Hacking SWITCH NOOB PARADISE - Ask questions here

[ColdDarkKiller]

yeah

Post automatically merged: May 7, 2025

Done this yesterday without the Prod keys, use or search on here for - NSP Forwarder Generator

You can make it straight from your switch, which is always good.

Thanks for the reply, I found this yesterday but I want to make one for the MAME emu which that one cannot do (not yet anyway), plus I like designing my own icons on photoshop. Hopefully in the future we can add our own jpg or gif files?

 

[Blythe93]

Hello

Post automatically merged: May 7, 2025

I have a problem playing the hundred line. I keep getting a 2123 error,

Blank prodinfo?

 

[iiPink0reo]

My tinfoil game only has dlc how would i get the base game

 

[Tunka]

My tinfoil game only has dlc how would i get the base game

which game

 

[ColdDarkKiller]

which game

The shop isn't working how it did before, it says that on load up screen, will be returning to normal again in the future (apparently?) You will have to find you games someone else in the time being I'm afraid. Hope this helps @iiPink0reo

 

[THYPLEX]

I have a modchipped switch V2 , can i dump a game that i've legally bought on the eshop and his save to install It to the emunand without getting banned ?

 

[ColdDarkKiller]

I have a modchipped switch V2 , can i dump a game that i've legally bought on the eshop and his save to install It to the emunand without getting banned ?

I'd say in theory yes because you own it & paid for it legally.... but most company's (nintendo/sony/steam) will say no even though you paid for it they can do what ever they like with it, & will probably frown apon you making a backup & if they did by chance flag it up & ban you, im sure Nintendo would not lift the ban & say you have modded your system which breaches the terms & conditions & it would be your fault!

 

[nmagod]

they sure would, while continuing to ignore most joycon drift causes and reports lmao

so I'm back with a question I guess: can I safely use daybreak to update my sysCFW to 19.0.0

 

[THYPLEX]

I'd say in theory yes because you own it & paid for it legally.... but most company's (nintendo/sony/steam) will say no even though you paid for it they can do what ever they like with it, & will probably frown apon you making a backup & if they did by chance flag it up & ban you, im sure Nintendo would not lift the ban & say you have modded your system which breaches the terms & conditions & it would be your fault!

Damn that sucks , should've bought Dragon Quest 11s physical version instead...

 

[b17bomber]

Nevermind

 

[Tunka]

Blank prodinfo?

what is blank prodinfo.

 

[Blythe93]

what is blank prodinfo.

Blank prodinfo = you use either Exosphere, Incognito_RCM or similar to remove your console's serial number. If you go to the system settings to see the serial numbers and if your serial number consists most of zeros, your prodinfo is blank and could be the cause of the crash, Otherwise, something else is the cause of the crash.

 

[Misterfan2000]

Hello there, I'm having some problems with the last Atmosphere update:

I updated my Switch to 20.0.1 and Atmosphere to 1.9.0
When I open a game (Physical or digital) it says to me "Unable to start software" and when I click "Show all software" Atmosphere crashes with error code 2162-0002 (0x4a2) from the program 0100000000001000, BUT I don't have that folder on my SD Card

Any fix for that, please?

 

[Blythe93]

Hello there, I'm having some problems with the last Atmosphere update:

I updated my Switch to 20.0.1 and Atmosphere to 1.9.0
When I open a game (Physical or digital) it says to me "Unable to start software" and when I click "Show all software" Atmosphere crashes with error code 2162-0002 (0x4a2) from the program 0100000000001000, BUT I don't have that folder on my SD Card

Any fix for that, please?

Did you update sys-patch [1][2] as well?
Also, Qlaunch's ProgramID is 0100000000001000 so I wonder if it the issue is something related to the custom theme?

 

[Misterfan2000]

Did you update sys-patch [1][2] as well?
Also, Qlaunch's ProgramID is 0100000000001000 so I wonder if it the issue is something related to the custom themes?

Yes, I have the last sys-patch but apparently it does nothing (What patches I should enable to properly work?)
About the ProgramID, as I said I deleted that folder and I didn't have any custom theme installed
I also forgot to say that I'm using sysMMD

 

[admiralcrustacian]

hello,
All WAS working fine, then the power ran out by accident, tried to start it up again with Fusee but now encountering this issue.
getting the errror below after sending Fusee payload:
"A fatal error occurred when running Fusee. Unable to identify package1! "

Running:
Firmware 19.0.1
Atmosphere-1.8.0-prerelease-c6014b533 (release Oct 16,2024)
Fusee (release Oct 16,2024)
Sys-Patch Sysmodule 1.5.5

any help appreciated, thanks!

 

[Blythe93]

What patches I should enable to properly work?

I have only the stuff that's enabled by default. Try removing the sys-patch folder or something like that from the config folder on your SD card and reboot.
Once it reboots, open up the Tesla menu and select sys-patch and make sure that patching is enabled on sysMMC as well (it should be by default, anyway, but it doesn't hurt to check). Also, check under logs to see if everything is Patched (green or orange, it doesn't really matter).

The only other thing that comes to my mind is blocking the Nintendo servers with 90DNS or DNS MITM just in case that game tries to access the Internet (haven't played it so I don't really know much).

hello,
All WAS working fine, then the power ran out by accident, tried to start it up again with Fusee but now encountering this issue.
getting the errror below after sending Fusee payload:
"A fatal error occurred when running Fusee. Unable to identify package1! "

Running:
Firmware 19.0.1
Atmosphere-1.8.0-prerelease-c6014b533 (release Oct 16,2024)
Fusee (release Oct 16,2024)
Sys-Patch Sysmodule 1.5.5

any help appreciated, thanks!

I'd backup the atmosphere and bootloader folder, delete them from the SD card and replace them with the fresh files from Atmosphere's and Hekate's respective repositories. You can use the latest versions just fine as they are backwards compatible. Also, make sure to update your sys-patch [1][2] as well. Don't forget to update your fusee.bin payload as well. Hopefully, it'll boot once you do that. Nothing else I can suggest you to do, anyway.

 

[Misterfan2000]

I have only the stuff that's enabled by default. Try removing the sys-patch folder or something like that from the config folder on your SD card and reboot.
Once it reboots, open up the Tesla menu and select sys-patch and make sure that patching is enabled on sysMMC as well (it should be by default, anyway, but it doesn't hurt to check). Also, check under logs to see if everything is Patched (green or orange, it doesn't really matter).

The only other thing that comes to my mind is blocking the Nintendo servers with 90DNS or DNS MITM just in case that game tries to access the Internet (haven't played it so I don't really know much).


I'd backup the atmosphere and bootloader folder, delete them from the SD card and replace them with the fresh files from Atmosphere's and Hekate's respective repositories. You can use the latest versions just fine as they are backwards compatible. Also, make sure to update your sys-patch [1][2] as well. Don't forget to update your fusee.bin payload as well. Hopefully, it'll boot once you do that. Nothing else I can suggest you to do, anyway.

Ok, I finally fixed it

It was sys-tweak who created those errors, but now I want to know: How I can update sys-tweak for 20.0.1?

 

[Blythe93]

It was sys-tweak who created those errors, but now I want to know: How I can update sys-tweak for 20.0.1?

You should probably ask at the same place you downloaded it from, can't really help much about that. Glad that you fixed the issue!

 

[satoruyan]

Tried posting this on the SwitchPirates/SwitchHacks subreddits but got filtered. I'll post what I said verbatim:


"I corrupted my emummc by removing the SD card at the wrong time, now all my titles are gone:

A few weeks ago, I accidentally removed my SD card while my Switch was on, which led me to getting a bunch of errors like "failed to mount SD card!" "unknown pkg1 version hos version not supported or emummc corrupt failed to launch HOS"

I followed a guide, copy-pasted my SD card's files to my PC (because I thought my games and saves were on my SD card alone) reformatted the SD card to ex-FAT (it's 256 GB), made a new EmuMMC partition, then drag-and-dropped my old SD Card's files from my PC back on to the SD card.

I had a few more errors, but then I used the "fix emummc" button on Hekate to resolve them. But the problem is, all my games are gone except for 4 titles that show up on my stock OS including Tinfoil.

I think I made a critical mistake by just copy-pasting my SD Card. I thought my games and saves were on the SD card itself, not just the EmuMMC.

Is there any way I can get my titles back, or at least their saves? I play a lot of RPGs and I'd rather not try and redo dozens of hours of gameplay from tutorial again.

I do have a years-old NAND(?) (it might be emuMMC) backup I made using NXNANDManager somewhere on my PC, but idk how many of my played games exist on it. My SD card still has 209 GB of data on it, so I hope I can salvage something.

Any help would be appreciated."

update:
it seems that I might have a file-based emummc? if I click on the backup's Nintendo folder, it has an ER00 folder that's 192GB and has all my screenshots.

the new emummc I made is stored in RAW1, is there a way to somehow make those files accessible?