Hacking SWITCH NOOB PARADISE - Ask questions here

[kyrusdemnati]

on nintendo switch

quick few questions

CHEAT

how do i enable/disable cheats when starting games? ( i have tinfoil and downloaded cheat saved)

is there a mod which lets you disable/enable


SAVE FILES

agian tinfoil lets you download saves file for games, is there a way to disable/enable?
i also have JKSV mod installed...

is there a database online where i can download full game save files?


PS5

Is it possible to play PS5 REMOTELY on switch as a homebrew rather then INSTALLING android? or is it not worth it if it runs badly?


SYS-CALC

Any reccomended safe settings which i can apply to the whole system for every game?
does it save it per game file automatically if i adjust settings?

 

[rsx]

Normally I work on previous gen consoles but got ahold of a switch lite. I fried the 3.3v resistor, came off as soon as i touched it. Is there a fix or is the console done for?
Also, if it's not done for, can somebody post a direct wire guide? I dont want to use the ribbon cable.

 

[kyrusdemnati]

mission control homebrew question.
thinking of selling my pro controllers and using a ps5 controller - is it worth it?
(dont really use pro controllers to be fair or often, but maybe ps5 controllers will have a longer shelf life for me, as i have a ps5 too)

never tried this does this work with ps5 controllers? in docked mode does it need sycning each time or it is a good replacement / like for like for pro controllers - will switch turn on with other controllers etc i dont care for amiibo but does everything else work?

 

[Blythe93]

mission control homebrew question.
thinking of selling my pro controllers and using a ps5 controller - is it worth it?
(dont really use pro controllers to be fair or often, but maybe ps5 controllers will have a longer shelf life for me, as i have a ps5 too)

never tried this does this work with ps5 controllers? in docked mode does it need sycning each time or it is a good replacement / like for like for pro controllers - will switch turn on with other controllers etc i dont care for amiibo but does everything else work?

If you use PS5 controller on your Switch, one of the limitations is that you won't be able to wake up your console from sleep by using it, as far as I know of. I'm not familiar with all the features PS5 controller has, but you probably won't be able to use all of them - buttons, motion controls and basic rumble should be pretty much it.

 

[kyrusdemnati]

If you use PS5 controller on your Switch, one of the limitations is that you won't be able to wake up your console from sleep by using it, as far as I know of. I'm not familiar with all the features PS5 controller has, but you probably won't be able to use all of them - buttons, motion controls and basic rumble should be pretty much it.

Crap I think this could be an issue now

Post automatically merged: Jun 5, 2024

st installed Mission Control paired dual sense 5 had a brief play of Mario kart powered it off / sleep mode and now it won't turn on

In both docked or undocked mode

Prior to this I did also max out all settings in system-cal mod, but now it not turning on
Just a black screen

Please Advise

Post automatically merged: Jun 5, 2024

If you use PS5 controller on your Switch, one of the limitations is that you won't be able to wake up your console from sleep by using it, as far as I know of. I'm not familiar with all the features PS5 controller has, but you probably won't be able to use all of them - buttons, motion controls and basic rumble should be pretty much it.

It's not turning back on

 

[Draxzelex]

If i update atmosphere and everything using USB Mass storage within Hekate is it fine if i delete the atmosphere and bootloader like in tutorial for clean install or i need to replace it ?

Kinda afraid i don't know if i have some kind of sys file that gonna make everything mess up because i found out my switch lite have mission control and i don't know if there is other in it

This is actually how I update Atmosphere. Removes the risk of breaking the SD card connector inside the console while ensuring everything is properly updated.

 

[Blythe93]

st installed Mission Control paired dual sense 5 had a brief play of Mario kart powered it off / sleep mode and now it won't turn on

In both docked or undocked mode

That's really weird.

Prior to this I did also max out all settings in system-cal mod, but now it not turning on

I'm not sure what system-cal mod is, first time hearing about it.

So you're unable to wake up / power on your console by pressing the power button? Tried resetting the console by holding the power button for around 20 or more seconds? If not, try that and see if it boots into the OFW. If it does, restart and boot into RCM and launch your CFW, see if it's working again, remove the files on your SD card that are possibly causing the crash / freeze (that system-cal mod you've mentioned). If it doesn't boot into OFW, make sure that the battery isn't low. Once the battery's drained, it can take a while for the Switch to charge in the beginning, but it should be pretty steady after a while.

 

[iamreallysalad]

This is actually how I update Atmosphere. Removes the risk of breaking the SD card connector inside the console while ensuring everything is properly updated.

Did you delete your atmosphere folder and bootloader folder when updating using hekate usb mass storage?

 

[Draxzelex]

Did you delete your atmosphere folder and bootloader folder when updating using hekate usb mass storage?

I do, er, well I used to. If you have any mods or cheats then you shouldn't be deleting the entire atmosphere folder when updating. For example, I have the mods installed that bypass the need for a Jackbox account. Those mods are contained inside the contents folder so I try to delete every other folder. The bootloader folder does not need to be deleted as Hekate is designed for the bootloader folder to be updated via drag and drop. It even says so on Hekate's GitHub page.

 

[iamreallysalad]

I do, er, well I used to. If you have any mods or cheats then you shouldn't be deleting the entire atmosphere folder when updating. For example, I have the mods installed that bypass the need for a Jackbox account. Those mods are contained inside the contents folder so I try to delete every other folder. The bootloader folder does not need to be deleted as Hekate is designed for the bootloader folder to be updated via drag and drop. It even says so on Hekate's GitHub page.

Mods i have is only breath of the wild but i can back up that, so i don't need to delete bootloader and just drag and drop ? For atmosphere it's fine if i delete it after backup all my mods ?


Btw I'm updating by using HATS and in tutorial it's said i need to delete bootloader too for it

 

[rsx]

Is there an app I can use to make sure the dlc/updates are installed?

 

[BigOnYa]

Is there an app I can use to make sure the dlc/updates are installed?

Yes, DBi, and install them, just like the actual game.

 

[kiyafox]

hello i need some help, im trying to find 3 things and am struggleing.

thing 1: charger for nintendo switch that is longer than the normal charger but dosnt have issues that some non nintendo brands seem to have

thing 2: usb c payload injector. i had one before but it died and i found out it was not legit and ma struggling to find a legit one

thing 3 aka cat in the hat: a car charger that is decent


and yes i intentionally made the pun

 

[Gorkensnorkel]

Ahoy, its been a long time since I set up a memory card so maybe someone can toss me a bone. I have an OLED switch chipped, what and where is the best guide these days for dumping the nand, setting up an emunand, etc?

 

[Blythe93]

thing 1: charger for nintendo switch that is longer than the normal charger but dosnt have issues that some non nintendo brands seem to have

Maybe you can use an extender cable with the official one? That's how I'd do it as I usually prefer the official chargers for my consoles.

thing 2: usb c payload injector. i had one before but it died and i found out it was not legit and ma struggling to find a legit one

Legit ones are probably overpriced now, provided you can find any available for sale.

I'd suggest that, if you have an Android phone, you can send payloads via Rekado once you connect your phone with the Switch. Even the RCM Loader clones can send Hekate's payloads which will look for update.bin on your SD card and, if found and is newer, update.bin will be launched instead, therefore you don't need to update the payload on your injector.

if you don't want to use your phone or PC to send payloads (i.e. you want a dedicated RCM loader device), you can also make yourself a DIY RCM loader by using a supoorted Raspberry Pi model and running the Fusée à la Alpestre on it. I've personally used Raspberry Pi Zero 2 W and it works well. Along with it and its case, I've purchased a USB micro B to type C cable and a RPi charger with the power switch. I've paid around $40 in total so it's not really the cheapest solution, nor it's portable enough. I'll probably add a battery to it to make it portable once I find a suitable one.

thing 3 aka cat in the hat: a car charger that is decent

Sadly, I can't recommend any specifically.

Ahoy, its been a long time since I set up a memory card so maybe someone can toss me a bone. I have an OLED switch chipped, what and where is the best guide these days for dumping the nand, setting up an emunand, etc?

I'd suggest checking Rentry.org guide.

 

[Gorkensnorkel]

I see HATS is taken down. Is there another location its hosted? Or an alternative for a CFW pack/download?

Edit: Should I update to 18.0 or 17.1?

 

[Dust2dust]

I'd suggest that, if you have an Android phone, you can send payloads via Rekado once you connect your phone with the Switch. Even the RCM Loader clones can send Hekate's payloads which will look for update.bin on your SD card and, if found and is newer, update.bin will be launched instead, therefore you don't need to update the payload on your injector.

if you don't want to use your phone or PC to send payloads (i.e. you want a dedicated RCM loader device), you can also make yourself a DIY RCM loader by using a supoorted Raspberry Pi model and running the Fusée à la Alpestre on it. I've personally used Raspberry Pi Zero 2 W and it works well. Along with it and its case, I've purchased a USB micro B to type C cable and a RPi charger with the power switch. I've paid around $40 in total so it's not really the cheapest solution, nor it's portable enough. I'll probably add a battery to it to make it portable once I find a suitable one.

Wow, I didn't know Fusée à la Framboise got updated! It's an interesting concept. Fusée à la Framboise worked well when I tried it several years ago in the early days of the fusée exploit. On the other hand, it's probably a bit of overkill to use a Raspberry Pi just as a RCM payload pusher. I think the best option for those without a dedicated RCM Loader dongle is to use Rekado, if it's compatible with one's phone. In any case, plenty of options to push a payload. I wish Nintendo wouldn't have issued a C&D against Dragon Injector several years ago. That was the absolute best device, fitting in the cartridge slot. Wish I had bought one back then.

 

[Blythe93]

I wish Nintendo wouldn't have issued a C&D against Dragon Injector several years ago. That was the absolute best device, fitting in the cartridge slot. Wish I had bought one back then.

Same here. I wish I got into the Switch hacking scene sooner, I missed on buying a bunch of fancy gadgets.

Should I update to 18.0 or 17.1?

I'm currently on 18.0.0 and everything's working fine as far as I can tell.

 

[Draxzelex]

Mods i have is only breath of the wild but i can back up that, so i don't need to delete bootloader and just drag and drop ? For atmosphere it's fine if i delete it after backup all my mods ?


Btw I'm updating by using HATS and in tutorial it's said i need to delete bootloader too for it

Correct, the bootloader folder doesn't need to be deleted; its designed to be updated by simply placing the latest bootloader folder onto the SD card. Backing up your mods is fine as well.

I do NOT recommend using HATS. Its a bloated package that doesn't teach users at all how to update their files and loads them up with useless programs. The fact that they specifically tell you to not delete the bootloader folder when the creator of Hekate themselves encourage users to do so speaks volumes of the atrocity of HATS. In case you don't believe me, if you go to the releases page on the Hekate GitHub page and scroll down to how to update, it clearly states that there is absolutely no need to delete the old bootloader folder first.

 

[Gorkensnorkel]

Correct, the bootloader folder doesn't need to be deleted; its designed to be updated by simply placing the latest bootloader folder onto the SD card. Backing up your mods is fine as well.

I do NOT recommend using HATS. Its a bloated package that doesn't teach users at all how to update their files and loads them up with useless programs. The fact that they specifically tell you to not delete the bootloader folder when the creator of Hekate themselves encourage users to do so speaks volumes of the atrocity of HATS. In case you don't believe me, if you go to the releases page on the Hekate GitHub page and scroll down to how to update, it clearly states that there is absolutely no need to delete the old bootloader folder first.

If you don't recommend preset packages of mods then where can we check for different CFW apps? Is there a guide somewhere that gives recommendations for different setups? Like right now I am trying to update my OLED that uses HWFLY.