Hacking SNEEK+DI quick guide

[obcd]

I have it enabled in the DI menu. I was using GeckoReader

After installing the proper drivers, My Gecko showed up as a serial port.
I simply use Putty to look at the debug output and save it to a file.
The usb interface chip hasn't changed between the Rev.1 and Rev.2 Gecko's.
If other programs show you debug output (Like the priiloader), the sneek modules should show some as well.
You need to add -v to the ioskpatch line in the build_boot2 to enable sneek debug output.

It's best to delete the diconfig.bin and channelcache.bin in your sneek folder before you run uneek + di.

You need at least 1 game in discex format on your games folder.

When exactly is it crashing? Only when you are trying to launch a game in the disk channel? Do you have access to the Di menu?

Have you already tried to launch a game with the JoyFlow Loader?

Have you tried the rev. 150 binaries that you can download from the google sneek project?

 

[RandomUser]

You need to add -v to the ioskpatch line in the build_boot2 to enable sneek debug output.
Ah, that is why I could not get the debug output. Also I did not realized Putty could be used to get debug information from a USBGecko.
This I will have to remember to do the next time I need a debug output. Thanks.

QUOTE(obcd @ May 9 2011, 04:27 AM) When exactly is it crashing? Only when you are trying to launch a game in the disk channel? Do you have access to the Di menu?

Have you already tried to launch a game with the JoyFlow Loader?

Have you tried the rev. 150 binaries that you can download from the google sneek project?

It would crash after I select "Start" on any channel, the Wii would fade to black and stays there. Essently the Wii crashed at black screen.

No, I have not

and no.

I have tried revision 154 and it works like a charm, so I am happy

.
Apparently there was a problem with IOSKPatch or something on revision 150 -153.
Thanks for your help.

 

[zizer]

r154 Changes

IOSKPatch:
-Removed a patch which breaks SNEEK/UNEEK on newer Wiis

DI:
-Changed the code back to only reset on port which caused a freeze

ES:
-Disabled the cheat menu be default

FS-USB:
-Changed the code back to only reset on port which caused a freeze

 

[BryceOne]

Is anyone able to get LEGO Pirates to run on Uneek+DI?? It doesn't show up when I use "1" on WiiMenu. It does show up using JoyFlow, but gives a DVD Error when I tried to run it.

 

[zizer]

LEGO_Pirates_of_the_Caribbean_The_Game_PAL_WII-iCON work with uneek+di r154 pal 4.3

 

[BryceOne]

LEGO_Pirates_of_the_Caribbean_The_Game_PAL_WII-iCON work with uneek+di r154 pal 4.3

Well, I have the USA version, and I'm still on r150.

 

[OverjoY]

LEGO_Pirates_of_the_Caribbean_The_Game_PAL_WII-iCON work with uneek+di r154 pal 4.3

Well, I have the USA version, and I'm still on r150.

What map name do you use for this game?

 

[BryceOne]

LEGO_Pirates_of_the_Caribbean_The_Game_PAL_WII-iCON work with uneek+di r154 pal 4.3

Well, I have the USA version, and I'm still on r150.

What map name do you use for this game?

Not sure what you mean by "map name".. I used DiscEx, with the default folder name "SCJE4Q". Anyways, it works fine on r154, both using "1" and on JoyFlow now.

 

[wii knee]

Please,

Have Uneek +DI.
I want to migrate my Wii backup discs (DVDs) to usb. Do I have to uninstall the DI module to regain access to the Wii's drive? Can this be done and if so, how?
(Note: I know to use DiscEx or ModMii to move b/u games from WBFS to Fat32)

Pls and thx!


EDIT: Solution I'm working with, now ports 1 DVD at a time - Use ImgBurn to rip DVD-r back to PC. Use DiscEx on ripped ISO. Copy to usb (games folder).

 

[zizer]

http://code.google.com/p/sneek/issues/detail?id=77

 

[Bitbyte]

I've been using UNEEK+DI for ages and everything has always worked just fine. Got a classic controller pro yesterday, so I wanted to put some VC on the NAND and I read that I could use JoyFlow to load VC/WW that's not visible from the default 48 channels. It didn't boot so I downloaded crediar's GUi to create the files for the r150 revision. Got rid of the old uneek+di files and put the new ones on the SD/USB and everything boots fine but as soon as I try to launch something, be it a VC game or even the HBC, I just get a black screen. Any idea what might be causing this?

Also, are r150 of UNEEK+DI and JoyFlow incompatible with SM 4.2U? Maybe that's the prob. I created a virgin 4.3U nand with ModMii so hopefully that'll work. Is S/UNEEK still the most compatible way to play games off of a USB HDD and is JoyFlow the best way to play all VC and WW? Haven't been up-to-date on this stuff for quite a while now

 

[OverjoY]

1. Did you change the region in the DI-menu to USA? It's on EUR by default.
2. Yes with JoYflow you can play any WW or VC title even if you've more then 47 installed
3. Every rev of UNEEK and JoYflow work with SM 4.2u
4. If JoYflow is the best way to play WW and VC games is personal, but for me UNEEK is the best way and JoYflow is a good way to launch them

 

[Bitbyte]

Hmm nope, don't think so. Would that have any effect on not being able to launch the HBC though?

Yeah, UNEEK is the best way for me too, the only thing I didn't like about it was how it was limited in the amount of channels you can have but JoYflow seems to solve that problem

 

[OverjoY]

If you've only changed the UNEEK files and the emu nand you use worked with the previous rev of UNEEK there isn't much more I can think of what's wrong. Did you also remove the game and channel cache files (diconfig.bin and channelcache.bin)?

 

[Bitbyte]

Don't think I even had those on the previous build lol. But yeah, removed all the dirs and reinstalled a couple times. Made a clean nand with ModMii, booted fine and set it up but I can't even access the DI menu to change the region :/. Also, I'm having this extremely weird bug.. If I boot the Wii, UNEEK loads fine and shows all the channels. However, as soon as I try to boot something (anything) it gives me a black screen. After that I hold the power button down to do a hard shutdown but the really weird thing is that on the next boot, it doesn't boot the system menu but it loads the app that it previously gave me a black screen on

 

[OverjoY]

To bad you trashed your working emu nand. Normaly just updating the UNEEK files is enough

 

[SanGor]

r150 is broken try a different rev

 

[Bitbyte]

Ok cool

. I still have a couple backups OverjoY, no worries

*edit: Thanks SanGor, everything's working fine again

 

[zizer]

r150 is broken try a different rev

broken? r150 is stable version

 

[XFlak]

I'm too lazy to go digging, can anyone confirm that priiloader v0.7 and hacks_hash.ini works on s\uneek?