Hacking [Realease] ReiNand Cfw

[NaviLoz101]

ReiNAND v1.2 on N3DS. When trying to load it, it freezes at: Decrypting FIRM...

9.0E N3DS with 9.5 EMunand

Possibly a bug since the firm is already decrypted

 

[Reisyukaku]

I took today to completely rewrite the CFW from scratch (the N3DS one) for future release reasons, also to make it cleaner since this was a prototype built off cakes. Booted fine on the second try lol.. ill try to release that asap.

 

[JJTapia19]

I took today to completely rewrite the CFW from scratch (the N3DS one) for future release reasons, also to make it cleaner since this was a prototype built off cakes. Booted fine on the second try lol.. ill try to release that asap.

I can't wait to try the screenshot feature!!

 

[NaviLoz101]

Don't you need to use fbi installer on homebrew to install devmenu? or does devmenu have its own thing for homebrew?

I used my gw to install devmenu with devmenu but since I'm assuming you don't have one just install the Devmenu to Sysnand granted you Nands aren't unlinked ^^

 

[hunter010709]

It is impossible to use MSET exploits without downgrading System Settings as System Settings had DS Profile exploits patched out since 7.0. Sorry to break it to you.

The statement was
Suggested features:
-- 5.x and 6.x mset without downgrading mset (using the initial exploit from mset and the later exploits from the browser exploit)

Your response about patched in 7.0 is irrelevant to the statement, "sorry to break it to you", from your own words.

 

[Xanek]

I used my gw to install devmenu with devmenu but since I'm assuming you don't have one just install the Devmenu to Sysnand granted you Nands aren't unlinked ^^

Okay, well if I install devmenu on sysnand, format emunand, will I be able to install cia's in the emunand or only sysnand?

 

[NaviLoz101]

Okay, well if I install devmenu on sysnand, format emunand, will I be able to install cia's in the emunand or only sysnand?

Install devmenu_2x to Sysnand Open Emunand Install the devmenu_6x with devmenu_2x since devmenu_2x will show up in emunand and you can remove the devmenu_2x from sysnand and done Devmenu_6x on Emunand :3

 

[Xanek]

Install devmenu_2x to Sysnand Open Emunand Install the devmenu_6x with devmenu_2x since devmenu_2x will show up in emunand and you can remove the devmenu_2x from sysnand and done Devmenu_6x on Emunand :3

Okay.. so two more questions

how do you update the emunand, default way or some other way?

And how do you get to firmlaunch /I'm new

 

[NaviLoz101]

Okay.. so two more questions

how do you update the emunand, default way or some other way?

And how do you get to firmlaunch /I'm new

Firm lauch just mean the emunand support 9.x
And well after you've formatted an Emunand with the gw launcher / if you already have one then Launch Reinand - if you have a cartridge with 9.5 or lower update then update (it will update WmuNand) BE SURE TO CLICK WITH JNSIDE EMUNAND
BE SURE YOU HAVE AN EMUNAND ON YOU SD" can't stress that enough
You can't update Emunand form System Settings on n3ds dice 9.8 emunand for n3ds isn't supported yet but if ur on old 3ds then update via settings in emunand

 

[Xanek]

Firm lauch just mean the emunand support 9.x
And well after you've formatted an Emunand with the gw launcher / if you already have one then Launch Reinand - if you have a cartridge with 9.5 or lower update then update (it will update WmuNand) BE SURE TO CLICK WITH JNSIDE EMUNAND
BE SURE YOU HAVE AN EMUNAND ON YOU SD" can't stress that enough
You can't update Emunand form System Settings on n3ds dice 9.8 emunand for n3ds isn't supported yet but if ur on old 3ds then update via settings in emunand

So you lost me (again), can I only update with a cartridge, or can I use 3DNUS and install it with cia files?
What did you mean JNSIDE EMUNAND? I don't understand that.
and for the emunand on SD, you mean to be sure I actually have a formatted emunand and can access it with reinand correct?

 

[Lord M]

I took today to completely rewrite the CFW from scratch (the N3DS one) for future release reasons, also to make it cleaner since this was a prototype built off cakes. Booted fine on the second try lol.. ill try to release that asap.

Ehi Rey so if i not understand bad this CFW allow emunand (for example, mine is 9.4) and the possibility to use the NTR plugins cheats?

 

[usernametaken]

So you lost me (again), can I only update with a cartridge, or can I use 3DNUS and install it with cia files?
What did you mean JNSIDE EMUNAND? I don't understand that.
and for the emunand on SD, you mean to be sure I actually have a formatted emunand and can access it with reinand correct?

You can use 3dnus and update via cia if that's what you prefer.
You want to be 100% sure you're in emunand, otherwise if you update your sysnand, you'll be screwed as far as using cfw / flashcarts.
You want to be 100% sure that you have an emunand installed. Emunand created with gateway menu will function with reinand.

First thing you should do is unlink your Sysnand from Emunand once you've created one.
You can do this by after creating an Emunand, shutting off the 3ds & removing the SD card. Once the card is removed, turn the 3ds back on and format the Sysnand.
Once you've formatted Sysnand, turn off and insert SD card again. Your Sys and Emu will now be unlinked.

From that point i'd suggest changing your theme from the default to anything else, you can also create folders on the sysnand if you like.
When you boot into emunand, since it's now unlinked, it won't have the same theme or folders you just created on sysnand. That'll be your way to know for sure you're in reinand.

 

[Xanek]

Okay i'll go to doing that, but currently I have a problem

So I originally had a emunand and decided to start over because I couldn't install any cia files with the fbi installer.

So I installed fbi, bigbluemenu, savedatafiler and the multipatcher.
I was told that installing them from pastacfw would put it on the sysnand and when I formatted the emunand again that it should be on the emunand... but when I formatted it and went to ReiNand, there is nothing installed...

 

[usernametaken]

I haven't looked into fbi too much yet. I think it replaces the Health and Safety app in Sysnand though(?)
If that's the case, have you tried launching the health and safety app in your emunand?

 

[Xanek]

I haven't looked into fbi too much yet. I think it replaces the Health and Safety app in Sysnand though(?)
If that's the case, have you tried launching the health and safety app in your emunand?

Well I downloaded the homebrew version of fbi and installed the actual cia version of it from the homebrew, but in the emunand there is NOTHING from the cia installed there, did I need to actually install cia first w/ pasta on sysnand, format emunand then launch emunand? I was told by someone that it would be there on emunand when I launched it..

 

[usernametaken]

Well I downloaded the homebrew version of fbi and installed the actual cia version of it from the homebrew, but in the emunand there is NOTHING from the cia installed there, did I need to actually install cia first w/ pasta on sysnand, format emunand then launch emunand? I was told by someone that it would be there on emunand when I launched it..

Yup, pretty sure that's the route you have to take.
If your Sys & Emu were linked, maybe not? I don't know for sure though.

 

[Xanek]

Yup, pretty sure that's the route you have to take.
If your Sys & Emu were linked, maybe not? I don't know for sure though.

So... what steps do I take then?

Should I fully power off the 3DS, turn it back on to go to sysnand, launch pastacfw from homebrew, go back into homebrew launcher, install the cia's again, power off then on, then launch gateway from cubic ninja then format emuNAND?

Because this is what I did and nothing is showing up =/

 

[usernametaken]

So... what steps do I take then?

Should I fully power off the 3DS, turn it back on to go to sysnand, launch pastacfw from homebrew, go back into homebrew launcher, install the cia's again, power off then on, then launch gateway from cubic ninja then format emuNAND?

Because this is what I did and nothing is showing up =/

Is it installing the cia to Sysnand? If so and you're then creating a new emunand but not getting the transfer, then idk. You'll have to wait for someone with actual experience with this. I own a gateway card, so never had to jump through these specific hoops :|

Did you follow the second video in the guide?
https://gbatemp.net/threads/pasta-c...d-on-old-and-new-3ds-required-ninjhax.388925/

 

[Xanek]

Is it installing the cia to Sysnand? If so and you're then creating a new emunand but not getting the transfer, then idk. You'll have to wait for someone with actual experience with this. I own a gateway card, so never had to jump through these specific hoops :|

Did you follow the second video in the guide?

I did what I typed.

Then how in the world do I get the transfer then? I was told to install the cia from pastacfw, which apparently puts it on sysnand, and then creating a emunand would transfer those cia to emunand since it apparently makes a copy of the sysnand.

I don't think it matters what way, since in the end it should end up on emunand.

I did everything in the video, installed the cia in pasta, went back into pasta, its there.

Do I not go into gateway launcher from a cold boot from the 3ds? do I need to go in from pasta?

 

[usernametaken]

I did what I typed.

Then how in the world do I get the transfer then? I was told to install the cia from pastacfw, which apparently puts it on sysnand, and then creating a emunand would transfer those cia to emunand since it apparently makes a copy of the sysnand.

I don't think it matters what way, since in the end it should end up on emunand.

I did everything in the video, installed the cia in pasta, went back into pasta, its there.

Do I not go into gateway launcher from a cold boot from the 3ds? do I need to go in from pasta?

Yeah, if it's installing to your Sysnand just fine, but it's not on the Emunand directly after or even when you create a new emunand, then idk.

Hopefully someone else will chime in to help you out.