Hacking [Tutorial] Setting up Reinand CFW from scratch

[Arecaidian Fox]

I followed tutorial from the first post and all went absolutely fine. I can boot to emuNAND just fine. However, if run cubicninja->FBI->Install CIA I always gets error message. Running pasta (to be precise cubicninja->pasta->cubicninja->FBI->Install CIA ) works just fine. However, with pasta, packages are installed on sysNAND, which makes use of ReiNAND completely pointless.

According to https://gbatemp.net/threads/installing-cias-in-reinand.393648/, a Devmenu was supposed to be copied to emuNAND during step 3, but I tried it guide 2 times - and all installed applications disappear after "format emunand".

Any tips on how to install .cia files to emuNAND from ReiNAND?

You have to install the title manager (DevMenu, BigBlueMenu) to your sysNAND while it and your emuNAND are still linked.

 

[geragray]

You have to install the title manager (DevMenu, BigBlueMenu) to your sysNAND while it and your emuNAND are still linked.

Thanks. I just followed all steps from tutorial one more time (expect for "Step 6: Unlinking Sysnand from Emunand"). So I am assuming my sysNAND and emuNAND are still linked, right?

Once again, I did cubicninja->pasta->cubicninja->FBI->Install CIA->DevMenu. If reboot N3DS - I don't see it. If boot to Pasta - I do, and can run it. If I boot to ReiNAND - I can see it, but launching shows error "software title can not be launched". What do I do wrong?

 

[Arecaidian Fox]

Thanks. I just followed all steps from tutorial one more time (expect for "Step 6: Unlinking Sysnand from Emunand"). So I am assuming my sysNAND and emuNAND are still linked, right?

Once again, I did cubicninja->pasta->cubicninja->FBI->Install CIA->DevMenu. If reboot N3DS - I don't see it. If boot to Pasta - I do, and can run it. If I boot to ReiNAND - I can see it, but launching shows error "software title can not be launched". What do I do wrong?

Your NANDs are still linked at that point, yes. You won't be able to see your title manager on sysNAND without the Pasta patches running, so that's normal. You should be able to see and access it on your emuNAND before unlinking, though. At least that's what I remember... To be honest, I'm out of my depth on it when it comes down to the nitty-gritty technical stuff. I can't code to save my life, but I'm pretty good at following directions and eventually am able to understand how some things work by digging around.

 

[AsmodeusMac]

Big noob here. I was able to get the homebrew launcher working...installed the first posts files...but no luck. I see PastaCFW...ReiNand....and FBI. If I click on any of them my N3DS locks up. My system in 9.0.0-20U. Any ideas? I am on a mac (makes some of the cfw downloaders unable to work). I tried PastaCFW....but was not able to download the firmware (got an error). Frustrating.

 

[sHade__0]

thanks (replied to wrong thread ignore lol)

 

[JAWS_XS]

hey since this thread was bumped, I was searching to see if I could just update reinand from 2.1 to 3.0. I used this thread to install reinend 2.1 on a N3ds. (mset)

 

[sHade__0]

hey since this thread was bumped, I was searching to see if I could just update reinand from 2.1 to 3.0. I used this thread to install reinend 2.1 on a N3ds. (mset)

All you have to do is move over and replace 2.1 reinand files with 3.0 Pretty sure ;0

 

[mepica]

Hi, I've tried to boot Launcher.dat by ninjhax, but no matter how I do it always load boot.3dsx (hbc). I tried removing boot.3dsx and doesn't load anything... I don't know what to do, sure is always I didn't do but I don't know what... (obviously I'm with a N3DS 9.2)

Thanks friends.

EDIT: Solved, I was using ninjhax qr instead GW provided qr. Feel so dumb..xD

 

[Dothackjhe]

Is Ninjahax the only non-Gateway method in installing Reinand on the New 3DS XL under firmware version 9.2.0.20U?

 

[FTRBND]

Is Ninjahax the only non-Gateway method in installing Reinand on the New 3DS XL under firmware version 9.2.0.20U?

http://3dbrew.org/wiki/Homebrew_Exploits
You can use smashbroshax, ninjhax and browserhax to get homebrew. Get the starter kit from here https://smealum.github.io/ninjhax2/starter.zip
There you should use the menuhax installer to have a permanent entry point (Choose Type 2 Boot so it boots into homebrew every time).
(I recommend you use aureinand instead of reinand, if you want to then--v)
Get the aureinand files from https://github.com/AuroraWright/AuReiNand/releases .
Put the 3ds, aurei folders and the .dat file inside your sd card root and, IF you want to boot into cfw every single time instead of homebrew launcher, put the contents of the boot.3dsx in the root of your sd card too.
(If not, do the same but with the reinand files which you can get from here http://pastebin.com/m2CX4U8x you only need the reinand cfw files)

 

[Dothackjhe]

http://3dbrew.org/wiki/Homebrew_Exploits
You can use smashbroshax, ninjhax and browserhax to get homebrew. Get the starter kit from here https://smealum.github.io/ninjhax2/starter.zip
There you should use the menuhax installer to have a permanent entry point (Choose Type 2 Boot so it boots into homebrew every time).
Get the aureinand files from https://github.com/AuroraWright/AuReiNand/releases .
Put the 3ds, aurei folders and the .dat file inside your sd card root and, IF you want to boot into cfw every single time instead of homebrew launcher, put the contents of the boot.3dsx in the root of your sd card too.

Hi. Thanks for the reply. I just found the tutorial attached on this thread not even mentioning of this. Do you know of a link which gives a step-by-step method of installing Reinand to a New 3DS XL unit using the BrowserHax method I know I have access of?

 

[FTRBND]

Hi. Thanks for the reply. I just found the tutorial attached on this thread not even mentioning of this. Do you know of a link which gives a step-by-step method of installing Reinand to a New 3DS XL unit using the BrowserHax method I know I have access of?

Tried searching for the one I used for my o3ds but can't find it. You could ask in the noob questions thread, someone may have it there.

 

[Dothackjhe]

Tried searching for the one I used for my o3ds but can't find it. You could ask in the noob questions thread, someone may have it there.

Okay, thanks. I guess I will just do that.

 

[Quantumcat]

http://3dbrew.org/wiki/Homebrew_Exploits
You can use smashbroshax, ninjhax and browserhax to get homebrew. Get the starter kit from here https://smealum.github.io/ninjhax2/starter.zip
There you should use the menuhax installer to have a permanent entry point (Choose Type 2 Boot so it boots into homebrew every time).
(I recommend you use aureinand instead of reinand, if you want to then--v)
Get the aureinand files from https://github.com/AuroraWright/AuReiNand/releases .
Put the 3ds, aurei folders and the .dat file inside your sd card root and, IF you want to boot into cfw every single time instead of homebrew launcher, put the contents of the boot.3dsx in the root of your sd card too.
(If not, do the same but with the reinand files which you can get from here http://pastebin.com/m2CX4U8x you only need the reinand cfw files)

Browserhax does not work below 9.0.

 

[FTRBND]

Browserhax does not work below 9.0.

He's on 9.2, so he can use Browserhax to install menuhax.

 

[Dothackjhe]

I can re-install MenuHax as needed with my recent downgrade to 9.2.0-20U from 10.3.0-XXU. What else do I need to do to install Reinand on this unit?

 

[Quantumcat]

Is Ninjahax the only non-Gateway method in installing Reinand on the New 3DS XL under firmware version 9.2.0.20U?

He's on 9.2, so he can use Browserhax to install menuhax.

 

[Dothackjhe]

By "under," I meant "belonging to." Pardon the wrong use of word.

 

[Quantumcat]

By "under," I meant "belonging to." Pardon the wrong use of word.

Under means 9.0 or 8.1 etc but it doesn't include 9.2

But the guy managed to understand you though, so good!

 

[Dothackjhe]

I guess I just used the wrong word then.

So, back on topic, what do I need to do to install Reinand on this unit?