Hardware My sky3ds blue botton is not working

[vpexxi]

I recently purchased a sky3ds no limit version9 (blue), and I am using 8.10 frameware 3DS XL, and I have roms written by DIskWriter, it has no problem on loading the first game i put in SDcard, but nothing happen when I tried to switch the games( press the blue button)? Any Idea? thanks a bunch!

 

[Don21]

you better contact sky3ds then.

 

[DavGerm4]

This has worked for me, but I don't know if it'll work for you or not; touch the settings icon, and when it loads the settings press X to close out, then try pressing the button once, and see if it switches to the next game.

 

[Deleted-355425]

just eject the cart when its all switched on then plug it back in again.

 

[codedfox]

OP, don't know if you fixed your problem but this same thing happened to my and it turned out that my Micro SD was bad. Try using a different micro SD if you have one (use something bigger than 2gb, they seem to not work)

Also, you can run this test on the micro SD to check for corruption:
http://www.softpedia.com/get/System/System-Miscellaneous/H2testw.shtml

Copy-paste the results of the test to us when you get them (although it may be obvious to you that it found corruption)

 

[codedfox]

OP, don't know if you fixed your problem but this same thing happened to my and it turned out that my Micro SD was bad. Try using a different micro SD if you have one (use something bigger than 2gb, they seem to not work)

Also, you can run this test on the micro SD to check for corruption:
http://www.softpedia.com/get/System/System-Miscellaneous/H2testw.shtml

Copy-paste the results of the test to us when you get them (although it may be obvious to you that it found corruption)

PS. don't forget to insert the sky3ds without a micro SD card and let it blink three times and then hold the button for five seconds. This "resets" it and helps with switching micro SD cards. Then you can insert the new card and everything should work fine.