Homebrew WIP SysNetCheatGUI for sys-netCheat

[mleeneg]

I have atmosphere and I’m using latest firmware. What I understand is you just need place the .kip file in your SD reload atmosphere and done? Then you connect to your switch via PC?

so far this is my default settings:
{-- Custom Firmwares --}
[CFW]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
{ }

Are you using Kosmos? If Yes then all you need is to enable it in kosmos toolkit and restart(just to be sure it'll work).
If not then you might have to edit the hetake_ipl.ini to load sys-netcheat.kip with atmosphere.

{-- Custom Firmwares --}
[CFW]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
{ }

[CFW + sys-netcheat]
fss0=atmosphere/fusee-secondary.bin
kip1={folder on sdroot}/sys-netcheat.kip (to load just this kip) or kip1={folder on sdroot}/* (to load all kip in this folder)
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
{ }

From there sys-netcheat should run in the background and you can use the GUI to talk to sys-netcheat.

 

[cucholix]

so far this is my default settings:
{-- Custom Firmwares --}
[CFW]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
{ }

Are you using Kosmos? If Yes then all you need is to enable it in kosmos toolkit and restart(just to be sure it'll work).
If not then you might have to edit the hetake_ipl.ini to load sys-netcheat.kip with atmosphere.

{-- Custom Firmwares --}
[CFW]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
{ }

[CFW + sys-netcheat]
fss0=atmosphere/fusee-secondary.bin
kip1={folder on sdroot}/sys-netcheat.kip (to load just this kip) or kip1={folder on sdroot}/* (to load all kip in this folder)
kip1patch=nosigchk
atmosphere=1
logopath=bootloader/bootlogo.bmp
{ }

From there sys-netcheat should run in the background and you can use the GUI to talk to sys-netcheat.

I’m using atmosphere (nothing else, only have the atmosphere installation kips) it works if I edit settings.ini in atmosphere folder? I don’t have the hetake file you mention.

 

[mleeneg]

Seems you are just loading atmosphere with fusee.

I have tried to look up atmosphere with loading kips with no luck. All I found is loading hetake to atmosphere where hetake loads the kips with atmosphere.

 

[Sptn777]

Can anyone help me please, I use atmosphere but I won’t connect at all, debug mode it’s set to 1 and I have on modules and, atmosphere/kips modules But I won’t connect

i tray to use it with hekate but when I choose cfw+sys-net....it says wrong ini cfg or missing files failed to launch can any one upload their files just to put them on the SD