Homebrew RELEASE RetroArch SNES Core ported to 5.0.2

[GalaxyYT]

THIS WAS NOT PORTED BY ME. IT WAS PORTED BY MX4W ON R/SWITCHAXING. original link

"I don't provide any support.

Only tested on 5.0.2. Latest libtransistor.

Don't get scared when the audio spikes right after loading a game. Only tested Super Mario World 2: Yoshi's Island
(I tested Super Mario World, it runs at full speed with no glitches as far as I can see.)

Stuff might work... or not.

Download (MEGA)
Download (Google Drive Mirror)
just in case you hate mega like me

Seems playable so far!"

Place ROMS anywhere on SD card, since RetroArch can browse through it.
5.0.2 is confirmed to be working, and I'm guessing all of 5.x works as well.

Bugs:
Saving doesn't work. Quick fix: Before you exit your game, make a save state. Load the state the next time you play. After around 20-30 seconds, your state will load and you'll be right where you left off. (Only tested on Super Mario World.)
Doesn't work on any 4.x firmware. (I'm guessing it's all of 4.x.)

 

[CatmanFan]

Does this work on 4.1.0?
The latest LibTransistor doesn't support this firmware, am I right?

 

[GalaxyYT]

Does this work on 4.1.0?
The latest LibTransistor doesn't support this firmware, am I right?

Try and test it. I'm on 5.0.2, so I can't really know. I'm assuming it will since it works on 5.x, but my assumptions are always wrong

 

[hyndrid]

Don't work on 4.1.0

 

[GalaxyYT]

Don't work on 4.1.0

Well, rip.

 

[Leonidas87]

Try and test it. I'm on 5.0.2, so I can't really know. I'm assuming it will since it works on 5.x, but my assumptions are always wrong

If it does not work on 4.1.0 which I will test in a moment then can you possibly work on making it also compatible with 4.1.0?

Would be greatly appreciated.

Also will be testing on my 5.0.2 switch and 4.1.0 switch soon.

 

[CatmanFan]

Try and test it. I'm on 5.0.2, so I can't really know. I'm assuming it will since it works on 5.x, but my assumptions are always wrong

Confirmed it doesn't work. Freezes on white Horizon screen.

 

[GalaxyYT]

If it does not work on 4.1.0 which I will test in a moment then can you possibly work on making it also compatible with 4.1.0?

Would be greatly appreciated.

Also will be testing on my 5.0.2 switch and 4.1.0 switch soon.

I'm not the one who ported it. I have very little knowledge in any of this, but if it was as easy as compiling the switch port of this emulator using libtransistor, I might look into it.

 

[Leonidas87]

4.1.0

--------------------- MERGED ---------------------------

I'm not the one who ported it. I have very little knowledge in any of this, but if it was as easy as compiling the switch port of this emulator using libtransistor, I might look into it.

My bad I remember reading that in the OP

I got someone possibly looking into 4.1.0 compatability BUT it depends.

Did not check but if the original link in OP is source that would help.

If not do you have a source link?

 

[GalaxyYT]

4.1.0

View attachment 125077

--------------------- MERGED ---------------------------



My bad I remember reading that in the OP

I got someone possibly looking into 4.1.0 compatability BUT it depends.

Did not check but if the original link in OP is source that would help.

If not do you have a source link?

Here's the source to Snes9x2010, which is what the core is. (https://github.com/libretro/snes9x2010)
It looks like you might need to do a bit to get this to work with something like LibNX that supports 4.x.

 

[Leonidas87]

Here's the source to Snes9x2010, which is what the core is. (https://github.com/libretro/snes9x2010)
It looks like you might need to do a bit to get this to work with something like LibNX that supports 4.x.

Ok sounds great see what can be done.

Fingers crossed.

--------------------- MERGED ---------------------------

@jakibaki able to lend a hand bringing 4.1.0 support to this project.

Would be greatly appreciated with the work you do.

 

[GalaxyYT]

Ok sounds great see what can be done.

Fingers crossed.

--------------------- MERGED ---------------------------

@jakibaki able to lend a hand bringing 4.1.0 support to this project.

Would be greatly appreciated with the work you do.

I would really like to see someone expand on this as well. (jakibaki is good at implementing save features like he did on his ports)

 

[Biuz]

THIS WAS NOT PORTED BY ME. IT WAS PORTED BY MX4W ON R/SWITCHAXING. original link

"I don't provide any support.

Only tested on 5.0.2. Latest libtransistor.

Don't get scared when the audio spikes right after loading a game. Only tested Super Mario World 2: Yoshi's Island
(I tested Super Mario World, it runs at full speed with no glitches as far as I can see.)

Stuff might work... or not.

Download (MEGA)
Download (Google Drive Mirror)
just in case you hate mega like me

Seems playable so far!"

Place ROMS anywhere on SD card, since RetroArch can browse through it.
5.0.2 is confirmed to be working, and I'm guessing all of 5.x works as well.

Bugs:
Saving doesn't work. Quick fix: Before you exit your game, make a save state. Load the state the next time you play. After around 20-30 seconds, your state will load and you'll be right where you left off. (Only tested on Super Mario World.)
Doesn't work on any 4.x firmware. (I'm guessing it's all of 4.x.)

Nice work, but why would you hate Mega?

 

[Leonidas87]

Am I missing a setting to enabl fullscreen or stretching??

 

[GalaxyYT]

Nice work, but why would you hate Mega?

I just don't like how they limit your downloads after ~4GB. Had to use a VPN to download the original from Reddit because I was using MEGA earlier.

 

[Leonidas87]

I just don't like how they limit your downloads after ~4GB. Had to use a VPN to download the original from Reddit because I was using MEGA earlier.

Posted a pic, do you know what setting stretches the screen.

I've been trying with no luck

 

[Connorsdad]

For those of us that can't test this right now which cores are working please?

 

[GalaxyYT]

For those of us that can't test this right now which cores are working please?

This is only the SNES core.

 

[Deletedmember448668]

THIS WAS NOT PORTED BY ME. IT WAS PORTED BY MX4W ON R/SWITCHAXING. original link

"I don't provide any support.

Only tested on 5.0.2. Latest libtransistor.

Don't get scared when the audio spikes right after loading a game. Only tested Super Mario World 2: Yoshi's Island
(I tested Super Mario World, it runs at full speed with no glitches as far as I can see.)

Stuff might work... or not.

Download (MEGA)
Download (Google Drive Mirror)
just in case you hate mega like me

Seems playable so far!"

Place ROMS anywhere on SD card, since RetroArch can browse through it.
5.0.2 is confirmed to be working, and I'm guessing all of 5.x works as well.

Bugs:
Saving doesn't work. Quick fix: Before you exit your game, make a save state. Load the state the next time you play. After around 20-30 seconds, your state will load and you'll be right where you left off. (Only tested on Super Mario World.)
Doesn't work on any 4.x firmware. (I'm guessing it's all of 4.x.)

FUCKKKKKKKKKKKK YESS!!!!!!!!!! FINALLY <3

Edit: just realized OP isnt the author of this port. Is m4xw on gbatemp? Would be nice to get some dev updates etc.

 

[Leonidas87]

This is only the SNES core.

Do you know what setting for stretching the screen please and thank you?