ROM Hack Update for O3DS on 11.2.0.35e

[TudorBlue]

Not touched my hacked o3ds in a while but got it out as I wanted see whats what on it. I wanted to download the new Hey Pikmin demo off eshop but it says I need to update. Im not too bothered about the demo as much as I am about updating. What do i need to do to update it without bricking O3DS or losing anything? I modded it with the Tutorial which is now outdated and has been superseded by soundhax. Basically, I want to update everythng on my O3DS to the latest versions including the firmware. Any help and advice with this will be very much appreciated. Thanks in advance guys

 

[aarti]

If you installed boot9strap cfw you can update without problems

 

[TudorBlue]

If you installed boot9strap cfw you can update without problems

I went right through the tutorial but to be on the safe side, is there any way I can check?

 

[aarti]

I went right through the tutorial but to be on the safe side, is there any way I can check?

Check what?

 

[TudorBlue]

Check what?

To make double sure that boot9strap is installed

Sent from my HTC One M9 using Tapatalk

 

[aarti]

To make double sure that boot9strap is installed

Sent from my HTC One M9 using Tapatalk

Did you follow the guide of 3ds.guide?

 

[TudorBlue]

Did you follow the guide of 3ds.guide?

Yes but it was an older guide.

Sent from my HTC One M9 using Tapatalk

 

[TudorBlue]

I used browserhax

Sent from my HTC One M9 using Tapatalk

 

[TudorBlue]

Did you follow the guide of 3ds.guide?

That's what comes up when I power up whilst holding start and select

Sent from my HTC One M9 using Tapatalk

 

[aarti]

That's what comes up when I power up whilst holding start and select

Sent from my HTC One M9 using Tapatalk

Hourglass9 is only for a9lh, so use this 3ds.guide/a9lh-to-b9s. a9lh is not supported by the newer Luma versions, so you should update to b9s

 

[TudorBlue]

Hourglass9 is only for a9lh, so use this 3ds.guide/a9lh-to-b9s. a9lh is not supported by the newer Luma versions, so you should update to b9s

Wouldn't be possible to restore to Factory settings and start all over again?

Sent from my HTC One M9 using Tapatalk

 

[aarti]

Wouldn't be possible to restore to Factory settings and start all over again?

Sent from my HTC One M9 using Tapatalk

Nope, the cfw isn't deletable with restoring to factory settings

 

[TudorBlue]

Nope, the cfw isn't deletable with restoring to factory settings

There's a file missing. I've followed that tutorial to the letter. I've tried pressing "A" but the device just boots back to the system menu. Help!

Sent from my HTC One M9 using Tapatalk

 

[Lacius]

Alright, I'm just now jumping in, so I have a few questions.

First, do you already have Luma3DS installed? If you're not sure, boot the 3DS while holding the Select button. What pops up? More specifically, what version of Luma3DS are you using (should be at the top of the configuration screen).
Second, if you're installing B9S, the error depicted in the image above could be because you have the wrong boot9strap files on your SD card. What's in the boot9strap folder on your SD card?

Edit: I'm guessing you have A9LH and an old version of Luma3DS installed, based on your picture. You should be able to update to 11.5 in the system settings just fine if you're using Luma3DS. To update to B9S and the latest Luma3DS, you need to follow this guide: https://3ds.guide/a9lh-to-b9s

 

[TudorBlue]

Alright, I'm just now jumping in, so I have a few questions.

First, do you already have Luma3DS installed? If you're not sure, boot the 3DS while holding the Select button. What pops up? More specifically, what version of Luma3DS are you using (should be at the top of the configuration screen).
Second, if you're installing B9S, the error depicted in the image above could be because you have the wrong boot9strap files on your SD card. What's in the boot9strap folder on your SD card?

Edit: I'm guessing you have A9LH and an old version of Luma3DS installed, based on your picture. You should be able to update to 11.5 in the system settings just fine if you're using Luma3DS. To update to B9S and the latest Luma3DS, you need to follow this guide: https://3ds.guide/a9lh-to-b9s

I modde

Alright, I'm just now jumping in, so I have a few questions.

First, do you already have Luma3DS installed? If you're not sure, boot the 3DS while holding the Select button. What pops up? More specifically, what version of Luma3DS are you using (should be at the top of the configuration screen).
Second, if you're installing B9S, the error depicted in the image above could be because you have the wrong boot9strap files on your SD card. What's in the boot9strap folder on your SD card?

Edit: I'm guessing you have A9LH and an old version of Luma3DS installed, based on your picture. You should be able to update to 11.5 in the system settings just fine if you're using Luma3DS. To update to B9S and the latest Luma3DS, you need to follow this guide: https://3ds.guide/a9lh-to-b9s

Im trying to use this same tutorial, Ive followed it the letter. boot9strap_dev.firm and boot9strap_dev.firm.sha are in my boot9strap on my sd card. Im right at the start of section II, when I press start and power, the 3ds boots into Luma3DS chainloader menu but as you can see, there is a file missing, "Sighaxed.firm" is missing, when I press "A" it 3ds just boots into system menu. I think Im on an old version as I modded my 3ds over 12 months ago. Any help with this will be very much appreciated

 

[KunoichiZ]

I modde



Im trying to use this same tutorial, Ive followed it the letter. boot9strap_dev.firm and boot9strap_dev.firm.sha are in my boot9strap on my sd card. Im right at the start of section II, when I press start and power, the 3ds boots into Luma3DS chainloader menu but as you can see, there is a file missing, "Sighaxed.firm" is missing, when I press "A" it 3ds just boots into system menu. I think Im on an old version as I modded my 3ds over 12 months ago. Any help with this will be very much appreciated

The guide says not to use the dev versions of boot9strap and that's what you've used. Use the normal versions. You have not followed it "to the letter". Try again.

 

[TudorBlue]

The guide says not to use the dev versions of boot9strap and that's what you've used. Use the normal versions. You have not followed it "to the letter". Try again.

School boy error on my part there. Apologies, I will do everything again

 

[TudorBlue]

Alright, I'm just now jumping in, so I have a few questions.

First, do you already have Luma3DS installed? If you're not sure, boot the 3DS while holding the Select button. What pops up? More specifically, what version of Luma3DS are you using (should be at the top of the configuration screen).
Second, if you're installing B9S, the error depicted in the image above could be because you have the wrong boot9strap files on your SD card. What's in the boot9strap folder on your SD card?

Edit: I'm guessing you have A9LH and an old version of Luma3DS installed, based on your picture. You should be able to update to 11.5 in the system settings just fine if you're using Luma3DS. To update to B9S and the latest Luma3DS, you need to follow this guide: https://3ds.guide/a9lh-to-b9s

All done, can i update to the latest version now as normal?

 

[Jhynjhiruu]

All done, can i update to the latest version now as normal?

Yes

 

[TudorBlue]

All done, everything is still there although NTR fails to load/work