Strange UART behavior on PS5 EDM-010 80800024

  • Thread starter Thread starter asdrubale
  • Start date Start date
  • Views Views 637
  • Replies Replies 1

asdrubale

Well-Known Member
Newcomer
Joined
Jul 19, 2025
Messages
56
Reaction score
12
Trophies
0
Age
37
XP
189
Country
Italy
Hi everyone,
I’m having an issue with a PS5 EDM-010. It powers on and shows BLOD for 2 seconds. On UART I get the following error: 80800024. Under the microscope I don’t see any cracks on the die, and the PCB doesn’t appear to be bent on any side.


The very strange thing is that as soon as I connect the PS5 to mains power, it turns on by itself without pressing any button, then I get BLOD for 2 seconds. On the next button press, nothing happens; after waiting about 30 seconds, it shows BLOD for 2 seconds again.


When I connect a bench power supply, I get the correct power-up sequence (07MHA 308), but then something odd happens: for about 2 seconds it powers on by itself without pressing any button, enables all voltages across the APU (including the APU rails), and then shuts down.


What would you recommend I do next? The spontaneous power-on without pressing any button is very strange — could this be a BIOS issue?
In any case, I have replacement parts for the entire board, so any information or suggestions are very welcome.
 
Herkese merhaba,
PS5 EDM-010 ile ilgili bir sorun yaşıyorum. Cihaz açılıyor ve 2 saniye boyunca BLOD hatası gösteriyor. UART üzerinden şu hatayı alıyorum: 80800024. Mikroskop altında çipte herhangi bir çatlak göremiyorum ve PCB'nin hiçbir tarafında bükülme yok gibi görünüyor.


Çok garip olan şu ki, PS5'i prize takar takmaz, hiçbir tuşa basmadan kendiliğinden açılıyor, ardından 2 saniye boyunca BLOD hatası alıyorum. Sonraki tuşa basışımda hiçbir şey olmuyor; yaklaşık 30 saniye bekledikten sonra tekrar 2 saniye boyunca BLOD hatası veriyor.


Bir test güç kaynağı bağladığımda, doğru açılış sırasını (07MHA 308) alıyorum, ancak daha sonra garip bir şey oluyor: yaklaşık 2 saniye boyunca herhangi bir düğmeye basmadan kendi kendine açılıyor, APU üzerindeki tüm voltajları (APU hatları dahil) etkinleştiriyor ve ardından kapanıyor.


Bundan sonra ne yapmamı önerirsiniz? Hiçbir düğmeye basmadan kendiliğinden açılması çok garip; bu bir BIOS sorunu olabilir mi?
Her durumda, anakartın tamamı için yedek parçalarım mevcut, bu nedenle her türlü bilgi veya öneriye açığım.
Merhaba aynı sorunu yaşıyorum çözüm bulabildinizmi
 

Site & Scene News

Popular threads in this forum