How can I tell which RCMLoader model I have?
Anyone with pics for reference to know the difference?
Anyone with pics for reference to know the difference?
I believe you can tell by the packaging it comes with. I have a transparent box and it's not the "plus" but the "one B"How can I tell which RCMLoader model I have?
Anyone with pics for reference to know the difference?
I believe you can tell by the packaging it comes with. I have a transparent box and it's not the "plus" but the "one B"
in the exterior the "B" units comes on a plastic translucent box, the "plus" version comes on a white cardboard box.
you can only to know the version with the print inside the board:View attachment 295363
This is the mine Plus actually bricked one ;( .
so the bug doesn't affect the clear box model then ?
I have the exact same issue, update goes to 20% and hangs there with the £ signs showingFor me the history is:
brought a RCMLoader One Plus V2 (White cardboard box), at first it worked fine, I was able to inject hekate_ctcaer_5.6.5.bin as payload. Then I did try to add others payloads and get a strange error, because pressing the "+" button only could change the payload to Green one, pressing again only show green light, try to format the drive as FAT and extract the file downloaded from: on to the fresh formatted drive, then ejected the drive but pressing the + button give me nothing, no light no flashing, nothing!.
I did press the reset button but no luck, connecting the unit to the computer but no USB Mass Storage drive is detected, only a HID device.
after almost 1 hour the updater is stuck on:
View attachment 295358
The "Downloading !£" keeps scrolling but no progress is made.
After disconnecting the unit from Computer, blue and green light keeps flashing.
Anybody knows how can I unbrick the unit? thanks a lot for your help
try to contact the support at the email on they support page, but get no delivery. and I can not use QQ so no contact has been possible.
Does anybody have a full updater wich reformat the USM drive, I think that cause the brick.
If you two @impeeza and @fatattack and anyone else enocounter this issue, here's what I did to fix it:I have the exact same issue, update goes to 20% and hangs there with the £ signs showing
did you ever get this fixed ?
for me was Windows 11, I did create a Windows 10 virtual machine and connect the RCM Loader to It and the upgrade process end well.If you two @impeeza and @fatattack and anyone else enocounter this issue, here's what I did to fix it:
I was stuck at 10% for over an hour, and in the website manual on step 4 it says "Click and tick “auto download”." I ended up skipping that step, leaving that box unticked, and when it said "Connected" in green text over the "Download" button, I clicked "Download" and it finished in less than 8 seconds and the green text now said "Pass".