Hacking Nintendont

[grossaffe]

anybody here know if getting an Wii 2 HDMI is worth it?

If you want better quality video, then either run Dolphin on a nice PC at a higher internal resolution, or get an XRGB-mini.

 

[Rob Blou]

does anybody have a PS3 controller and had the L and R analog buttons to work properly in Mario sunshine?? It's driving me crazy since the PS3 default ini file is not working and I tried so many things and nothing works

 

[Bug_Checker_]

If you want better quality video, then either run Dolphin on a nice PC at a higher internal resolution, or get an XRGB-mini.

fwiw,
Does XRGB Mini add input lag ?

Yes, somewhere around 20ms of input lag is added.
Source:
http://junkerhq.net/xrgb/index.php/XRGB-mini_FRAMEMEISTER

 

[VinsCool]

does anybody have a PS3 controller and had the L and R analog buttons to work properly in Mario sunshine?? It's driving me crazy since the PS3 default ini file is not working and I tried so many things and nothing works

Pressure sentitive works. Analog works on all games. It is something weird actually. Apart of not being able to run while using the fludd, it works as it should.

 

[RiCK420]

I have Nintendont setup to load from Wiiflow... Still trying to figure out how to get it to load direct to the game,
But I have another question... Maybe a bit off topic here, but still related to Nintendont....
Does anyone know how to tell the Wiiflow not to load the second disc of games? Like to only load "game.iso" or not load "disc2.iso".
Because I rather not see a game twice as disc1 and disc2, I really only need to see the disc 1 to load and play the games.

Thanks.

PS: I've also noticed Nintendont is not saving my settings since I started loading it from Wiiflow.

 

[Rob Blou]

Pressure sentitive works. Analog works on all games. It is something weird actually. Apart of not being able to run while using the fludd, it works as it should.

thx fellow Quebecois but what you are describing is the problem ... the thing is, in HID test when you press a little bit on, lets say L, offset 3 will become 01 even if the button is not fully pressed and I think that GC controllers are not like that (not sure but it's the most logical explanation I have). The analog is clearly working in HID test but if offset 3 being at 01 means that L is fully pressed, that's our problem right there. I tried doing this:
[Dual Shock]
VID=054C
PID=0268
Polltype=0
DPAD=0
Power=2,01
A=3,80
B=3,40
X=3,20
Y=3,10
Z=3,08
L=12,FF
R=13,FF
S=2,08
Left=2,80
Down=2,40
Right=2,20
Up=2,10
StickX=6
StickY=7
CStickX=8
CStickY=9
LAnalog=12
RAnalog=13

but it's not working either

 

[VinsCool]

thx fellow Quebecois but what you are describing is the problem ... the thing is, in HID test when you press a little bit on, lets say L, offset 3 will become 01 even if the button is not fully pressed and I think that GC controllers are not like that (not sure but it's the most logical explanation I have). The analog is clearly working in HID test but if offset 3 being at 01 means that L is fully pressed, that's our problem right there. I tried doing this:
[Dual Shock]
VID=054C
PID=0268
Polltype=0
DPAD=0
Power=2,01
A=3,80
B=3,40
X=3,20
Y=3,10
Z=3,08
L=12,FF
R=13,FF
S=2,08
Left=2,80
Down=2,40
Right=2,20
Up=2,10
StickX=6
StickY=7
CStickX=8
CStickY=9
LAnalog=12
RAnalog=13

but it's not working either

Is something different on analog sensitivity on other games? or it break the L/R?

 

[Rob Blou]

Is something different on analog sensitivity on other games? or it break the L/R?

I will test another game right away ... I think Zelda ww has a system of crouching when L is not fully pressed or something ... I'll test it and reply.

 

[VinsCool]

I will test another game right away ... I think Zelda ww has a system of crouching when L is not fully pressed or something ... I'll test it and reply.

Luigi's Mansion Does too use sensitive press.

 

[Rob Blou]

Ok so I tested Luigi's mansion and everything is working but I also tried Mario sunshine with this setup:
[Dual Shock]
VID=054C
PID=0268
Polltype=0
DPAD=0
Power=2,01
A=3,80
B=3,40
X=3,20
Y=3,10
Z=3,08
L=3,01
R=3,04
S=2,08
Left=2,80
Down=2,40
Right=2,20
Up=2,10
StickX=6
StickY=7
CStickX=8
CStickY=9
LAnalog=12
RAnalog=13

(3,04 being L1 button on the DS3)
so now I can run and use the FLUDD with R2 and stop to aim with L1 ... however no water is coming out when I press L1 only, I need to press both L1 and R2 so here are my thoughts:
the R= value si usually when the R button on the GC comtroller is fully pressed (the little clic) and it's independent from the RAnalog=
that would explain why R= control the stop and aim and RAnalog control the flow of water.
I think that Luigi's mansion doesn't care about the R= value and only uses the RAnalog and that would explain why it's working normally.

 

[VinsCool]

Ok so I tested Luigi's mansion and everything is working but I also tried Mario sunshine with this setup:
[Dual Shock]
VID=054C
PID=0268
Polltype=0
DPAD=0
Power=2,01
A=3,80
B=3,40
X=3,20
Y=3,10
Z=3,08
L=3,01
R=3,04
S=2,08
Left=2,80
Down=2,40
Right=2,20
Up=2,10
StickX=6
StickY=7
CStickX=8
CStickY=9
LAnalog=12
RAnalog=13

(3,04 being L1 button on the DS3)
so now I can run and use the FLUDD with R2 and stop to aim with L1 ... however no water is coming out when I press L1 only, I need to press both L1 and R2 so here are my thoughts:
the R= value si usually when the R button on the GC comtroller is fully pressed (the little clic) and it's independent from the RAnalog=
that would explain why R= control the stop and aim and RAnalog control the flow of water.
I think that Luigi's mansion doesn't care about the R= value and only uses the RAnalog and that would explain why it's working normally.

Thanks for your investigations. I will take a look on it later.

 

[Rob Blou]

Yep I just tested Luigi's mansion without any values at L= and R= and it's working as usual witch means that It's only using LAnalog and RAnalog

 

[VinsCool]

Yep I just tested Luigi's mansion without any values at L= and R= and it's working as usual witch means that It's only using LAnalog and RAnalog

Ok, so we need to find a value on L/R which enable a full press only while it IS fully pressed.
We better discuss about it on the controller thread, it is a bit offtopic.

 

[Aozz2]

try homeland the japan only game, very bad sound when playing it, i turn off the game before it even loaded so i couldnt tell if game was playable or not, ill play it later just see works but ill be turning down the tv when playing that game

 

[sonictopfan]

Tested the new version, here's the results:

-Billy Hatcher works now but crashes on save screen, disabling memory card gets the game running

-Sonic Adventure is now even more broken, controller not detected at all and has noise, surprisingly the Alpha version runs fine even though it crashes on Dios Miois

-Donald Duck Going Quakers works now, few missing sound

-Mario Kart Arcade GP 2 still crashes after character select screen

-Megaman Anniversary Collection seems to work fine now, no noise like the earlier build

-Simpsons Hit and Run still freezes on the first screen

Other than that everything seems to work just fine, I still hope for an option to support Memory Card B or at the very least make it easier to switch memory cards for the Chao Garden!

 

[drakorex]

it's just a converter so you can plug it into the hdmi port on your tv. It still shows it in 360p/48p

Wrong. I own one. It converts the signal to 1080p, makes the image alot sharper, makes colors a bit more vivid, but (for me, anyway) it also makes the picture a bit darker, which I found to be a bad thing.

 

[CM_Skunk]

Next time you should check the googlecode page linked at the bottom of the first post. i already made a controller.ini for that controller (there's a bunch of them with the same VID and PID, but different brands), it's called Generic_Controller.ini; mine has different values though, so that would explain why yours is not working.

Either its way too early for me to research or I just cant find the link where you listed it lol.... My bad

 

[faku1810]

Either its way too early for me to research or I just cant find the link where you listed it lol.... My bad

Where can I find the sources?
https://code.google.com/p/nintendon-t/

and there you have source, then browse.. Then Trunk, controllerconfigs, and this : https://code.google.com/p/nintendon...ler_Genreic_USB_Gamepad_PID=0079_VID=0006.ini

 

[FIX94]

just finished the idea of daxtsu of having a soft reset button combination, quite a neat addition
-added new patches to emulate the wii reset button by pressing the buttons R+Z+Start on your controller
So far I found 3 different patterns for the reset button detection so there might be some more out there I've missed, if you find a game which does not reset via this button combination and you see in the log that "OSGetResetButtonState" is missing just tell me which game and I might look at it.

 

[Skeet1983]

For some reason, Nintendont doesnt save settings for me. Anyone else have this problem and or know a fix?