Toggle sidebar

Hacking Post your WiiU cheat codes here!

  • Thread starter Thread starter LawnMeower
  • Start date Start date
  • Views Views 2,116,475
  • Replies Replies 9,274
  • Likes Likes 52
.44 Magnum said:
@skoolzout1 Is the above quoted post by @ItchyOwned what you need to make your BotW button activator codes work with the pro controller?

Edit: It was originally posted on March 6th, so it's probably for the original version of the game.
Click to expand...
well i dont know about the original version of the game, but from 1.1.0 to 1.1.1 the button activator for the Gamepad stayed the same. and i havent updated to 1.1.2 quite yet.

but most likely that address will work. which codes exactly do you plan on using? from the ones that use activators?
Mr.??? said:
Hi,
May someone please help me fix this problem I'm having with the v3.85 BOTW Trainer? Every time I load up the save and connect the trainer to the wii u it hits me with a code dump error. Is it because I haven't updated the game yet? I have the latest jgecko and TCP Gecko files installed already so that shouldn't be the problem.

Thanks,
Click to expand...
you could be using the wrong IP for you wii. also make sure youre using wifi and not an ethernet cable. and make sure you install TCPgecko with CosmoCortney's codehandler, and as long as you're on 1.1.1 it should work fine
 
  • Like
Reactions: .44 Magnum
I get this when trying to load on 1.1.2 (just found out today how trainers o wii xD)

Connection closed. en BotwTrainer.TcpConn.Read(Byte[] buffer, UInt32 nobytes, UInt32& bytesRead)
en BotwTrainer.Gecko.ReadDataBufferSize()
en BotwTrainer.Gecko..ctor(TcpConn tcpConn, MainWindow mainWindow)
en BotwTrainer.MainWindow.ConnectClick(Object sender, RoutedEventArgs e)
 
skoolzout1 said:
well i dont know about the original version of the game, but from 1.1.0 to 1.1.1 the button activator for the Gamepad stayed the same. and i havent updated to 1.1.2 quite yet.

but most likely that address will work. which codes exactly do you plan on using? from the ones that use activators?
Click to expand...

@ItchyOwned just confirmed that it's still working on v1.1.2, so it looks like it'll work across all versions thus far. Thanks for the conformation Itchy.

Don't hate me, but I looked back through the code list and I'd like to use them all. Out of the 2 moon jump codes I'll probably only use v1 though.

I think this is all of them besides moon jump v2:

Statis lasts until D-Pad Down
Teleport
Teleport to map pins
Teleport to last placed placed pin
Moon jump v1
Fast forward/rewind time
D-Pad Down to spawn lightning
Free fly/no clip

I hope I'm not imposing, but I would really appreciate it.
 
Last edited by .44 Magnum,
  • Like
Reactions: ItchyOwned
.44 Magnum said:
@ItchyOwned just confirmed that it's still working on v1.1.2, so it looks like it'll work across all versions thus far. Thanks for the conformation Itchy.

Don't hate me, but I looked back through the code list and I'd like to use them all. Out of the 2 moon jump codes I'll probably only use v1 though.

I think this is all of them besides moon jump v2:

Statis lasts until D-Pad Down
Teleport
Teleport to map pins
Teleport to last placed placed pin
Moon jump v1
Fast forward/rewind time
D-Pad Down to spawn lightning
Free fly/no clip

I hope I'm not imposing, but I would really appreciate it.
Click to expand...

Okay give these a shot, i probably made mistakes but hopefully not. Also i cant do the freefly/Noclip unless i know the Values for the Left analogue sticks UpRight,UpLeft,DownRight, and DownLeft @ItchyOwned


but try these for now, also these are for 1.1.2:

Let me know if there are any issues.

Stasis lasts until Dpad Down
03010000 112671AA
00004000 00000000
00020000 4383EAC0
00000000 00000000
D0000000 DEADCAFE
04010000 112671AA
00004000 00000000
00020000 4383EAC0
40200000 00000000
D0000000 DEADCAFE

Teleport (ZL+Dpadleft = save) (ZL+DpadRight = load)
03010000 112671AA
00000082 00000000
30000000 439C0794
10000000 50000000
31000000 00000140
12100000 00000000
15040000 3DCCCCCD
13000000 4C000100
12100001 00000004
13000001 4C000104
12100002 00000008
13000002 4C000108
D0000000 DEADCAFE
03010000 112671AA
00008080 00000000
30000000 439C0794
10000000 50000000
31000000 00000140
12000000 4C000100
13100000 00000000
12000001 4C000104
13100001 00000004
12000002 4C000108
13100002 00000008
D0000000 DEADCAFE

Moonjump
03010000 112671AA
00000008 00000000
00020000 439C0528
BF800000 00000000
D0000000 DEADCAFE
04010000 112671AA
00000008 00000000
00020000 439C0528
3F800000 00000000
D0000000 DEADCAFE

Fast Forward/Rewind time (ZL + Dpadleft = -1hr, ZL+dpadRight = +1hr)
30000000 407B3AF4
10000000 50000000
31000000 000000A8
03010000 112671AA
00000081 00000000
12100000 00000000
15040000 40F00000
13100000 00000004
D0000000 DEADCAFE
03010000 112671AA
00008080 00000000
12100000 00000000
15050000 40F00000
13100000 00000004
D0000000 DEADCAFE


Press Dpad Down to Spawn Lightning
03010000 112671AA
00004000 00000000
00020000 407B602C
00000002 00000000
D0000000 DEADCAFE

B to run fast
03010000 112671AA
00000040 00000000
00020000 439C0514
40C00000 00000000
D0000000 DEADCAFE
04010000 112671AA
00000040 00000000
00020000 439C0514
3F800000 00000000
D0000000 DEADCAFE


Teleport to Pins
03010000 112671AA
00000204 00000000
C0000009 60000000
7CE73A78 3D004C00
61080200 38E00040
3C604012 6063C1D8
3C80C7C3 60845000
7C633A14 80C30000
7C062000 40A2FFF4
90680000 60000000
3C40010F 60426AE0
7C4903A6 4E800420
D0000000 DEADCAFE
30000000 4C000200
10000000 50000000
31000000 00000000
D0000000 DEADCAFE
00020000 4C000050
00000000 00000000
03010000 112671AA
00002080 00000000
12100000 00000000
12100001 00000004
12100002 00000008
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
00002081 00000000
12100000 00000040
12100001 00000044
12100002 00000048
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
00002082 00000000
12100000 00000080
12100001 00000084
12100002 00000088
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
0000A080 00000000
12100000 000000C0
12100001 000000C4
12100002 000000C8
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
00006080 00000000
12100000 00000100
12100001 00000104
12100002 00000108
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03020000 4C000050
00000001 00000000
D1000000 DEADC0DE
03010000 112671A8
00000001 00000000
30000000 439C0794
10000000 50000000
31000000 00000140
13100000 00000000
13100001 00000004
13100002 00000008
D0000000 DEADCAFE
D0000000 DEADCAFE
*Press ZR+R once code is turned on. dont forget this.
pins are placed in order of placement, not colour.
Pin Select:
Pin1 = ZL+L
pin2 = ZL+L+DpadUP
pin3 = ZL+L+DpadLeft
Pin4 = ZL+L+DpadRight
Pin5 = ZL+L+DpadDown
Once holding your pin selection, press R3 to warp to it
Press ZR+R only whenever you need to reset the pin table, it makes the next pin to be placed after pressing ZR+R be pin1 and ignoring all previous pins.

Warp to last Pin Placed
C000000B 60000000
7CE73A78 7D294A78
3D004C00 61080200
38E00040 3C604012
6063C1D8 3C80C7C3
60845000 7C633A14
7D290A14 80C30000
2C090064 41820014
7C062000 40A2FFE8
7C671850 90680000
3C40010F 60426AE0
7C4903A6 4E800420
30000000 4C000200
10000000 50000000
31000000 00000000
D0000000 DEADCAFE
03010000 112671AA
00002080 00000000
12100000 00000000
12100001 00000004
12100002 00000008
30000000 439C0794
10000000 50000000
31000000 00000140
13100000 00000000
13100001 00000004
13100002 00000008
D0000000 DEADCAFE
ZL+L to warp

--------------------- MERGED ---------------------------

Alsoo ive posted all of my codes in one place as well as updated all necessary codes to 1.1.2.

Only a few codes needed to be changed and they can be found at the end of the post.
I also added 1 or two codes here to do with Visual mods if anyone wants. (I call it Nightmare mode/ TRON mode)

https://pastebin.com/GhVJX4ZY

@CosmoCortney

only a few addresses between 40700000 - 40800000 seemed to have changed. and the ones that did change all moved by exactly 12 bytes, (+0xC)

i had other small codes in this range that seemed to remain the same.. sooo it seems almost like they just fixed a typo or something maybe XD
 
Last edited by skoolzout1,
  • Like
Reactions: Deleted member 388912, 0100100001001001, .44 Magnum and 1 other person
skoolzout1 said:
Okay give these a shot, i probably made mistakes but hopefully not. Also i cant do the freefly/Noclip unless i know the Values for the Left analogue sticks UpRight,UpLeft,DownRight, and DownLeft @ItchyOwned


but try these for now, also these are for 1.1.2:

Let me know if there are any issues.

Stasis lasts until Dpad Down
03010000 112671AA
00004000 00000000
00020000 4383EAC0
00000000 00000000
D0000000 DEADCAFE
04010000 112671AA
00004000 00000000
00020000 4383EAC0
40200000 00000000
D0000000 DEADCAFE

Teleport (ZL+Dpadleft = save) (ZL+DpadRight = load)
03010000 112671AA
00000082 00000000
30000000 439C0794
10000000 50000000
31000000 00000140
12100000 00000000
15040000 3DCCCCCD
13000000 4C000100
12100001 00000004
13000001 4C000104
12100002 00000008
13000002 4C000108
D0000000 DEADCAFE
03010000 112671AA
00008080 00000000
30000000 439C0794
10000000 50000000
31000000 00000140
12000000 4C000100
13100000 00000000
12000001 4C000104
13100001 00000004
12000002 4C000108
13100002 00000008
D0000000 DEADCAFE

Moonjump
03010000 112671AA
00000008 00000000
00020000 439C0528
BF800000 00000000
D0000000 DEADCAFE
04010000 112671AA
00000008 00000000
00020000 439C0528
3F800000 00000000
D0000000 DEADCAFE

Fast Forward/Rewind time (ZL + Dpadleft = -1hr, ZL+dpadRight = +1hr)
30000000 407B3AF4
10000000 50000000
31000000 000000A8
03010000 112671AA
00000081 00000000
12100000 00000000
15040000 40F00000
13100000 00000004
D0000000 DEADCAFE
03010000 112671AA
00008080 00000000
12100000 00000000
15050000 40F00000
13100000 00000004
D0000000 DEADCAFE


Press Dpad Down to Spawn Lightning
03010000 112671AA
00004000 00000000
00020000 407B602C
00000002 00000000
D0000000 DEADCAFE

B to run fast
03010000 112671AA
00000040 00000000
00020000 439C0514
40C00000 00000000
D0000000 DEADCAFE
04010000 112671AA
00000040 00000000
00020000 439C0514
3F800000 00000000
D0000000 DEADCAFE


Teleport to Pins
03010000 112671AA
00000204 00000000
C0000009 60000000
7CE73A78 3D004C00
61080200 38E00040
3C604012 6063C1D8
3C80C7C3 60845000
7C633A14 80C30000
7C062000 40A2FFF4
90680000 60000000
3C40010F 60426AE0
7C4903A6 4E800420
D0000000 DEADCAFE
30000000 4C000200
10000000 50000000
31000000 00000000
D0000000 DEADCAFE
00020000 4C000050
00000000 00000000
03010000 112671AA
00002080 00000000
12100000 00000000
12100001 00000004
12100002 00000008
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
00002081 00000000
12100000 00000040
12100001 00000044
12100002 00000048
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
00002082 00000000
12100000 00000080
12100001 00000084
12100002 00000088
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
0000A080 00000000
12100000 000000C0
12100001 000000C4
12100002 000000C8
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03010000 112671AA
00006080 00000000
12100000 00000100
12100001 00000104
12100002 00000108
00020000 4C000050
00000001 00000000
D0000000 DEADCAFE
03020000 4C000050
00000001 00000000
D1000000 DEADC0DE
03010000 112671A8
00000001 00000000
30000000 439C0794
10000000 50000000
31000000 00000140
13100000 00000000
13100001 00000004
13100002 00000008
D0000000 DEADCAFE
D0000000 DEADCAFE
*Press ZR+R once code is turned on. dont forget this.
pins are placed in order of placement, not colour.
Pin Select:
Pin1 = ZL+L
pin2 = ZL+L+DpadUP
pin3 = ZL+L+DpadLeft
Pin4 = ZL+L+DpadRight
Pin5 = ZL+L+DpadDown
Once holding your pin selection, press R3 to warp to it
Press ZR+R only whenever you need to reset the pin table, it makes the next pin to be placed after pressing ZR+R be pin1 and ignoring all previous pins.

Warp to last Pin Placed
C000000B 60000000
7CE73A78 7D294A78
3D004C00 61080200
38E00040 3C604012
6063C1D8 3C80C7C3
60845000 7C633A14
7D290A14 80C30000
2C090064 41820014
7C062000 40A2FFE8
7C671850 90680000
3C40010F 60426AE0
7C4903A6 4E800420
30000000 4C000200
10000000 50000000
31000000 00000000
D0000000 DEADCAFE
03010000 112671AA
00002080 00000000
12100000 00000000
12100001 00000004
12100002 00000008
30000000 439C0794
10000000 50000000
31000000 00000140
13100000 00000000
13100001 00000004
13100002 00000008
D0000000 DEADCAFE
ZL+L to warp
Click to expand...

Nice work, you are a total BOSS!! Thank you!!

Did you update to 1.1.2 yet? If not I wonder if @ItchyOwned would be willing to test these as I'd rather wait to update until you get your other codes updated to the new version as well.

On a side note, I got my Wii U today and I was wondering how to go about staying on BotW 1.1.1 until you can get your codes updated. Should I just use the TitleDNS methose you provided to block updates and then just install 1.1.1 using WUP installer?

Again, thank you so much!!

Edit: Crap, I didn't see that you had already updated your codes until after I posted this, sorry about that.

Edit 2: @skoolzout1 awesome work on the paste bin! Having all your codes in one easy to access repository will really come in handy.:yay:
 
Last edited by .44 Magnum,
  • Like
Reactions: skoolzout1
Here's a silly code i thought id just make for the lolz. This should work for both 1.1.1 and 1.1.2

Current Weapon Size Mod
00020000 4C000400
XXXXXXXX 00000000
30000000 45188784
10000000 50000000
31000000 00000040
30100000 00000000
10000000 50000000
31000000 00000990
12000000 4C000400
13100000 00000000
13100000 00000004
13100000 00000008
D0000000 DEADCAFE
*Replace X's in Line2 with Desired size amount
3F800000 = Normal Size
40000000 = 2x as big
40400000 = 3x as big
40800000 = 4x as big
41000000 = 8x as big

Current Bow Size Mod
00020000 4C000404
XXXXXXXX 00000000
30000000 4518883C
10000000 50000000
31000000 00000040
30100000 00000000
10000000 50000000
31000000 00000990
12000000 4C000400
13100000 00000000
13100000 00000004
13100000 00000008
D0000000 DEADCAFE
*Replace X's Just like with weapon size mod

Current Shield Size Mod
00020000 4C000408
XXXXXXXX 00000000
30000000 451887E0
10000000 50000000
31000000 00000040
30100000 00000000
10000000 50000000
31000000 00000990
12000000 4C000400
13100000 00000000
13100000 00000004
13100000 00000008
D0000000 DEADCAFE
*Replace X's Just like with weapon size

Normal Size Weapon
30000000 45188784
10000000 50000000
31000000 00000040
30100000 00000000
10000000 50000000
31000000 00000990
00120000 3F800000
00120004 3F800000
00120008 3F800000
D0000000 DEADCAFE

Normal Size Bows
30000000 4518883C
10000000 50000000
31000000 00000040
30100000 00000000
10000000 50000000
31000000 00000990
00120000 3F800000
00120004 3F800000
00120008 3F800000
D0000000 DEADCAFE

Normal Size Shields
30000000 451887E0
10000000 50000000
31000000 00000040
30100000 00000000
10000000 50000000
31000000 00000990
00120000 3F800000
00120004 3F800000
00120008 3F800000
D0000000 DEADCAFE
 
  • Like
Reactions: .44 Magnum and LawnMeower
Hi there,

I would like to know if it is possible to "reset" the counter of photos in Zelda BOTW, sending a code.
Let me explain my small problem.

I made a few photos of weapons, animals... by myself in the game. After a while, I noticed that we could buy photos of all items to Hateno apprentice.
As the apprentice's photos are more beautiful than mine, I would like to replace mine, but for the moment I didn't find any way to do that.

I did the following:
1. Dump of my save with saviine.
2. I removed "pict_book" directory, containing all photos made by myself.
3. Inject of the modified save.
4. When I came back to the game, the photographed items were still present and instead of the photos, there was a blank photo.
5. At this stage, if I buy all photos to the apprentice, it is adding the beautiful photos either to items that I already had, but also to items that I never had. But at the end, a lot of photos are missing and the apprentice is saying that my enciclopedia is full and that I can't buy any other photo !

That's why I would like to know if according to you, there could be a code which reset properly all photos of the encyclopedia in Zelda BOTW and make the counter of photos equal to 0 :)

I don't know if I am clear, but if someone could answer that would be nice :)
 
  • Like
Reactions: ShadowOne333
0100100001001001 said:
@skoolzout1

These codes that make weapons / bows / shields bigger wouldn't happen to increase their " damage " box too would they? That would be awesome!
Click to expand...

Its weird.. for some weapons it feels like the hitbox of the weapon is bigger, but for others it isnt. but in theory i dont believe it should make the hitboxes bigger.
 
skoolzout1 said:
Its weird.. for some weapons it feels like the hitbox of the weapon is bigger, but for others it isnt. but in theory i dont believe it should make the hitboxes bigger.
Click to expand...

I dunno if anyone asked, but those codes for 1.1.1 and/or their pointers... do they work for V1.1.2? I'd rather not update until I know that.
 
Wargla said:
Hi there,

I would like to know if it is possible to "reset" the counter of photos in Zelda BOTW, sending a code.
Let me explain my small problem.

I made a few photos of weapons, animals... by myself in the game. After a while, I noticed that we could buy photos of all items to Hateno apprentice.
As the apprentice's photos are more beautiful than mine, I would like to replace mine, but for the moment I didn't find any way to do that.

I did the following:
1. Dump of my save with saviine.
2. I removed "pict_book" directory, containing all photos made by myself.
3. Inject of the modified save.
4. When I came back to the game, the photographed items were still present and instead of the photos, there was a blank photo.
5. At this stage, if I buy all photos to the apprentice, it is adding the beautiful photos either to items that I already had, but also to items that I never had. But at the end, a lot of photos are missing and the apprentice is saying that my enciclopedia is full and that I can't buy any other photo !

That's why I would like to know if according to you, there could be a code which reset properly all photos of the encyclopedia in Zelda BOTW and make the counter of photos equal to 0 :)

I don't know if I am clear, but if someone could answer that would be nice :)
Click to expand...
I am also interested in this.
If someone knows how to do so, or gas a save dump with ALL the images bought from the guy at the Hateno Lab, please be sure to post it
 
So, I've recently installed the 1.1.2 patch, and in terms of frame rate for places like Kakariko Village... that's pretty much unchanged. I've come to expect that, really. Anyone else notice any difference?
 
@ItchyOwned it is work ^^ nice work
how can we change stats of weapon xD ??
Can you do a code for infite dragon ammo ?

I have found this code but idk what he does xD

04020000 2E6B1130
00000000 00000000
30000000 2E6B1130
25000000 33000000
31000000 00001354
00120000 004F0001
D0000000 DEADCAFE.
 
Last edited by NasodWarrior,
@skoolzout1 I haven't been able to test out the codes you converted to work with the pro controller yet. I did receive my Wii U yesterday though and I'm hoping to have it set up and ready to go by tonight or tomorrow night at the latest. Once I do I'll test out the codes and report back. Thank you again, it's very much appreciated!
 
  • Like
Reactions: skoolzout1
skoolzout1 said:
Okay give these a shot, i probably made mistakes but hopefully not. Also i cant do the freefly/Noclip unless i know the Values for the Left analogue sticks UpRight,UpLeft,DownRight, and DownLeft
Click to expand...
i dont know how work a Execute asm code... sorry =/ but, can u post the pro controller code (for no clip/fly)?
NasodWarrior said:
it is work ^^ nice work
how can we change stats of weapon xD ??
Can you do a code for infite dragon ammo ?

I have found this code but idk what he does xD

04020000 2E6B1130
00000000 00000000
30000000 2E6B1130
25000000 33000000
31000000 00001354
00120000 004F0001
D0000000 DEADCAFE.
Click to expand...
i can change only the talisman/amulette and improve the equipments to maximum (255x) :D
the awesome weapons is in the game but its only a trash (invisible weapons xD)
i have allready a complete inventory code ;)
where do u get this code?
 
ItchyOwned said:
i dont know how work a Execute asm code... sorry =/ but, can u post the pro controller code (for no clip/fly)?

i can change only the talisman/amulette and improve the equipments to maximum (255x) :D
the awesome weapons is in the game but its only a trash (invisible weapons xD)
i have allready a complete inventory code ;)
where do u get this code?
Click to expand...

Yes I will update the freefly code but I need to know what the value is when the pro controller is being pressed in the diagonal directions
 
  • Like
Reactions: .44 Magnum

Site & Scene News

Go to forum More news

Popular threads in this forum

Strange Blue Blinking Wii U

Hacking Homebrew Project  Modernized YouTube for Wii U

Wii Games Performance on Wii U (vWii C2W Overclock) – Community Testing & Results Sharing

[discussion] Paper Mario Wii U or Mario Kart 64 wii u?

[discussion] what game do you wanna see next?

Gaming Homebrew Misc Project  Roséverse - a 1:1 Miiverse revival by Project Rosé!

Can the Wii u pro controller works for Wii games ?

[PRERELEASE] Sonic 3 A.I.R. (finally) Wii U