Then write the following commands in the CMD: VC.exe [wad_name].wad ROM Example: VC.exe SandP64.wad ROM
5. Wait the ROM inject in the WAD.
6. When the VC.exe program shows enter the region, enter the region number and press Enter. The regions are in-screen.
7. When the VC.exe program shows enter the new game ID, enter the game ID you want to make the injected WAD and press Enter. The instructions for entering new game ID are in-screen.
8. Wait the program finish the injection. When screen appears 'Mission completed! =)', then close the CMD.
9. You get a new title.wad file. Now go to the THIRD STEP.

• For AutoInjectuWAD Injector:

1. Open the Wii VC Injecting Tools folder and select the AutoInjectuWAD folder.
2. Run 'Auto Injectuwad Injector v3.exe' as administrator
3. In 'Console Mode', select 'N64' for Nintendo 64 injection.
4. Copy the Nintendo 64 ROM and paste in the AutoInjectuWAD folder.
5. Copy the WAD you want to use for inejct and paste in the AutoInjectuWAD folder.
6. Click 'Refresh' in Pick Rom and Pick Wad.
7. Select your ROM to inject in 'Pick Rom'.
8. Select the WAD file you want to inject in 'Pick Wad'
9. In 'Custom Channel Title', enter the name of the game.
10. Press the 'Start!' button.
11. Wait the injection finish...
12. Close AutoInjectuWAD. Now go to the THIRD STEP.

THIRD STEP - EDITING THE VCPic.tpl, IconVCPic.tpl AND banner.brlyt FILES

1. Now open the CustomizeMii v3.11 folder
2. Run CustomizeMii.exe as administrator
3. In Source Wad, select the injected WAD from the 'AutoInjectuWAD' folder.
4. Click in the 'Title' tab, and delete the translations.
5. Click in the 'Options' tab, and modify the game ID.
6. Click in the 'Banner' tab, and select the 'VCPic.tpl' file.
7. Click in the 'Preview' button
8. In 'Banner', select again 'VCPic.tpl'
9. Click in 'Replace', and select 'RGBA8'
10. Select the screen capture file of your game that you maked in Snipping Tool
11. Now, in 'Icon', select 'IconVCPic.tpl'
12. Click again in 'Replace', and select 'RGBA8'
13. Select the screen capture file of your game again that you maked in Snipping Tool
14. Close the Preview window
15. Go to the 'Layout' tab
16. In 'Banner', select the 'banner.brlyt' file and extract it
17. Save in the Wii VC Injecting Tools folder
18. Now open the 'HowardC_Tools' folder
19. Open the 'VCbrlyt9.0' folder
20. Run vcbrlyt.exe as administrator
21. Click in the '...' button to localize the banner.brlyt file
22. Select the 'banner.brlyt' file that you extracted
23. Edit the banner.brlyt file as shown:

• Name: [Game Name]
• Year: [year that was released the game]
• Players: [# of allowed players], NO DASHES!!!! (Ex., write '2' for '1-2'
• Then follow the following steps:

1. Click in 'Save Changes'
2. Close the VC brlyt Editor
3. In CustomizeMii, select again the 'banner.brlyt' file and click in 'Replace'
4. Select the 'banner.brlyt' file that you edited
5. Now click in 'Create WAD'
6. If the 'You changed the brlyt file, but you didn't change the brlan file. Are you sure this is correct?' window shown, select 'Yes' or 'OK'
7. Save the WAD as '[game_name]_TEST.wad' Example: 'pilotwings64_TEST.wad'
8. Close CustomizeMii

FOURTH STEP - UNPACKING THE EDITED WAD

1. Now copy and paste the WAD in the 'WADpack_WADunpack' folder
2. Rename the WAD file as 'in.wad'
3. Use 'WAD Unpacker.bat'
4. Click in the randomed-name folder. Here's the files that joins the WAD.

FIFTH STEP - CREATING THE SAVE ICON

1. Open again the 'HowardC_Tools' folder
2. Now, in 'HowardC_Tools' folder, click in the 'VCIcon8.0' folder
3. Run VC_Icon_Gen.exe as administrator
4. In 'Console', select:

• Select 'N64' for making Nintendo 64 save icons
• Then follow the following steps:

1. In 'Source', select the screen capture photo that you made in Snipping Tool
2. In 'Dest', select the photo folder
3. In 'Create', uncheck the options 'Channel Icon' and 'Banner Image'
4. Click in 'Make Preview' to see the preview of your new save icon
5. Now click in 'Make' to make the save_banner.tpl file. This file is saved in the photo's folder.

SIXTH STEP - EDITING THE SAVE TITLE

1. Now download a hex editor compatible with Unicode to edit the save title. Download the HxD Hex Editor utility from the following link: https://mh-nexus.de/en/downloads.php?product=HxD20
   
2. Once the HxD Hex Editor is installed, open it.
3. Then click on File and then Open. Or easier, press Ctrl + O.
4. Find the WAD folder you unpacked and open the file 00000005.app that you modified the save_banner.tpl.You will get a lot of characters, but this is normal. I used a backup of the original 00000005.app before editing, but you use the 00000005.app that you are going to modify the save title.
5. Now click on Search and select the Search option. Or easier, press Ctrl + F.
   
6. 
   
   
7. In the 'Search' box, look for the original save title of the original WAD (that is, the previous name of the WAD before editing it). For example, if to inject 'Pilotwings 64' you used the WAD of 'Sin & Punishment', then look for the words 'Sin & Punishment' (WITHOUT quotes). Another example: if to inject 'Puyo Puyo SUN 64' you used the WAD of 'Super Mario 64', then look for 'Super Mario 64' (again, WITHOUT quotes).
   
8. In 'Text encoding', choose the option 'Unicode (UTF-16 little endian).
   
9. Click on 'Accept' or 'OK'.
   
10. 
    
    
11. If you wrote the name of the original save correctly, it will be highlighted:
    
12. 
    
    
13. Now click on Search and select the Replace option. Or easier, press Ctrl + R.
    
14. In the 'Search' box, retype the original save title of the original WAD (that is, the previous name of the WAD before editing it). For example, if for inject 'Pilotwings 64' you used the WAD of 'Sin & Punishment', then look for the words 'Sin & Punishment' (WITHOUT quotes). Another example: if for inject 'Puyo Puyo SUN 64' you used the WAD of 'Super Mario 64', then look for 'Super Mario 64' (again, WITHOUT quotes).
    
15. In the 'Replace with' box, type the name of the game you are going to inject (DO NOT type more than 20 characters in your save). For example, if you want to inject 'Pilotwings 64' into 'Sin & Punishment', then type the words 'Pilotwings 64' into the 'Replace with' (WITHOUT quotes) box. Another example: if you want to inject 'Puyo Puyo SUN 64' and you used the WAD of 'Super Mario 64', then put for your save title 'Puyo Puyo SUN 64' (again, WITHOUT quotes).
    
16. In 'Text encoding', choose the option 'Unicode (UTF-16 little endian).
    
17. Check the option 'Notice when replacing' so you can see that if you are editing the right place, IF YOU DON'T MAKE THIS OPTION, YOU CAN DO ANYTHING WRONG IN THIS AND WHEN TRYING IT IN YOUR Wii, IT IS VERY LIKELY FOR YOUR Wii TO HAVE A BRICK!!!!
    
18. Click on 'Accept' or 'OK'. (NOTE: Some WADs, such as Zelda: Ocarina of Time, have non-modifiable saves, so if you try to modify a save of an original Zelda Ocarina WAD, when you see it in your Wii, there are no letters. DO NOT DO IT in the case of that WAD. In others, like Sin & Punishment, you can edit them).
    
19. 
    
    
20. If this warning comes out (or any other warining for indicate you are modyfing the data), click on 'Accept' or 'OK' or 'Yes'.
    
21. 
    
    
22. Check if the original save title is highlighted before modifying it by your own save title. If so, click on 'Yes' to modify it. (It does not matter if the original save does not have a character, here the & in the 'Confirm' window does not appear, just make sure that the hex appears what you wrote, either Unicode or any other).
    
23. 
    
    
24. Once modified, you should see a text like this, with your save marked red: (DO NOT DO ANYTHING THERE)
    
25. 
    
    
26. Once you have edited your save, save the changes of 00000005.app by clicking on File and then on Save. Or easier, use Ctrl + S.
    
27. 
    
    
28. Once saved, now go to the SEVENTH STEP.

SEVENTH STEP - UNPACKING THE 00000005.app FILE

1. Now go to the 'u8tool10.1' folder and run U8Tool.exe as administrator
2. In 'Archive File', click in '...' button to localize the file
3. Select the '00000005.app' file in the
4. Now cut all the save icon files and paste in the randomed-name folder folder
5. Then click in 'Extract'
6. Minimize the U8 Tool

EIGHTH STEP - INJECTING THE SAVE ICON AND PACKING THE 00000005.app FILE

1. Now go to the following folders:

• The screen capture folder
• The '.../[randomed-name]/00000005_app_OUT/' folder
• Then follow the following steps:

1. Now copy the save_banner.tpl file from the screen capture folder and paste in the 00000005_app_OUT folder
2. Open again the minimized U8 Tool
3. In 'Archive File', click in '...' button to localize the file
4. Select the '00000005.app' file in the randomed-name folder
5. Then click in 'Pack'
6. Close the U8 Tool

NINETH STEP - PACKING THE INJECTED WAD

1. Go to the randomed-name folder
2. Copy all the files (not the folders, just
3. the files) that are:

• - The .app files
• - The .tik file
• - The .tmd file
• - The .cert file
• - The .trailer file
• - The .wte files
• Then follow the following steps:

1. Paste all the files in the 'WADpack_WADunpack' folder
2. And use 'WAD Packer.bat'
3. This make a out.wad file

TENTH STEP - USING WADder TO EDIT THE PACKED WAD

1. Go to the 'WADder_Editor' folder
2. Run wadder.exe as administrator
3. In 'WAD to Edit', click in 'Browse'
4. Select the 'out.wad' file that is in the 'WADpack_WADunpack' folder
5. Click in the 'Title' tab
6. In 'All Languages', enter the name of the game
7. Click in the 'Create WAD!' button
8. In the 'Banner' tab, select the 'VCPic.tpl' file
9. Click in 'Preview'
10. Now click in 'Replace'
11. Select the screen capture that you made in Snipping Tool
12. Click again in 'Preview'
13. Click in the 'Icon' tab
14. In the 'Icon' tab, select the 'IconVCPic.tpl' file
15. Click in 'Preview'
16. Now click in 'Replace'
17. Select the screen capture that you made in Snipping Tool
18. Click again in 'Preview'
19. Then click in 'Continue'
20. Save your WAD as [game_name].wad Example: Pilotwings64_N64.wad
21. OK! Now you injected your game as Wii Virtual Console game, ready to install and use!

INSTALLING YOUR INJECTED WAD:

Remember, you must have installed any brick protection such as BootMii as boot2, or Priiloader BEFORE INSTALLING ANY WAD!!!!!!! For install WADs, you must have the Homebrew Channel installed on your Wii and one of the following homebrew apps:

• Wii Mod Lite (released by RiiConnect24 bashed on jskyboo's WiiMod)
• Multi-Mod Manager (released by Wiiwu)
• YAWMM (Yet Another Wad Manager Mod) (released by Leathl, WiiShizzza and Cwstjdenobs)
• WAD Manager (released by Waninkoko)
• Pimp my Wii (released by Attila and distributed by wii-info.fr)

Here's some snapshots of my VC N64 iNJECT:

And here's my snapshot of my save:

Enjoy injecting your NINTENDO 64 games, and have fun!!! Enjoy!
SaulFabre

 

[MaxiBash]

Thanks, I had trouble knowing how to edit the icons, which was just 1 step away from having professional injections.

 

[SaulFabre]

Thanks, I had trouble knowing how to edit the icons, which was just 1 step away from having professional injections.

OK. In the VCIcon8.0 folder on HowardC_Tools folder, you MUST have all these files shown in this photo:

Also check the following tutorial for fix HowardC tools: https://gbatemp.net/threads/how-to-...y-other-different-non-howardc-program.543414/
Hope it help! -saulfabreg

 

[Zorg07]

Saludos amigo, tengo un problema a la hora de cambiar el nombre del save del juego, me aparece un archivo 0000005.app.bak una vez que lo modifico en la carpeta de todos mis archivos app, esta la borro y una vez que empaqueto el wad me da pantalla negra, no reproduce el juego, porfavor si pudieras ayudarme.( el juego inyectado funciona perfecto) solo quiero editar el save, espero me ayudes.

 

[Dull]

I want to know if it will work with Winback Covert Operations.

 

[SaulFabre]

Saludos amigo, tengo un problema a la hora de cambiar el nombre del save del juego, me aparece un archivo 0000005.app.bak una vez que lo modifico en la carpeta de todos mis archivos app, esta la borro y una vez que empaqueto el wad me da pantalla negra, no reproduce el juego, porfavor si pudieras ayudarme.( el juego inyectado funciona perfecto) solo quiero editar el save, espero me ayudes.

Hola @Zorg1996, ya estuve investigando y tuve el mismo error. Traté de inyectar el juego Earthworm Jim 3D en Ogre Battle 64 y editando el save y tuve un error, y no me cargó el juego. (Pero sin editar el save, me carga.) Así que hice esto: después de desempaquetar el WAD, edité el save con el editor hexadecimal (HxD) y después guardé los cambios y borré el backup (5.app.bak) y después desempaqué el 5.app editado con U8 Tool para cambiar el save_banner.tpl y luego lo empaqué y volví a empacar el WAD. Al ver mi resultado, vi que el juego sí cargó y detectó correctamente el save. Trata de hacer eso que tratabas de hacer con mi método que dije ahora. Ya después actualizaré el tutorial de N64. Saludos
PD: Si quieres seguirme preguntando en español, dirígete a mi perfil de ElOtroLado.net, me llamo saulfabreg, tienes que registrarte para que me mandes mensajes a mí en EOL en español
https://www.elotrolado.net/memberlist.php?mode=viewprofile&u=562846
EDIT: Ya he editado el tutorial

 

[Zorg07]

[QUOTE = "SaulFabre, post: 9225733, member: 479192"] Hola [USER = 496980] @ Zorg1996 [/ USER], ya estuve investigando y tuve el mismo error. Traté de inyectar el juego Earthworm Jim 3D en Ogre Battle 64 y editando el save y tuve un error, y no me cargó el juego. (Pero sin editar el save, me carga.) Así que hice esto: después de desempaquetar el WAD, edité el save con el editor hexadecimal (HxD) y después guardé los cambios y borré el backup (5.app.bak) y después desempaqué el 5.app editado con U8 Tool para cambiar el save_banner.tpl y luego lo empaqué y volví a empacar el WAD. Al ver mi resultado, vi que el juego sí cargó y detectó correctamente el save. Trata de hacer eso que tratabas de hacer con mi método que dije ahora. Ya después actualizaré el tutorial de N64. Saludos
PD: Si quieres seguirme preguntando en español, dirígete a mi perfil de ElOtroLado.net, me llamo saulfabreg, tienes que registrarte para que me mandes mensajes a mí en EOL en español
https://www.elotrolado.net/memberlist.php?mode=viewprofile&u=562846
EDITAR: Ya he editado el tutorial [/ QUOTE]
Hola amigo, pero el juego Earthworm Jim 3D no guarda juego, porque les explico lo que me paso, el juego en mi caso fue inyectado con el metodo "romc" usando Mario Party 2 como base, pero hay un detalle del juego solo se reproduce por dolphin si usas la rom "Earthworm Jim 3D (U) [!]. z64", pero no en wii real, ahora para ejecutar el juego en wii inyecta el juego pero usando una rom específica "Earthworm Jim 3D (U ) [t1] .z64 ", y el juego si lo ejecuté en una Wii nativa, solo presenta el detalle de que no guarda el juego y cuando presionas" inicio "se congela.
Con respecto a los juegos que admiten el guardado, puede solucionar ese problema. Gracias.

 

[SaulFabre]

Hello friend, but the game Earthworm Jim 3D does not save game, because I explain what happened to me, the game in my case was injected with the "romc" method using Mario Party 2 as a base, but there is a detail the game only reproduces by dolphin if you use the rom "Earthworm Jim 3D (U) [!]. z64", but not in real wii, now to run the game on wii inject the game but using a specific rom "Earthworm Jim 3D (U) [t1 ] .z64 ", and the game if I ran on native Wii, only presents the detail that does not save game and when you press" home "it freezes. You can find the roms here (https://drive.google.com/drive/fold...PSugUAwYB2eKhEWDvP3OQuDErqLuzqtTT8WpxvBSxH0oI).
With respect to games that do support saving, you can fix that problem. Thank you.

Hey @Zorg1996 could you remove the link from the message and put it in a private message with me, because it's prohibited to put links to roms in GBAtemp and you will receive a warn?

 

[Zorg07]

Hey @Zorg1996 could you remove the link from the message and put it in a private message with me, because it's prohibited to put links to roms in GBAtemp and you will receive a warn?

ok friend, sorry I didn't know about that. but I don't know how to communicate with you privately, I left you a message on facebook but you weren't connected.

 

[SaulFabre]

ok friend, sorry I didn't know about that. but I don't know how to communicate with you privately, I left you a message on facebook but you weren't connected.

Hey @Zorg1996 for questions in Spanish (español) register for free in www.elotrolado.net and you can talk to me wand write to me in my threads in Spanish (español)

 

[Zorg07]

Hey @Zorg1996 for questions in Spanish (español) register for free in www.elotrolado.net and you can talk to me wand write to me in my threads in Spanish (español)

Ok friend already leave you a message.

 

[Ciaran59]

What happens if i for example want to install the usamune practice romhack, will it conflict with the already installed sm64? Will both show up at wii menu?

 

[SaulFabre]

What happens if i for example want to install the usamune practice romhack, will it conflict with the already installed sm64? Will both show up at wii menu?

You have to change the ID of the injected WAD with ShowMiiWads or CustomizeMii. Changing the ID of the WAD will avoid conflict with another installed WAD in the Wii with the same ID (like SM64 WAD). Greetings

 

[TheN00b21]

Dumb question, would it be possible to inject a rom hack such as smash remix, I don't think it would be possible becuase it is over the size limit but was just curious.

 

[SaulFabre]

Dumb question, would it be possible to inject a rom hack such as smash remix, I don't think it would be possible becuase it is over the size limit but was just curious.

Only a few romhacks can be injected in N64 WADs, with the limit of size of 32 MB. Greater sizes than 32 MB are not supported.

 

[Exidous]

I got a little farther than the wiki with Mystical Ninja Starring Goemon.

Injected into Mario Golf (inspired by WiiU VC thread: https://gbatemp.net/threads/virtual-console-injection-caffeine-method.434510/) and got past the controller screen. I was able to navigate the ingame menus and get to the sound test (Oedo Castle is No. 6!).

Unfortunately it blackscreened when starting a game/getting past the ignore no Controller Pak query.

I had grander ambitions for this game though: my initial idea concerned the N64 Controller Pak - I've never seen details of an injection (or VC game in general that supported it). And Goemon needs it to save. But...

Cruis'n USA (and Mario Kart 64) did use the Controller Pak! The Cruis'n USA WAD seems to at least simulate Controller Pak functionality (it might have been edited to save to SRAM/like other VC instead, and they didn't change the original N64 menu). But it's still a possibility, right?

Unfortunately any injection of Goemon into Cruis'n USA failed using all three injection tools (Autov3, Devilken, and OP's). OP's failed for the z64 reason he's currently working on (https://gbatemp.net/threads/help-fi...on-on-bomberman-hero-wad.572904/#post-9392878) so I wanted to put this here as well. I suspect this is just a game size problem. Cruis'n USA was supposed to be a launch title for N64 and there's not much to it. But I have this suspicion that the WAD at least might have what we need for Controller Pak-reliant N64 games.

So finally here's my question: is there any way to edit a WAD to get around the file size problem? I suspect that it was easier to just use the bigger VC WADs rather than try to expand the small ones. But what if a small one has unique capabilities (like Controller Pak emulation)?

Alternatively, is there a small-size N64 game that uses the Controller Pak that someone wants to inject into Cruis'n USA to see if they get anything? (this is assuming I'm right that the injection failures were due to WAD size limitations).

 

[SaulFabre]

I got a little farther than the wiki with Mystical Ninja Starring Goemon.

Injected into Mario Golf (inspired by WiiU VC thread: https://gbatemp.net/threads/virtual-console-injection-caffeine-method.434510/) and got past the controller screen. I was able to navigate the ingame menus and get to the sound test (Oedo Castle is No. 6!).

Unfortunately it blackscreened when starting a game/getting past the ignore no Controller Pak query.

I had grander ambitions for this game though: my initial idea concerned the N64 Controller Pak - I've never seen details of an injection (or VC game in general that supported it). And Goemon needs it to save. But...

Cruis'n USA (and Mario Kart 64) did use the Controller Pak! The Cruis'n USA WAD seems to at least simulate Controller Pak functionality (it might have been edited to save to SRAM/like other VC instead, and they didn't change the original N64 menu). But it's still a possibility, right?

Unfortunately any injection of Goemon into Cruis'n USA failed using all three injection tools (Autov3, Devilken, and OP's). OP's failed for the z64 reason he's currently working on (https://gbatemp.net/threads/help-fi...on-on-bomberman-hero-wad.572904/#post-9392878) so I wanted to put this here as well. I suspect this is just a game size problem. Cruis'n USA was supposed to be a launch title for N64 and there's not much to it. But I have this suspicion that the WAD at least might have what we need for Controller Pak-reliant N64 games.

So finally here's my question: is there any way to edit a WAD to get around the file size problem? I suspect that it was easier to just use the bigger VC WADs rather than try to expand the small ones. But what if a small one has unique capabilities (like Controller Pak emulation)?

Alternatively, is there a small-size N64 game that uses the Controller Pak that someone wants to inject into Cruis'n USA to see if they get anything? (this is assuming I'm right that the injection failures were due to WAD size limitations).

Cruis'n USA WAD used romc compression, but that WAD is so unstable for injections. Try using different WADs of N64 VC for see if it has also issues. Greetings

 

[NormalMisha]

@SaulFabre You warned about a hardbrick if people messed up. Can't this just be done on an emunand to remain safe?

 

[SaulFabre]

@SaulFabre You warned about a hardbrick if people messed up. Can't this just be done on an emunand to remain safe?

yes, you can use a emuNAND for avoid that brick in real NAND.
But most people can't make a emuNAND, so i warn about this.
Greetings

 

[NormalMisha]

yes, you can use a emuNAND for avoid that brick in real NAND.
But most people can't make a emuNAND, so i warn about this.
Greetings

Making an EmuNAND looks easier than this! haha.