Hacking Nintendont

[StanDaMan809]

I need another set of help...
I got a USB, so now when I load Nintendont, and try to load my game, it freezes at loading FS. My USB Drive is connected to Port 1, because Port 0 doesn't feel like working at all.

Please Help!

And Configurable USB Loader doesn't support Port 1, just Port 0.

 

[VashTS]

Forgiveness denied.

Appeals? I actually LOL'd at this, good job Joostin

 

[faku1810]

I need another set of help...
I got a USB, so now when I load Nintendont, and try to load my game, it freezes at loading FS. My USB Drive is connected to Port 1, because Port 0 doesn't feel like working at all.

Please Help!

And Configurable USB Loader doesn't support Port 1, just Port 0.

If you're using a Wii, you need to connect the USB Drive in the bottom port; if it's a WiiU, it has to be the upper back port. If any of those aren't working in your console, then you'll have to use an SD for your games.

Edit: you COULD try using LoaderGX to detect the USB in the other port, but I'm pretty sure nintendont needs that port for the usb controller.

 

[Adeka]

I need another set of help...
I got a USB, so now when I load Nintendont, and try to load my game, it freezes at loading FS. My USB Drive is connected to Port 1, because Port 0 doesn't feel like working at all.

Please Help!

And Configurable USB Loader doesn't support Port 1, just Port 0.

I use cfg usb loader with Nintendont on Wii U and it works fine.

 

[Deleted member 342493]

I need another set of help...
I got a USB, so now when I load Nintendont, and try to load my game, it freezes at loading FS. My USB Drive is connected to Port 1, because Port 0 doesn't feel like working at all.

Please Help!

And Configurable USB Loader doesn't support Port 1, just Port 0.

Mmm... in the past I had that problem but I don't remember very well how to fix it, I remember I used to formated my Pendrive USB 32KB cluster with Normal/Slow format, and then put all Nintendont archives, finally Scandisk, I hope it help you.

 

[JnL_SSBM]

Nintendont commit "file caching" will be released on next version?

 

[soylentpuss]

Enlighten me .. What are the steps of getting this working on SD? I've tried 2 different SD cards to no avail.

 

[Adeka]

Enlighten me .. What are the steps of getting this working on SD? I've tried 2 different SD cards to no avail.

Well you didn't really tell us what problem your having

 

[soylentpuss]

Well you didn't really tell us what problem your having

Apologies. vWii reboots immediately after "Loading SD init..."

 

[Adeka]

Apologies. vWii reboots immediately after "Loading SD init..."

Sounds like incompatible sd card. You said you tried 2 sd cards too. Are they formatted fat32?

 

[soylentpuss]

Sounds like incompatible sd card. You said you tried 2 sd cards too. Are they formatted fat32?

Yeah. 16GB SanDisk & 64GB PNY. Yes, fat32 & have tried various cluster sizes. Both incompatible, huh? Bummer.

 

[Deleted member 342493]

Apologies. vWii reboots immediately after "Loading SD init..."

Try that I say for the USB but now for the SD Card, Put Fat32, 32KB cluster (improves compatibility, for my generic 8GB pendrive works) Normal/Slow format, put the Nintendont files and finally use Scandisk.

 

[soylentpuss]

Try that I say for the USB but now for the SD Card, Put Fat32, 32KB cluster (improves compatibility, for my generic 8GB pendrive works) Normal/Slow format, put the Nintendont files and finally use Scandisk.

Hm. Will give the slow format & scandisk a try. Thank you.

 

[Deleted member 342493]

Hm. Will give the slow format & scandisk a try. Thank you.

You're welcome , this is my pendrive configuration, My USB had the "Checking FS..." freezing problem, I'd formated a lots of times and it didn't work, so I've tried Slow Format, with 32KB cluster, and finally scan disk, and it had worked!

 

[StanDaMan809]

You're welcome , this is my pendrive configuration, My USB had the "Checking FS..." freezing problem, I'd formated a lots of times and it didn't work, so I've tried Slow Format, with 32KB cluster, and finally scan disk, and it had worked!

It's not helping me. I spent 2 and a half hours slow formatting. Here's a picture: http://i.imgur.com/DMTeWp7.jpg
When I try to use USBLoaderGX, it won't save when I try to make the USB Slot that's detected 1 or Both, and when I try to launch the game when it tries to work, I hear my Wii (REGULAR WII) trying to get / eject a disc, then it goes to the Main Menu. My Slot 0 doesn't work, and I'm pretty sure I have Hermes cIOS, so switching USB slots shouldn't be a problem. I have ModMii and MMM installed on my Wii, so I can switch IOSes at any time. I also installed SHEEK + DI, so I can emulate GC games.

Also, Configurable USB Loader doesn't want to detect slot 1, atleast from what I've tried, so unless you guys can give me a guide, I'm completely burnt out.

 

[soylentpuss]

I've tried Slow Format, with 32KB cluster, and finally scan disk, and it had worked!

Tried this with both SD cards. Still failed on "loading sd init..." unfortunately. How well do external HDDs work with Nintendont? Anyone have luck with external usb HDDs over 250GB?

 

[soylentpuss]

It's not helping me. I spent 2 and a half hours slow formatting. Here's a picture: http://i.imgur.com/DMTeWp7.jpg

You get further than me. Mine fails at init sd. Sucks I bought two incompatible, high storage SDs. Luck of the draw.

 

[Deleted member 342493]

Tried this with both SD cards. Still failed on "loading sd init..." unfortunately. How well do external HDDs work with Nintendont? Anyone have luck with external usb HDDs over 250GB?

I never had tried a HDD, but with 3.0 ports and only USB power, don't try it, it will need the 2 back ports for power and the front ports aren't working in USB mode, only if it's with power suply will work.

 

[Adeka]

The thing is Nintendont isn't as picky as dios mios. Some sort of formatting should fix the sd card.

If only we knew the trick...

 

[Deleted member 342493]

It's not helping me. I spent 2 and a half hours slow formatting. Here's a picture: http://i.imgur.com/DMTeWp7.jpg
When I try to use USBLoaderGX, it won't save when I try to make the USB Slot that's detected 1 or Both, and when I try to launch the game when it tries to work, I hear my Wii (REGULAR WII) trying to get / eject a disc, then it goes to the Main Menu. My Slot 0 doesn't work, and I'm pretty sure I have Hermes cIOS, so switching USB slots shouldn't be a problem. I have ModMii and MMM installed on my Wii, so I can switch IOSes at any time. I also installed SHEEK + DI, so I can emulate GC games.

Also, Configurable USB Loader doesn't want to detect slot 1, atleast from what I've tried, so unless you guys can give me a guide, I'm completely burnt out.

I don't know really what to tell you, my USB after the format works good, it should work, try loading Nintendont from homebrew channel, it has better compatibility, if it doesn't work try erase all files from your device, redownload Nintendont but this time without nothing, only boot.dol meta.xml and icon.ong, maybe some file is corrupted, do you try to do ScakDisk with the SD/USB that are you using?