Hardware nand flash dump (3ds xl)

[krisztian1997]

I have the original cables for the dump solded inmy 3DS, I only need to add the DAT3 then.
The board would be this?
http://articulo.mercadolibre.com.ar...ar-microcontrolador-proyectos-electronica-_JM

yes, thats the arduino, and I finally got my arduino

 

[Kane49]

yes, thats the arduino, and I finally got my arduino

Dont buy it at that shop thought, the prices are ridiculous

 

[krisztian1997]

Dont buy it at that shop thought, the prices are ridiculous

Around $30... a bit expensive, but if there is no other options then you can get it from there. its *.com.ar, a shop from Argentine and they use Argentine Peso there, but the sign is the same like the USA $

 

[Moquedami]

Yeah, pricess are ridiculous in Argentina in general.

 

[olfa]

I have the original cables for the dump solded inmy 3DS, I only need to add the DAT3 then.
The board would be this?
http://articulo.mercadolibre.com.ar...ar-microcontrolador-proyectos-electronica-_JM

i wrote in previous post that we need dat3, and how to conenct it to raspberry pi spi pins
but maybe we don't need the extra dat3 (if we can use 1-bit mode, not sure yet) according to what i read on
http://yifan.lu/2014/01/11/dumping-the-vita-nand/

will have to test and see

 

[Moquedami]

So, I need to buy this:
http://articulo.mercadolibre.com.ar...ar-microcontrolador-proyectos-electronica-_JM
and this:
http://articulo.mercadolibre.com.ar...-tarjetas-sd-micro-sd-spi-arduino-arm-pic-_JM

How do I connect both together?

 

[krisztian1997]

its very easy to connect them together, my current arduino is very annoying, sometimes I cant connect to the serial monitor... I never had this problem with my old arduino before

 

[Inaki]

What do you guys recommend ? I also have a raspberry pi collecting dust, maybe it's more convinient than the arduinos ? do you have code ready for this ? My second 3ds xl is arriving on monday or tuesday, I will use GW to backup nands etc. and then solder, etc. But maybe this weekend I can get everything else ready and try messing around with some microsd crads...

 

[krisztian1997]

What do you guys recommend ? I also have a raspberry pi collecting dust, maybe it's more convinient than the arduinos ? do you have code ready for this ? My second 3ds xl is arriving on monday or tuesday, I will use GW to backup nands etc. and then solder, etc. But maybe this weekend I can get everything else ready and try messing around with some microsd crads...

Umm, nope, I dont have any code for raspi, I never made programs for raspi only for arduino, so I have no idea how to port the code from arduino to raspberry

 

[Inaki]

Umm, nope, I dont have any code for raspi, I never made programs for raspi only for arduino, so I have no idea how to port the code from arduino to raspberry

ok, I'll stick to arduino then.

 

[jochem77]

I have my Arduino Starter Kit and I have a bs 3DS. Like I mentioned before, I have no experience with the arduino and I have to practise soldering. If someone can tell me what to do, I will try that. I also have a micro sdhc adapter, but I don't know my card reader will work (like in other posts)

 

[olfa]

ok, I'll stick to arduino then.

i have a raspberry pi, pm me
also check older posts -> see my post about 3ds + raspberry pi spi pins match up

 

[UTerror]

olfa: do you have some code or examples for the raspi?
I soldered a breakout cable to the spi pins today. I enabled the spi module, but had to leave for work

 

[olfa]

olfa: do you have some code or examples for the raspi?
I soldered a breakout cable to the spi pins today. I enabled the spi module, but had to leave for work

i sent you a pm
starting points
http://neophob.com/2012/08/raspberry-pi-enable-the-spi-device/
http://www.100randomtasks.com/simple-spi-on-raspberry-pi
http://www.blaess.fr/christophe/2012/11/02/spi-sur-raspberry-pi-1/ (use google translate if needed)

 

[olfa]

mmc (sdcard) bitbanging (with rasp pi)
https://raw.github.com/vanvught/OpenILDA/master/OpenILDA-emmc/common/lib/mmcbb.c

 

[Daku93]

Here is what I did, as a small weekend Project:

I connected all 4 Data Lines.
This is the speed I can read the NAND at:

Problem:

Either I need to find a spot where I can put the SD Adapter under the Batery Cover or I need to get some sort of a Plug and Socket that has 7 or more Pins and fits inside...

 

[Gizmo1k]

did you capture the read speed when you just had one data line? you could always do two micro usb adapters..

Here is what I did, as a small weekend Project:

I connected all 4 Data Lines.
This is the speed I can read the NAND at:

Problem:

Either I need to find a spot where I can put the SD Adapter under the Batery Cover or I need to get some sort of a Plug and Socket that has 7 or more Pins and fits inside...

 

[Daku93]

Gizmo1k

Read speed in 1bit mode was around 6MB/s

 

[Gizmo1k]

what about a 7 pin micro jst connector

http://www.ebay.com/itm/Micro-Mini-1-5-ZH-7-Pin-JST-Connector-with-Wire-x-10-sets-/121254182795

Gizmo1k

Read speed in 1bit mode was around 6MB/s

 

[Daku93]

That could work. But I can't find anything like this on german ebay. I might get a SATA Plug and Port. That should fit inside the hole I made, too