Hacking USB Loader GX

[spotanjo3]

What revision is the best right now ?

 

[masterdeluxe247]

What revision is the best right now ?

The latest one probably. r929.

 

[spotanjo3]

No, I should rephrase it... Whats the best stable version right now ?

 

[jake360]

r923 to r927 are not working for me, on game selection the disc menu does not appear, the drive light is on, and nothing happen anymore.
After clicking a game on the list, I can't go back with B button either.
Other menus are working fine before clicking a game.

up to r921 it's working.
the problem is certainly starting from the 922 update, the one fixing ciosx, and converting C++ to C
(I'm using cIOS[38]v19, with FAT32+WBFS partition. Games are on WBFS, not FAT32)

Maybe I should delete the config, I'll try.
Edit : even after all the config files deleted, it's not working.

Same for me.

Wii 4.2E, cIOS[38]v18, WBFS only WD MyBook Premium.



QUOTE(cobleman @ Apr 11 2010, 12:32 PM)

Same here again wont click onto a game all it does is make clicking sounds when you push A r927
4.1e cios249 rev 19 base 38.Hermes v4 222 / 223

same here
r929 dont work for me, wont let me choose a game,
just get the clicking noise when i press the A button in the game selection screen.
4.2e cios rev19 hermes v4 222/223

 

[codiak]

My quick solution for this is to change bootios to 222 (hermes v5 for me) and it works.

 

[SenorClean]

Or turn on Quick Boot - (Settings -> Game Load -> Quick Boot (Yes))

This makes 929 work fine with 249v19 for me.

 

[cheech794]

r923 to r927 are not working for me, on game selection the disc menu does not appear, the drive light is on, and nothing happen anymore.
After clicking a game on the list, I can't go back with B button either.
Other menus are working fine before clicking a game.

up to r921 it's working.
the problem is certainly starting from the 922 update, the one fixing ciosx, and converting C++ to C
(I'm using cIOS[38]v19, with FAT32+WBFS partition. Games are on WBFS, not FAT32)

Maybe I should delete the config, I'll try.
Edit : even after all the config files deleted, it's not working.

Same for me.

Wii 4.2E, cIOS[38]v18, WBFS only WD MyBook Premium.



QUOTE(cobleman @ Apr 11 2010, 12:32 PM)

Same here again wont click onto a game all it does is make clicking sounds when you push A r927
4.1e cios249 rev 19 base 38.Hermes v4 222 / 223

same here
r929 dont work for me, wont let me choose a game,
just get the clicking noise when i press the A button in the game selection screen.
4.2e cios rev19 hermes v4 222/223

Ditto on that issue.

 

[TwoBladedKnight]

Using latest rev of priiloader and latest rev of GX, GX used to autoboot nut now I just get a black screen >.>

 

[krunz]

r923 to r927 are not working for me, on game selection the disc menu does not appear, the drive light is on, and nothing happen anymore.
After clicking a game on the list, I can't go back with B button either.
Other menus are working fine before clicking a game.

up to r921 it's working.
the problem is certainly starting from the 922 update, the one fixing ciosx, and converting C++ to C
(I'm using cIOS[38]v19, with FAT32+WBFS partition. Games are on WBFS, not FAT32)

Maybe I should delete the config, I'll try.
Edit : even after all the config files deleted, it's not working.

Same for me.

Wii 4.2E, cIOS[38]v18, WBFS only WD MyBook Premium.









cios17 hermes v5 wbfs work r 929 all ok cios18 19 no work

QUOTE(cobleman @ Apr 11 2010, 12:32 PM)

Same here again wont click onto a game all it does is make clicking sounds when you push A r927
4.1e cios249 rev 19 base 38.Hermes v4 222 / 223

same here
r929 dont work for me, wont let me choose a game,
just get the clicking noise when i press the A button in the game selection screen.
4.2e cios rev19 hermes v4 222/223

Ditto on that issue.

 

[bros]

It seems that if you turn on quick boot
(Settings -> GameLoad -> Quick Boot (Yes))

The game is loading correctly ...

I have not tested myself because I'm at work but i'll test it this late evening

 

[dun4cheap]

Banging head on wall trying to wake myself up.

I had some spare time last night to further diagnose the problems I have had since r900+. With the most recent release r929 I had hi hope so I started to do some testing.

SM4.2
No Priiloader on this machine yet.
Hermes V4 222 with 37 and 38.
Hermes v4 222 with 60
Wani's cios rev 17

Clean Seagate USB2 driive 10 gig Fat32 and 450GIG NTFS second partition

I place all the needed files on the Fat32 and use the uneo forwarder. GX Loader loads and shows me my games. Boot v4 222. When I select a game nothing, and I then GX loader become unresponsive. If I replace r929 with r899 it works flawlessly. I am using WBM 3.4 r4 and I have also tried 3.5 beta 1. I have tried changing the naming conventions to see if that was the cause.

If I try to use my 1.5TB Samsug drive, GX Loader r900+ reports no partition but lets me select and shows me my NTFS partion 1, when I select it code dumps. If I go back to r899 it works flawlessly.

Any thoughs or ideas would be great.

Thanks,

Some things I have tried:

Sd Card and Fat32 for files.
Deleted Config Files
Tried copying ISO files to wbfs folder without backup manager no difference in operation.

Is there a doc that explains the config file settings in particular the partion = ? What should it be set to?

 

[giantpune]

you cant have both
Hermes V4 222 with 37 and 38.
Hermes v4 222 with 60

 

[dun4cheap]

That was a type it is Hermes v4 223 merged with ios60

Still this has me baffled. Any ideas?

I have read where others have the same problem but they say its resolved but I have not found a difinitive solution. I have tried hermes v5 as well and wanis rev 19.

 

[q9wert]

where do i have to store ocarina codes?
if i put them in \:codes the loader cant find them.
and is there still the 256 line limit, or does it work like gecko (would need it for brawl+)


@dun4cheap: i installed 223 with ios38. what backup manager do u use?

 

[pepxl]

where do i have to store ocarina codes?
if i put them in \:codes the loader cant find them.
and is there still the 256 line limit, or does it work like gecko (would need it for brawl+)


@dun4cheap: i installed 223 with ios38. what backup manager do u use?

****.txt files go in SD:/txtcode/ or can configurable in custom paths
****.gct files are generated/go in SD:/codes/ or can configurable in custom paths

 

[OnyLpJTRQR]

Does anyone know the correct loading settings for Super Smash Bros Brawl PAL (RSBP01) on European Wii please ?

No matter what I try, it will not load, only black screen. (rev = 921)

EDIT : Just would like to add that the game is on NTFS USB HDD.

 

[q9wert]

are u using wiibackup manager? if so, u have to set "wii disc partition to keep" to "keep game partition only" in its settings. took me a whole day to find that when i had that problem

@pepxl: i put my .gct in the codes folder, but it cant find it... its the brawl+ rsbe01.gct. thats why i also need to know about the 256 line limit...

 

[cobleman]

Banging head on wall trying to wake myself up.

I had some spare time last night to further diagnose the problems I have had since r900+. With the most recent release r929 I had hi hope so I started to do some testing.

SM4.2
No Priiloader on this machine yet.
Hermes V4 222 with 37 and 38.
Hermes v4 222 with 60
Wani's cios rev 17

Clean Seagate USB2 driive 10 gig Fat32 and 450GIG NTFS second partition

I place all the needed files on the Fat32 and use the uneo forwarder. GX Loader loads and shows me my games. Boot v4 222. When I select a game nothing, and I then GX loader become unresponsive. If I replace r929 with r899 it works flawlessly. I am using WBM 3.4 r4 and I have also tried 3.5 beta 1. I have tried changing the naming conventions to see if that was the cause.

If I try to use my 1.5TB Samsug drive, GX Loader r900+ reports no partition but lets me select and shows me my NTFS partion 1, when I select it code dumps. If I go back to r899 it works flawlessly.

Any thoughs or ideas would be great.

Thanks,

Some things I have tried:

Sd Card and Fat32 for files.
Deleted Config Files
Tried copying ISO files to wbfs folder without backup manager no difference in operation.

Is there a doc that explains the config file settings in particular the partion = ? What should it be set to?

I updated to 929 couldnt do a thing deleted the config file still nothing then i reinstalled 921 set it to boot from 222 then i reinstalled 929 left the config file and it works fine now

 

[q9wert]

it finds my gct now, but the problem with the 255 lines remains. it works fine with cfg usb loader, but i like usb loader gx better and would like to use that. also, the official brawl+ site recommends gx, so it has to work somehow...

 

[pepxl]

it finds my gct now, but the problem with the 255 lines remains. it works fine with cfg usb loader, but i like usb loader gx better and would like to use that. also, the official brawl+ site recommends gx, so it has to work somehow...

im not sure GX has the new gecko engine to support Brawl+, might be wrong tho