Hacking Question My Switch won't boot into CFW

[vi7ual]

So I power off my Switch, open TegraRcmGUI and press the power button and volume button on my switch but nothing happens the switch doesn't turn on or anything.

Notes:
This has only been happening today; every other time it worked
I tried reinstalling the files required ex: Atmosphere, payload, etc.

 

[chippy]

Hold vol up then hit power. Best way to get it to work
Now does your TegraRcmGUI detect rcm?

 

[vi7ual]

Nope it doesn’t detect it literally nothing happens

--------------------- MERGED ---------------------------

Hold vol up then hit power. Best way to get it to work
Now does your TegraRcmGUI detect rcm?

Nope it doesn’t detect it literally nothing happens

 

[pcwizard7]

use the dock charger and little sit for an hour. maybe be a complete drain battery

 

[vi7ual]

use the dock charger and little sit for an hour. maybe be a complete drain battery

Didn’t work

 

[Lacius]

Do you have AutoRCM installed?

 

[vi7ual]

Do you have AutoRCM installed?

No

 

[Lacius]

Does your Switch boot OFW normally?

 

[vi7ual]

Yes

 

[Lacius]

Yes

Does the Switch charge normally when docked or connected to a wall outlet?

 

[vi7ual]

Does the Switch charge normally when docked or connected to a wall outlet?

yes

 

[Lacius]

yes

Does it charge using the cable you're trying to use to connect it to the PC? It sounds like it might be an issue with the cable or the PC USB port.

 

[vi7ual]

Does it charge using the cable you're trying to use to connect it to the PC? It sounds like it might be an issue with the cable or the PC USB port.

Yes it does charge

 

[Lacius]

Yes it does charge

If the same cord allows a charge when connected to a wall outlet but not when connected to the PC, then I suspect the problem is with the PC. Try another USB port. If that doesn't work, try another computer.

 

[vi7ual]

If the same cord allows a charge when connected to a wall outlet but not when connected to the PC, then I suspect the problem is with the PC. Try another USB port. If that doesn't work, try another computer.

Well now what’s happening is it says the rcm is detected but it says the driver is missing on tegrarcmgui and I install it but it says install failed but when my switch isn’t plugged in it says it installed correctly

 

[Lacius]

Well now what’s happening is it says the rcm is detected but it says the driver is missing on tegrarcmgui and I install it but it says install failed but when my switch isn’t plugged in it says it installed correctly

Reboot your computer and try again.

 

[vi7ual]

Reboot your computer and try again.

I did try that

 

[Lacius]

I did try that

Put the Switch into RCM, plug it into the computer, and install the proper driver with Zadig.

 

[pcwizard7]

Well now what’s happening is it says the rcm is detected but it says the driver is missing on tegrarcmgui and I install it but it says install failed but when my switch isn’t plugged in it says it installed correctly

run as admin
if fails reboot with driver signature verification disabled (settings>update and recoevery>advance startup>restart then advance options>more>startup stettings>option 7

 

[vi7ual]

run as admin
if fails reboot with driver signature verification disabled (settings>update and recoevery>advance startup>restart then advance options>more>startup stettings>option 7

i dont understand what your talking about

--------------------- MERGED ---------------------------

Put the Switch into RCM, plug it into the computer, and install the proper driver with Zadig.

didnt work

--------------------- MERGED ---------------------------