ROM Hack ShiverBot - Splatoon 3 memory editor using sys-botbase

Taishiro

Well-Known Member
OP
Member
Joined
Apr 22, 2020
Messages
322
Trophies
0
Age
23
XP
854
Country
Chile
First of all, thank you for the reply and the work you're doing
Umm, ok...let's start by saying that I got an error while trying to extract the files from the rar. Usure if it was my pc freshly "upgraded" to w11, I quickly switched to my mac for a quick download and copy.
Once done that, I launched ShiverBot and i got View attachment 333203View attachment 333204these 2 errors 2 times before Shiverbot actually launched.

So I turned on S3, went into the lobby and tried to connect to shiverbot and got this error:
View attachment 333206
The small italian line roughly transates to "unable to establish connection. persistent rejection of the target computer"
This is 100% coming from sys-botbase. I’d advise you to delete atmosphere/contents and then extract the latest sys-botbase zip.

Also, the program does not run on Mac. Because it’s made in .NET6, it’s strictly windows-only o~o
 

FantasyM

Member
Newcomer
Joined
Jun 17, 2020
Messages
14
Trophies
0
Age
27
XP
120
Country
Italy
This is 100% coming from sys-botbase. I’d advise you to delete atmosphere/contents and then extract the latest sys-botbase zip.

Also, the program does not run on Mac. Because it’s made in .NET6, it’s strictly windows-only o~o
Yea, sorry, it was 2am and I was dead tired so I probably explained myself badly
I only downloaded and extracted it on mac, since on win11, winrar gives me error while trying to extract the rar.
Before writing this message, i did a bunch of testing: i downloaded the files again and between shiverbot, sysbot and the atmosphere, shiverbot is the only rar that gives me error while extracting. As you suggested, I also deleted the atmosphere/content folder and made sure only the folder 430..0B was in there.
Launched S3, went into the lobby, tried to connect to shiverbot, got the same error (10061)
Now I got another weird question: I think I read about a "vanilla" atmosphere....can it be because I'm using the deepsea package?
 

Zadrave

Active Member
Newcomer
Joined
Mar 28, 2016
Messages
37
Trophies
0
Age
29
XP
230
Country
United States
I cannot get the printer to work correctly for the life of me, it is either too fast and paints everything black or is off center for some reason. Any tips?
 

ezkitty

Well-Known Member
Member
Joined
Jul 28, 2021
Messages
168
Trophies
0
Age
26
XP
892
Country
United States
I cannot get the printer to work correctly for the life of me, it is either too fast and paints everything black or is off center for some reason. Any tips?
I've connected my switch and PC to my android's hotspot with an ethernet cable connected as well to give me the best connection for both devices. it was my first time using it so i set the ms at 80. it printed the entire image 100%, yeah it took long but i didnt care. i had other stuff to do. was happy to come back to a finished art
 

junglebeats

New Member
Newbie
Joined
Oct 17, 2022
Messages
1
Trophies
0
Age
19
XP
14
Country
United States
What is error: address peeking returned an invalid amount of money. please delete all AMS cheat files, restart the game and try again
 

PANMOCHI

Member
Newcomer
Joined
Oct 24, 2022
Messages
8
Trophies
0
Age
17
XP
34
Country
Japan
Hello. Suddenly, I am Japanese. I was looking at the explanation of this site using a translation site, but I am having trouble understanding it... How can I find the exact Switch IP address? First of all I don't know how to connect to the hack tool because my knowledge about hacks is not very good. sys-botbase is used for what and how?
Post automatically merged:

I was told that it is not a good idea to connect to Nintendo's servers with CFW, so I was using 90DNS to connect to the internet, but is this not a good way to get an accurate IP address?
Post automatically merged:

I get [Timed out. There was nothing at the specified IP address...]...
Post automatically merged:

I'm so sorry... it seems I was sleepy and kept getting the IP address wrong... it worked! Thank you!
 
Last edited by PANMOCHI,

SweetJP

Member
Newcomer
Joined
Oct 21, 2022
Messages
6
Trophies
0
Age
20
XP
16
Country
United States
Hello. Suddenly, I am Japanese. I was looking at the explanation of this site using a translation site, but I am having trouble understanding it... How can I find the exact Switch IP address? First of all I don't know how to connect to the hack tool because my knowledge about hacks is not very good. sys-botbase is used for what and how?
Post automatically merged:

I was told that it is not a good idea to connect to Nintendo's servers with CFW, so I was using 90DNS to connect to the internet, but is this not a good way to get an accurate IP address?
Post automatically merged:

I get [Timed out. There was nothing at the specified IP address...]...
Post automatically merged:

I'm so sorry... it seems I was sleepy and kept getting the IP address wrong... it worked! Thank you!
I'm having a similar problem except I enter the correct IP address, but it's the same "Nothing at the Specified IP" error
 

Taishiro

Well-Known Member
OP
Member
Joined
Apr 22, 2020
Messages
322
Trophies
0
Age
23
XP
854
Country
Chile
Hey everyone. There is game patch (v1.2.0) coming tomorrow. The program will stop working after that update, because the addresses need to be updated (I will work on that, dw.)
I do not know if Nintendo will begin detecting this type of editing from the new update, so I'd advice everyone to get what you want/need (be it ability chunks, tableturf level, etc.) before maintenance drops. 👀

I personally no longer use this tool for anything because I already got what I wanted, which was specific gear, but I will continue to update the addresses while I can. Just remember there could be a new risk after the update.

---
And for people still not being able to connect to the program: I would start blaming y'all's routers if you tried everything and are completely sure you're on CFW, sys-botbase is running and successfully opened a socket, and that your Switch and PC are both on the same internet connection and band (note that they have different private IP addresses, but they're still connected to the same WiFi, for example)
If you use mobile hotspot, that doesn't always work due to different limitations.
 
Last edited by Taishiro,

Taishiro

Well-Known Member
OP
Member
Joined
Apr 22, 2020
Messages
322
Trophies
0
Age
23
XP
854
Country
Chile
Is it currently not possible to change the number of tickets or turban shells to purchase weapons...?
If you know the address, sure. But I wouldn't do it. People have been banned for turban shells (super sea snails) and weapon tickets pose a risk too.
 

FantasyM

Member
Newcomer
Joined
Jun 17, 2020
Messages
14
Trophies
0
Age
27
XP
120
Country
Italy
@Taishiro just fyi, I tried to re-download the v1.3 and was detected as trojan.
It might just be a false positive, but could you check just in case?

Nvm, if an update of S3 is ocming out and you're going to update it at least this last time, it doesn't matter
 
Last edited by FantasyM,

WeaselClown

Member
Newcomer
Joined
Oct 25, 2022
Messages
11
Trophies
0
Age
26
XP
39
Country
New Zealand
sorry for the silly question but my switch is hacked and all and have followed all the instructions n' such but I have my DNS blocking nintendo's servers when running atmosphere so I can see my money go up and such using shiverbot but I can't exactly buy a capsule or use my chunks without being connected to nintendo's servers. when I boot up my switch normally after doing the edits my money and chunks are the same before editing. how do you do it exactly? :0 or can you go on the game through atmosphere?
 

Taishiro

Well-Known Member
OP
Member
Joined
Apr 22, 2020
Messages
322
Trophies
0
Age
23
XP
854
Country
Chile
sorry for the silly question but my switch is hacked and all and have followed all the instructions n' such but I have my DNS blocking nintendo's servers when running atmosphere so I can see my money go up and such using shiverbot but I can't exactly buy a capsule or use my chunks without being connected to nintendo's servers. when I boot up my switch normally after doing the edits my money and chunks are the same before editing. how do you do it exactly? :0 or can you go on the game through atmosphere?
Disable 90DNS and go online.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • A @ ATEMVEGETA:
    @BigOnYa, Man, first of all thanks for your willing to help, much appreciated. But, it's not that I "don't want to listen", rather than I need soemone to EXPLAIN to me how and why all these are risky.
  • K3Nv2 @ K3Nv2:
    Putting your dick in certain areas is always a risk
    +1
  • A @ ATEMVEGETA:
    For example, HOW is is risky to get banned if you extract the save files to the CFW?
  • A @ ATEMVEGETA:
    isn't this proccess be done while you're offline?
  • BigOnYa @ BigOnYa:
    We are not Nintendo, so we don't know exactly how/why/when they ban, but better to stay on the safe side and not do shady stuff, if you don't want to be banned. Hayato is one of the most knowledgeable ones here on the subject and I believe what he says.
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    300 bucks hmmm lol
  • A @ ATEMVEGETA:
    @BigOnYa, Yes ofc we don't know how Nintendo bans work, but if there are situations where a lot of people have tried safely then we can at least assume that this path is pretty much safe. To say don't try anything homebrew relative just to be safe forever is the easiest thing to say to someone. What I am trying to figure out here is with which cases and what actions got most of the people their bans for.
  • A @ ATEMVEGETA:
    Most things I can find resulting to a ban is save-editing reasons, like Pokehex, etc, and going online afterwards.
  • K3Nv2 @ K3Nv2:
    I'm almost certain fucking Google fibers modems blocking out PPPoE signals
  • K3Nv2 @ K3Nv2:
    Like the 6th time I had to reboot this router trying to get PPPoE active
  • BigOnYa @ BigOnYa:
    Ken, your hamster inside it is hungry. Can't you turn POE on/off in your WiFi settings page? Or is it not staying on?
    +1
  • A @ ATEMVEGETA:
    @BigOnYa, Well, in that thread they say it's pretty much safe to manage save files back and forth to consoles as long as you don't go online with cheats activated or with a pirate game.
  • A @ ATEMVEGETA:
    I own every of my games legit with their own cartridges
  • A @ ATEMVEGETA:
    also, I'm not planning to use any cheats, etc, just continue the normal gameplay on the emulator
  • K3Nv2 @ K3Nv2:
    It only gives a internet settings option then it spazes out
    +1
  • BigOnYa @ BigOnYa:
    @ATEMVEGETA if you use save from other switch you may be ok, but using a save from emulator to switch will prob get you banned
  • K3Nv2 @ K3Nv2:
    Under ipv4/6
  • A @ ATEMVEGETA:
    The save file will be created and started normally on the Switch's OFW with a legit game. Then that save file will be transfered to the emulator and continue the gameplay there. Then send it back to the console.
  • K3Nv2 @ K3Nv2:
    I feel like I need to touch @Sicklyboy rack to make it work at this point
  • A @ ATEMVEGETA:
    The save file(s) would never be created first in an emulator
  • A @ ATEMVEGETA:
    Do you think continuing the story on the emulator would flag the save file as illegal? (Again no cheats, etc will take place, only normal story of the game progress)
  • BigOnYa @ BigOnYa:
    But still using the save on a emulator, then back to switch is shady
    +1
    BigOnYa @ BigOnYa: But still using the save on a emulator, then back to switch is shady +1