Hacking Nintendont

[Afeohtan]

That still leaves me in the unknown.

Only the people who runs this site know of it. If they have backups from that time they could tell us.

The exact date it gave me for this very unfortunate event was January 2, 2021.

 

[september796]

just like deflickering has been achieved to improved the vWii, can't wait til some dev finds out how to fix the extra input lag compared to Wii U mode.

 

[pedro702]

Only the people who runs this site know of it. If they have backups from that time they could tell us.

The exact date it gave me for this very unfortunate event was January 2, 2021.

I also dont know what happened to him, he just disappeared, if the thread title is anything to go by and it says rip then i fear for the worse.

 

[Drico]

how do i delete this

 

[purplegreendave]

Having issues with Dualsense controller. Most frustrating part is that it almost works.

Injected a game with UWUVCI. Used a fresh SD card (no leftover files from previously using Teconmoon). Allowed UWUVCI to pull nintendont files and create a config.
Downloaded controller_ps5.ini from /nintendont/controllerconfigs on Github. Renamed to controller.ini and placed in the root of my SD.

Launch the game with the WiiMote, choose not to use Gamepad, choose TV Only.
Once I get to the initial game screen (choose progressive mode) and confirm it has launched, I plug my controller in on the front USB.

I get functionality from the face buttons, sticks and d-pad. R1 Tracks to Z.
This is where it gets odd:
L2 works for the left trigger as far as I can tell.
R2 works for the right trigger, can register the difference between a half press and a full press (FLUDD). But it ALSO registers as a Left Trigger. So any time I Hit R2 on my Dualsense (doesn't matter if it's a full or half press), the game thinks I'm pressing the L AND R Trigger simultaneously.

I tried plugging it into HIDTest on Wii U HBC so I could fix the config file myself but got no output.
Plugged it into my PC and ran HIDTest-0.2.jar but the output was a constant stream of info in the terminal that was too fast to read.

Any ideas?

There's a github issue and apparently changing DigitalLR to 1 instead of 2.
https://github.com/FIX94/Nintendont/issues/1155

I'm going to try that today but I'm guessing you'll lose the half press so games like Sunshine won't be playable.

Post automatically merged: Feb 7, 2024

Ok I'm double posting but I've made a bit of progress so I though a second post would be ok.


Shoulder Buttons:
Pressing R2 does send an R Trigger command, and it can tell the difference between a full press and a half press. Issue is that for some reason it also sends an L trigger command which makes it useless.
I noticed that the inputs for L and R are both at "byte" 9 (counting starts at 0, so byte 9 is the 10th entry)
L=9,04 R=9,08

When compared to the DS4 config, they're at separate bytes.
L=8,F0 R=9,F0

So I figured that's why R2 does both - it sees the value increase by 04 and 08. Pressing L2 only increases it by 04, so that one works without interfering.

I deleted both lines just to see what would happen and tested a game. Now they didn’t interfere with each other anymore, but could ONLY register a half press. Obviously we want to be able to send a full press when needed.

I found this other page on github; most of it's gibberish to me, but he has a tool that runs from a Chromium browser:
https://nondebug.github.io/dualsense/dualsense-explorer.html

With that I could look at what the controller was outputting when a button was pressed. This could also be done with HIDTest, (downloadable from the HIDtoVPAD Network Client Github page). With HIDTest, it's very hard to read the output because the gyroscope and accelerometer are constantly sending tiny amounts of data and the corresponding bytes are changing so fast it gives you a headache to look at. With this online tool it was easier on my eyes to see what was happening.

I noticed from comparing the config.ini and the online tool that the half presses are registered at a different byte to the full presses:
LAnalog=5 RAnalog=6

I added the value of a full press at those addresses back in place of the lines I had deleted earlier.
L=5,F
F
R=6,FF

Checked with Mario Sunshine and I had proper half and full press of R2 as well as full press of L2.

In hindsight, I might have been able to figure that out by comparing with the DS4v2 ini, but I needed the tool's visual aid to get me there.

Face Buttons:
The Face buttons make sense if you're comparing to the Wii U Gamepad; A=Circle, B=X etc.
Gamecube has a wonky layout, but it's easy enough to swap those 4 around.

Old:
A=8,40 (Circle) B=8,20 (X) X=8,80 (Triangle) Y=8,10 (Square)


New:
A=8,20 (X) B=8,10 (Square) X=8,40 (Circle) Y=8,80 (Triangle)


Rumble
Rumble might be impossible, but I wanted to try.
PS2 has several entries in its config relating to Rumble: https://github.com/FIX94/Nintendont/blob/master/controllerconfigs/controller_ps2.ini
I was looking for what those entries meant, when I came across someone trying to do the same with the Stadia controller: https://github.com/FIX94/Nintendont/issues/1080

Going off of that, I went back to my browser with nondebug's tool open. I don't know what wizardry he has going on, but when you press a trigger the controller starts to vibrate. I checked the output panel and noticed that the first line went from:
02 FF F7 00 00
To
02 FF F7 FF FF

So I spat out the code:
Rumble=1 RumbleType=0 RumbleDataLen=05 RumbleDataOn=0x02,0xff,0xf7,0xff,0xff RumbleDataOff=0x02,0xff,0xf7,0x00,0x00 RumbleTransferLen=05 RumbleTransfers=1

So far it's not working, I also tried RumbleType=1, but I'll have another go later.

I've attached my progress. I can't upload an ini so I changed the extension to txt, just change it back to test.

 

[Flame]

I don't really like to bring up old news, but it seems odd that those who know what happened to @FIX94 are seemingly keeping quiet on it. Having deleted the thread and all. I have been wondering for a few years why he seemed to disappear, and now I know. Thanks to A.I.

Why has it been 'memory-holed' so to speak from this website? It wouldn't have something to do with coinciding with a certain roulette jab now would it?

I am not saying he took it as I'm not sure. But this seems a disservice to one of the best homebrew Wii developers.

I don't know what happened to hm exactly (fix94) but in general. But I can say this, people in the scene sometimes just want a different life. I remember when the Nocash emulator disappeared for a while. People thought the same thing about him.

https://problemkaputt.de/gbanew.htm

Just look between version 2.6b and 2.7. He came back around the time 3DS was released, They are more examples like this of devs just disappearing from the scene.

I mean, we would not just delete a rest in peace thread for no reason. It was most likely a troll who created that thread asking for new feature, when they saw Fix94 was not active any more.

Above reason is one off many reason devs just disappear, people just demand after demand like the dev owe them something.

Spoiler

Again, I don't know what happened to Fix94. Even if I did. I wouldn't say. But i don't know.

 

[Afeohtan]

I don't know what happened to hm exactly (fix94) but in general. But I can say this, people in the scene sometimes just want a different life. I remember when the Nocash emulator disappeared for a while. People thought the same thing about him.

https://problemkaputt.de/gbanew.htm

Just look between version 2.6b and 2.7. He came back around the time 3DS was released, They are more examples like this of devs just disappearing from the scene.

I mean, we would not just delete a rest in peace thread for no reason. It was most likely a troll who created that thread asking for new feature, when they saw Fix94 was not active any more.

Above reason is one off many reason devs just disappear, people just demand after demand like the dev owe them something.

Spoiler

Again, I don't know what happened to Fix94. Even if I did. I wouldn't say. But i don't know.

I hope you are right.

But, if he did pass, maybe the thread was deleted because a family member of his wanted it to be deleted.

 

[Flame]

I hope you are right.

But, if he did pass, maybe the thread was deleted because a family member of his wanted it to be deleted.

Is that likely?

How many of your members of your family know you are a member on gbatemp or which website you go on?

 

[Ettino]

just want a different life.

That's what some people find it hard to accept. When the passion for something is gone, it's gone. And it can be really hard to ignite that passion again. Especially for something that started out as a hobby project.

 

[purplegreendave]

Is this the most up to date Nintendont compatibility list?
https://wiki.gbatemp.net/wiki/Nintendont_Compatibility_List

Under the "Wide" column, many games are marked ✔¹ or ✔² but I don't see any footnotes to explain what the ^1 and ^2 are for?

 

[pedro702]

Is this the most up to date Nintendont compatibility list?
https://wiki.gbatemp.net/wiki/Nintendont_Compatibility_List

Under the "Wide" column, many games are marked ✔¹ or ✔² but I don't see any footnotes to explain what the ^1 and ^2 are for?

most of those widescreen reports are wrong i bet, this was a community list so take it as you always take it, i think one is native widescreen and and 2 forced widescreen.some games have widescreen already in them made by the devs.

 

[L0w]

Does anyone use the WUP-028 with original gamecube controllers with extention cables?
I wonder what would be the best option, buy an extention cable for each controller separate (4 in my case), or buy 2 usb extention cables for the WUP-028. If anyone has an idea, can you please share it?

 

[FrostyKap]

I bought a Wii U 2 weeks ago and have been researching the modding scene. I have dumped countless hours into research and I am stuck at the moment. Every time that I go to start a gamecube game, my Wii U becomes stuck on the “Set display to progressive mode?” screen. My WiiMote works perfectly fine up until this point. I have used Aroma for the WiiU and have installed USB Loader GX, Nintendont, HomeBrew Browser, d2x_cIOS_Installer, and Patched_IOS80_Installer_for_vWii. I feel like i’m so close, yet so far. I’ve tried changing the progressive mode setting to on in the Nintendont Settings to no prevail. I have tried to include all info in this post but feel free to ask if i’ve forgotten something!

 

[L0w]

I bought a Wii U 2 weeks ago and have been researching the modding scene. I have dumped countless hours into research and I am stuck at the moment. Every time that I go to start a gamecube game, my Wii U becomes stuck on the “Set display to progressive mode?” screen. My WiiMote works perfectly fine up until this point. I have used Aroma for the WiiU and have installed USB Loader GX, Nintendont, HomeBrew Browser, d2x_cIOS_Installer, and Patched_IOS80_Installer_for_vWii. I feel like i’m so close, yet so far. I’ve tried changing the progressive mode setting to on in the Nintendont Settings to no prevail. I have tried to include all info in this post but feel free to ask if i’ve forgotten something!

You can't use a wiimote without attachment in nintendont. What about thre gamepad? You can change it to gamepad in the settings of Nintendont.
Are you using the latest version of Nintendont?

 

[FrostyKap]

You can't use a wiimote without attachment in nintendont. What about thre gamepad? You can change it to gamepad in the settings of Nintendont.
Are you using the latest version of Nintendont?

Thanks for the reply! I've tried using a gamecube controller with a usb tap, Wiimote and Nunchuck, and GamePad but nothing seems to connect.

Post automatically merged: Feb 15, 2024

You can't use a wiimote without attachment in nintendont. What about thre gamepad? You can change it to gamepad in the settings of Nintendont.
Are you using the latest version of Nintendont?

Also, I am using the latest version of Nintendont

 

[grandosegood]

it sounds like you may need to store a game in the "games" folder on your SD card, then boot it once manually with nintendont for the settings to stick

 

[Gamemaster1379]

So I'm not sure what happened but I booted up my Wii U after a while of not using it. Wii U games work fine. I wanted to try some gamecube games. I booted up Smash Bros Melee as a VC inject. It worked fine. I pressed home to restart the console. It softlocked and reset. Now all GCN VC injects are a black screen. What did I break? How do I fix it?

 

[pedro702]

So I'm not sure what happened but I booted up my Wii U after a while of not using it. Wii U games work fine. I wanted to try some gamecube games. I booted up Smash Bros Melee as a VC inject. It worked fine. I pressed home to restart the console. It softlocked and reset. Now all GCN VC injects are a black screen. What did I break? How do I fix it?

could be that your settings file ninconfig.bin got corrupted or your controller.ini on the sd card, maybe delete them and get new ones.

 

[Gamemaster1379]

could be that your settings file ninconfig.bin got corrupted or your controller.ini on the sd card, maybe delete them and get new ones.

Would make sense. Where are those stored? How do I reset them? Just delete them?
Where's the right place to download the latest Nintendont for Wii U? Is there some fork everyone uses now?

 

[pedro702]

Would make sense. Where are those stored? How do I reset them? Just delete them?
Where's the right place to download the latest Nintendont for Wii U? Is there some fork everyone uses now?

they are just on the root of your sd card just delete them and then you will need to make a new one by either starting nintendont from a none autoboot channel like vwii and starting a random game on the sd card after changing the settings or just use the app on pc you used to make the settings before.

for nintendont forks i have no idea the official one the latest link is always on the OP