My stylus is trapped

[Terminator02]

Ok, so I have no idea where to put this, but my stylus got shoved down the slot when I dropped it and I can't get it out... (try to be mature about that)
so my stylus is this one:

Spoiler: super fuzzy picture

how the hell am I gonna get this out?

 

[Matthew]

Cut it out? no really, I have no idea

 

[dark ajax]

Wow, i hope you can get it out, I would try using a blade screwdriver or some tweezers, but of course it depends on how stuck it is...

 

[Schlupi]

Get a screwdriver, a flat head one. press against the stylus slowly while applying more pressure as you pry it up and out.

It SHOULD work. If it is even a little loose tweezers are a better idea if they can fit in there.

Hope this helps.

 

[Terminator02]

Get a screwdriver, a flat head one. press against the stylus slowly while applying more pressure as you pry it up and out.

It SHOULD work. If it is even a little loose tweezers are a better idea if they can fit in there.

Hope this helps.

i can assure you it's not loose

 

[ehayes427]

yeah get some tweezers.

 

[Schlupi]

Get a screwdriver, a flat head one. press against the stylus slowly while applying more pressure as you pry it up and out.

It SHOULD work. If it is even a little loose tweezers are a better idea if they can fit in there.

Hope this helps.

i can assure you it's not loose

Then go with the screwdriver idea. Tweezers will not fit, most likely.

 

[FlashX007]

I see you have a midnight blue too. Is the console damaged in anyway by the stylus? I suggest if it is under warranty that you get it fixed for free by Nintendo.

EDIT: NVM. It looked like midnight blue color so I thought it was a DSi XL but it is a Cobalt DS Lite. If you never did it you can register it on Club Nintendo to get a 90 day warranty.

 

[RoMee]

you can try taking the case off, it's not too hard and you should be able to access the stylus

but do this at your own risk

 

[Terminator02]

I see you have a midnight blue too. Is the console damaged in anyway by the stylus? I suggest if it is under warranty that you get it fixed for free by Nintendo.

EDIT: NVM. It looked like midnight blue color so I thought it was a DSi XL but it is a Cobalt DS Lite. If you never did it you can register it on Club Nintendo to get a 90 day warranty.

no, it works fine, but I can't use the stylus -.-

and I was trying to find a way to do it without taking the DS apart...

 

[superkidmax]

you can use a knife to stick it in the back side of the ds stylus and push it out.

 

[Schlupi]

I see you have a midnight blue too. Is the console damaged in anyway by the stylus? I suggest if it is under warranty that you get it fixed for free by Nintendo.

EDIT: NVM. It looked like midnight blue color so I thought it was a DSi XL but it is a Cobalt DS Lite. If you never did it you can register it on Club Nintendo to get a 90 day warranty.

no, it works fine, but I can't use the stylus -.-

and I was trying to find a way to do it without taking the DS apart...

RAWR Flathead screwdriver method. >=3

 

[Mesiskope]

sorry couldn't help myself.

 

[Ikki]

Shovel it out.

SUPER SPECIAL AWESOME TUTORIAL SKETCH BY ME GO

Spoiler

Being "something thin" a fork or something hard but thin

 

[HateBreed]

Use so WD-40 so some spray lubricant -.- dont laugh.. dammit i said dont laugh.. i know u didnt laugh but anyways.. use some lubricant and use a knife or a small flat head..

 

[EpicJungle]

Get some lubricant LOL
And a flathead screw driver...

 

[Schlupi]

DO NOT use any sort of oily lubricant. You'll never get it off, one, and two, It needs to be deep in the crevasse to be able to lubricate the part you need to be... well, lubricated, and it WILL NOT if there is no space between the stylus and DS's slot... Not worth it.

 

[Nintendo_Chick]

Use a small hand torch to melt it out.

 

[Officer Delibird]

Call nintendo before you try anything

 

[Bluelaserman]

Lube it up