Yes.
I tried with a USB Drive and a SD Card
I tried dump it on ULGX
I tried build it with Modmii
I tried to install .wads with ShowMiiWads...
I dont know what is wrong.
Check your emunand path and emu channel path. ( from the paths option in usbl gx.
Make sure you are using the latest usb loader gx beta release ( NOT the stock 3.0 release )
Make sure you have enough space and dump your nand from usbl gx.
also beforehand make sure you usbl gx is booted with cIOS d2x beta 249.
Afterwards check if your nand is properly dumped to your previous set path.
( for better compatibilty and usage of different cIOS than d2x, place your nand udmp to the root of the device you want to dump it to.
this way it will be possible to use waninkoko cIOS rev 17/19 to solve compatibilty problems for some channels, for example games like bonsai barber.
You will need some customized cIOS for this that will install in slots 247 and 248 along side you typical slot 249 and 250 setup.
. This way you will have 4+ cIOS to choose from for booting your games and channels.
) If your nand dump is in a folder you can only use a cIOS based on d2x. If so Usbl gx will prompt you.
Before using emunand saving you should know that
NOT ALL games
are compatible.
Also make sure your games are booted with d2x cIOS ( probably in slots 249 and 250 based off off ios56 and 57.
If your signature is up to date and a representation of your Wii softmod setup, I recommend updating your cIOS configuration.
In my experience it is best to set it full emunand in the overall options, so that all games try to use it by default.
This way if you have problems for a game your can easily disable emunand saving on a per game game basis from the games setting menu.
An other method is, to first make a save on your real Wii's nand, then transfer it to your emunand using usb loader gx hdd options. ( tranfer Mii's and saves )
Some games might be able to use emunand afterwards using this method.
If all else fails, you problaby have incompatible sd cards, Hardrive.
Or you have a device not properly formatted.
You could opt to use cfg loader and or Wiiflow but these are not as user friendly I think.
For instance in usb loader GX you can set everything right from it's loader gui.
For cfg loader and Wiiflow you will need a PC to set things up.
If you really want to go all the way, take a look at uneek+DI.
I reccomend using the uneek build and emunand for this pack:
https://www.dropbox.com/sh/jcc59ml7...tracted/_Fresh_Emunand_4.3_Uneek_DI_Rev96?lst
My experience is that modmii does not builds/ setup sneek properly, resulting is black screens etc.
For you information: I use usb loader GX daily and also use uneek to have 100% channel/ game/ region compatiblty without having to swallow in settings and custom setups.
If I cannot get a channel to work from usb loader gx taking the usual steps, I revert to uneek.
With the linked emunand package you can use the same instance of the emunand for uneek and gx