My wii is 3.3U+HBC 1.0.1+cIOS rev9+ USB Loader GX rev713+ USB Loader GX Forwarder.
I just bought a new harddrive(IProDrive 1TB 3.5" External Hard Drive). Before that I used my 8G sandisk flash drive. It worked very well.
I partitioned my new harddirve to 2 primary partitions(first one is 750G NTFS,second one is 250G WBFS).When I used the forwarder to load, it stopped at the loading picture and the remote had no responds. But when I used HBC to load, the WBFS can be recongnized and the game can be played very well.
I realize that the forwarder is not just a link to load the app in my SD card and it will check the SD card and USB drive. After I searched some threads and read the readmii of USB loader GX, I thought the problem should be the partitions of my new drive. So I followed the guides to partition my new drive again. first one is 40G FAT32, second one is 250G wBFS, the rest is NTFS. But NO LUCKY
. The same problem, forwarder stop at the loading picture and HBC loads USB Loader GX very well.
I did one more test. When the forwarder stopped at the loading picture, I powered off the hard drive and the forwarder went to the 30s waiting picture. Then I powered on the hard drive. After the waiting time, USB loader GX was loaded and worked well.
I don't know how the forwarder initial the checking process for the USB drive. So can somebody figure it out? Thanks in advance.
When I was trying to solve the problem, I also had some questions about the forwarder:
1.When I use the forwarder and USB drive with multi-partitions, there must be a FAT32 in USB drive or not? I think if you don't want put apps to USB drive then it is not necessary to have a FAT32 partition in your hard drive. My USB flash drive only has one WBFS partition, it works well.
2.Should the FAT32 partition be the first partition in the hard drive?
I just bought a new harddrive(IProDrive 1TB 3.5" External Hard Drive). Before that I used my 8G sandisk flash drive. It worked very well.
I partitioned my new harddirve to 2 primary partitions(first one is 750G NTFS,second one is 250G WBFS).When I used the forwarder to load, it stopped at the loading picture and the remote had no responds. But when I used HBC to load, the WBFS can be recongnized and the game can be played very well.
I realize that the forwarder is not just a link to load the app in my SD card and it will check the SD card and USB drive. After I searched some threads and read the readmii of USB loader GX, I thought the problem should be the partitions of my new drive. So I followed the guides to partition my new drive again. first one is 40G FAT32, second one is 250G wBFS, the rest is NTFS. But NO LUCKY
I did one more test. When the forwarder stopped at the loading picture, I powered off the hard drive and the forwarder went to the 30s waiting picture. Then I powered on the hard drive. After the waiting time, USB loader GX was loaded and worked well.
I don't know how the forwarder initial the checking process for the USB drive. So can somebody figure it out? Thanks in advance.
When I was trying to solve the problem, I also had some questions about the forwarder:
1.When I use the forwarder and USB drive with multi-partitions, there must be a FAT32 in USB drive or not? I think if you don't want put apps to USB drive then it is not necessary to have a FAT32 partition in your hard drive. My USB flash drive only has one WBFS partition, it works well.
2.Should the FAT32 partition be the first partition in the hard drive?