Well yeah I did that but it didn't do anything.
Ran it for 15mins now and it's still like this
What might be wrong here?
Please connect with telnet and run:
Code:
wc -l /tmp/nzone.macs
ifconfig $(nvram get wl0_ifname)
nvram get cron_jobs
Well yeah I did that but it didn't do anything.
Ran it for 15mins now and it's still like this
What might be wrong here?
wc -l /tmp/nzone.macs
ifconfig $(nvram get wl0_ifname)
nvram get cron_jobs
Please connect with telnet and run:
Code:wc -l /tmp/nzone.macs ifconfig $(nvram get wl0_ifname) nvram get cron_jobs
root@Linksys E900:/tmp# wc -l /tmp/nzone.macs
root@Linksys E900:/tmp# ifconfig $(nvram get wl0_ifname)
eth1 Link encap:Ethernet HWaddr 20:AA:XX:XX:XX:XX
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:77810 errors:0 dropped:0 overruns:0 frame:83896
TX packets:154187 errors:124 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10681733 (10.1 MiB) TX bytes:206630307 (197.0 MiB)
Interrupt:3 Base address:0x1000
root@Linksys E900:/tmp# nvram get cron_jobs
What is the DD-WRT build number? Looks like you did not install DD-WRT or did not run install script at all.Here
What is the DD-WRT build number? Looks like you did not install DD-WRT or did not run install script at all.
Open WEB GUI and check cron job and startup script has changed or not.Here: DD-WRT v24-sp2 (05/27/13) big - build 21676
Just reran the install script. Still nothing.
Open WEB GUI and check cron job and startup script has changed or not.
There's a line in startup now.
Nothing in cron jobs.
Just reboot router, and once more do exactly what is written in the guide at page10 of the topic.
If it wont work (no cron jobs, no startups cript on the WEB GUI) PM me, we'll try to investugate your issue!
YOu want what?took a few tries but I managed to edit in the google spreadsheet ... (near end of page 177 in this thread, my post is the 2nd-last on that page I think. Link at end of post.)
PLEASE
Can someone copy/paste the spreadsheet link back onto the sticky on page one of this thread?
View attachment 11462 View attachment 11461
I'm having a problem and I'm at my wits end trying to figure it out. I set up my network, my 3ds connects to it im using the NZ network. It pops up to the on the 3ds that im in a nintendo hotspot. But the problem is when I use mac cycle it's changing my mac address for my "Wi-Fi" connection from my wifi dongle, but when it does it causes Microsoft Virtual.. etc (NZ@McD1) to disable itself. And then I pretty much have to manually remove the changed mac to turn it back on.
View attachment 11459View attachment 11460
is it me only
but I didn't get a single SSB streetpass
Well I've run the maccheck and it closes without giving me a result, so I screenshotted all it said before it closes. The second program BSOD my computer and I had to repair my bios because it wouldn't start. So normally I would take it as my hardware doesn't support changing macs? but what i find weird is that I can change the Mac address and it shows in the system the changed mac address and it will function in and of itself but the virtual windows program does not. So I'm still confused.Please follow "Before you tried anythging else" method in the first post. I'll be able to help.
It's working fineYou told yesterday that everythng is working. Just keep update toyr 3DS to 9.2.0 and keep the script running if so. I'm getting a full set of 12 SPs for SSB over the night
So... just to check if I'm on the right track or not: If was using win7 before the update, since it forces the WPA encryption method on hosted networks, I have no other choice but to use the NZ@McD1(at least for now)?. Otherwise, if the network isn't open, attwifi won't get any streetpasses, right?.
Most probably you have a drivers that make BSOD instead of normal MAC change. maccheck.cmd only cheks if the physical adapter driver can change mac, not taking into account the virtual hosted AP mode. Please try to download http://nintendozone.no-ip.org/maccheck3.cmd and run it from the command prompt without any parameters. PM me the result in case if sucesfully finishes. In case of BSOD your wireless adapter driver is not suitable for homepass, try to update it from the manufacturer site, if possible.Well I've run the maccheck and it closes without giving me a result, so I screenshotted all it said before it closes. The second program BSOD my computer and I had to repair my bios because it wouldn't start. So normally I would take it as my hardware doesn't support changing macs? but what i find weird is that I can change the Mac address and it shows in the system the changed mac address and it will function in and of itself but the virtual windows program does not. So I'm still confused.
It's working fine
I get tags for all the games except SSB