PS5 EDM10 Green Screen & Shutdown after game launch APU, SSD Controller or Southbridge?

dandylionking

Member
OP
Newcomer
Joined
Nov 12, 2023
Messages
14
Trophies
0
Age
30
XP
87
Country
United Kingdom
Hi everyone, im new to the forum and a little stumped with this repair, ive got a PS5 EDM10 Disc version and while it appears normal (e.g booting, stays on without issue and installs apps and games fine) as soon as i try to launch anything it green screens, lets out a little whine and then powers off, i've already checked through all the voltages and everything is present and nothing is showing any shorts so basically all of my routes trouble shooting wise are a little dim, if anyone could shed some light on this i would be very grateful.

For reference
  • Theres no artifacting so i didnt suspect the APU (Unless its going into a different powerstate when launching the game and theres a core issue causing it to crash)
  • The console is installing games and apps so im assuming the SSD controller is working unless its writing alright but not reading properly
  • The console isnt recording errors when it crashes so i assume this means the South bridge is doing its job
Thanks everyone
 

dandylionking

Member
OP
Newcomer
Joined
Nov 12, 2023
Messages
14
Trophies
0
Age
30
XP
87
Country
United Kingdom
They are replaceable , but has to be all 8x same brand(micron/samsung). They are 8x around APU.
Ah right anyway of rooting out the offending chip its easy enough with Matts for Nvida or Tserver for AMD but this one is a bit of a pig in a poke. Thanks
 

jkyoho

Well-Known Member
Member
Joined
Sep 2, 2020
Messages
1,278
Trophies
0
Age
39
Location
TORONTO
Website
form.jotform.com
XP
2,209
Country
Canada
Ah right anyway of rooting out the offending chip its easy enough with Matts for Nvida or Tserver for AMD but this one is a bit of a pig in a poke. Thanks
Nothing fancy like those, all wish to have but nothing.
Isolating suspicious by swapping out chip from least to most difficult is the only way so far.
 
  • Like
Reactions: dandylionking

dandylionking

Member
OP
Newcomer
Joined
Nov 12, 2023
Messages
14
Trophies
0
Age
30
XP
87
Country
United Kingdom
Nothing fancy like those, all wish to have but nothing.
Isolating suspicious by swapping out chip from least to most difficult is the only way so farAh
Looks like its gonna be trial and error i'll nab a few Chips from kasynparts and get to work, might get it under a Thermal scope too just incase theres anything obvious happening. Thanks so much for your help
 

Phunt

Well-Known Member
Newcomer
Joined
Feb 2, 2007
Messages
59
Trophies
1
XP
169
Country
Looks like its gonna be trial and error i'll nab a few Chips from kasynparts and get to work, might get it under a Thermal scope too just incase theres anything obvious happening. Thanks so much for your help
Hi, did you manage to solve this problem ? I have 2 edm 010's with exactly the same issues as yours and from what I am reading it seems like a common fault and would love to be able to solve it. I have run both through UART and they have similar codes
One gives 808B00FF Unknown (power) and 808300F0 secure charger error
The other gives 808B00FF Unknown (power) B0088108 Unknown (chip/data) and 808300F0
I have plenty of donor boards to try swapping stuff out but not sure where to start. I had a 2 sec blod last week that turned out to be 1 of the 8 gddr rams and uart told me exactly which ic was the problem so I'm thinking this green screen problem is not main ram.
 

dandylionking

Member
OP
Newcomer
Joined
Nov 12, 2023
Messages
14
Trophies
0
Age
30
XP
87
Country
United Kingdom
Hi, did you manage to solve this problem ? I have 2 edm 010's with exactly the same issues as yours and from what I am reading it seems like a common fault and would love to be able to solve it. I have run both through UART and they have similar codes
One gives 808B00FF Unknown (power) and 808300F0 secure charger error
The other gives 808B00FF Unknown (power) B0088108 Unknown (chip/data) and 808300F0
I have plenty of donor boards to try swapping stuff out but not sure where to start. I had a 2 sec blod last week that turned out to be 1 of the 8 gddr rams and uart told me exactly which ic was the problem so I'm thinking this green screen problem is not main ram.
Hi i've rooted some of the issues to Ram IC's and i went to the extreme of replacing them all and that cleared the issue but as for your "Unknown Power" issues i have a EDM10 reporting the same via TTL so my suspicion is a Ram supply issue though all the 5v lines are intact so possibly something else a foot.
 

Notedop

New Member
Newbie
Joined
Mar 14, 2024
Messages
1
Trophies
0
Age
38
XP
6
Country
Netherlands
Hi, did you manage to solve this problem ? I have 2 edm 010's with exactly the same issues as yours and from what I am reading it seems like a common fault and would love to be able to solve it. I have run both through UART and they have similar codes
One gives 808B00FF Unknown (power) and 808300F0 secure charger error
The other gives 808B00FF Unknown (power) B0088108 Unknown (chip/data) and 808300F0
I have plenty of donor boards to try swapping stuff out but not sure where to start. I had a 2 sec blod last week that turned out to be 1 of the 8 gddr rams and uart told me exactly which ic was the problem so I'm thinking this green screen problem is not main ram.
I've got one with exactly same problem as the second one you mentioned, the one that has the B0088108 error, also green screen when starting a game. Were you able to fix it by replacing the ram?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • K3Nv2 @ K3Nv2:
    It must be the 1st already
  • BakerMan @ BakerMan:
    1st of what?
  • BakerMan @ BakerMan:
    may?
  • K3Nv2 @ K3Nv2:
    Oh yeah it's in September
  • Xdqwerty @ Xdqwerty:
    @BakerMan, yea i think its different
  • BakerMan @ BakerMan:
    ok, because here it's in september, right before the fuckin school year starts
  • Xdqwerty @ Xdqwerty:
    good night
  • BakerMan @ BakerMan:
    as to you
  • K3Nv2 @ K3Nv2:
    How do you know if the night will be good when you're asleep
  • BakerMan @ BakerMan:
    because i didn't say i was asleep
  • BakerMan @ BakerMan:
    i said i was sleeping...
  • BakerMan @ BakerMan:
    sleeping with uremum
  • K3Nv2 @ K3Nv2:
    Even my mum slept on that uremum
  • TwoSpikedHands @ TwoSpikedHands:
    yall im torn... ive been hacking away at tales of phantasia GBA (the USA version) and have so many documents of reverse engineering i've done
  • TwoSpikedHands @ TwoSpikedHands:
    I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
    TwoSpikedHands @ TwoSpikedHands: I appreciate the insight!