Hacking homebrew error 11.9

[wer123]

Hey,

today I installed the homebrew launcher for the first time on firmware version 11.9.0-42E (old 3ds) according to Jack Sorrell's guide on youtube. After that I tried installing cfw (frogminer method). I followed every step precisely and everything worked fine until I clicked on "BOOT patched DS Download Play". Now when I'm entering the steeldiver app/homebrew launcher I get the following message:


An exception occurred

Processor: ARM11 (core1)
Exception type: data abort
Fault status: Translation - page
Current process: menu (004003000009802)

R0 00000000 R1 00000000
R2 FFF8C424 R3 00000002
R4 DEADBABE R5 0010201C
R6 DEADBABE R7 00000000
R8 00101BC8 R9 00000001
R10 3438C0E8 R11 00100FB8
R12 0010201C SP 35040000
LR 0010201C PC 0010201C
CPSR 60000010 FPEXC 00000700
FAR 35040000 Access type: Read



However in the system settings, the firmware version is displayed like that: Sys 11.9.0-42E. Also, if I remove my SD card, my 3DS won't turn on. My game cartridges are still working perfectly fine though.

Does anyone know how to finish the cfw installation or to remove it to start from scratch?

I would be really glad, if someone could help me with this issue

 

[Ryccardo]

You already have CFW (Luma, to be precise - and you didn't read the part of Luma's instructions where it says *hax payloads are incompatible), why are you trying to install it from scratch again?

 

[wer123]

You are saying that I have Luma but according to the guide it wasn't installed correctly:

"4. Power on your 3DS to launch the Luma3DS configuration menu

• If your 3ds boots normally to the HOME Menu then boot9strap did not install correctly, please follow Point B from this guide."

Step B didn't help

What should I do next? Also I don't know what you mean by saying hax payloads are incompatible. Do you mean I have to wait until there is a otherapp payload for 11.9? I haven't found this text passage in the guide.

 

[Itzumi]

You are saying that I have Luma but according to the guide it wasn't installed correctly:

"4. Power on your 3DS to launch the Luma3DS configuration menu

• If your 3ds boots normally to the HOME Menu then boot9strap did not install correctly, please follow Point B from this guide."

Step B didn't help

What should I do next? Also I don't know what you mean by saying hax payloads are incompatible. Do you mean I have to wait until there is a otherapp payload for 11.9? I haven't found this text passage in the guide.

try holding select while booting.

 

[Hayato213]

Never follow youtube video, try disabling arm11 exception handler.

 

[PokeNev]

I tried the steel miner method for the homebrew menu on firmware 11.9.0U and Steel Miner Opens up then says there was a problems and tells me to reset my system then when I do I open it again and it says the same thing

--------------------- MERGED ---------------------------

--------------------- MERGED ---------------------------

Sorry, It sounds like I'm a little dumb kid who can't even spell correctly, sorry. I never read my responses before I post them.

 

[larrypretty]

Hey,

today I installed the homebrew launcher for the first time on firmware version 11.9.0-42E (old 3ds) according to Jack Sorrell's guide on youtube. After that I tried installing cfw (frogminer method). I followed every step precisely and everything worked fine until I clicked on "BOOT patched DS Download Play". Now when I'm entering the steeldiver app/homebrew launcher I get the following message:


An exception occurred

Processor: ARM11 (core1)
Exception type: data abort
Fault status: Translation - page
Current process: menu (004003000009802)

R0 00000000 R1 00000000
R2 FFF8C424 R3 00000002
R4 DEADBABE R5 0010201C
R6 DEADBABE R7 00000000
R8 00101BC8 R9 00000001
R10 3438C0E8 R11 00100FB8
R12 0010201C SP 35040000
LR 0010201C PC 0010201C
CPSR 60000010 FPEXC 00000700
FAR 35040000 Access type: Read



However in the system settings, the firmware version is displayed like that: Sys 11.9.0-42E. Also, if I remove my SD card, my 3DS won't turn on. My game cartridges are still working perfectly fine though.

Does anyone know how to finish the cfw installation or to remove it to start from scratch?

I would be really glad, if someone could help me with this issue

Jack Sorrell's guide on youtube? he use which method to homebrew the 3ds 11.9?

 

[Kwyjor]

Jack Sorrell's guide on youtube? he use which method to homebrew the 3ds 11.9?

Never follow Youtube videos! The only guide you really need is https://3ds.hacks.guide/ . Period.

 

[wormdood]

An exception occurred

Processor: ARM11 (core1)
Exception type: data abort
Fault status: Translation - page
Current process: menu (004003000009802)

R0 00000000 R1 00000000
R2 FFF8C424 R3 00000002
R4 DEADBABE R5 0010201C
R6 DEADBABE R7 00000000
R8 00101BC8 R9 00000001
R10 3438C0E8 R11 00100FB8
R12 0010201C SP 35040000
LR 0010201C PC 0010201C
CPSR 60000010 FPEXC 00000700
FAR 35040000 Access type: Read

in the system settings, the firmware version is displayed like that: Sys 11.9.0-42E.

the two above quotes are proof that you have cfw installed so hax payloads wont work if you need to access homebrew
boot ds download play once open press "L" + "down" + "select" select the option to inject hb into the current app (may be under miscellaneous) once it succeeds press "b" until you are back in the app then press then home close the app and reopen it

Also, if I remove my SD card, my 3DS won't turn on. My game cartridges are still working perfectly fine though.

Does anyone know how to finish the cfw installation or to remove it to start from scratch?

according to Jack Sorrell's guide on youtube.

give me a link . . . (just leave out the www and the .com) . . . i also need to know where you got up to in the video (minute mark)

 

[wer123]

boot ds download play once open press "L" + "down" + "select" select the option to inject hb into the current app (may be under miscellaneous) once it succeeds press "b" until you are back in the app then press then home close the app and reopen it

Thats the step from section III according to the official guide (finalizing setup), right? But I haven't put fbi.cia, ctr-no-timeoffset.3dsx etc. onto the sd card yet (section I). Should I continue with the official guide?

give me a link . . . (just leave out the and the ) . . . i also need to know where you got up to in the video (minute mark)

9:16 /watch?v=O4UDNtsYBR8&t

The guy from the video opens up his hb launcher and chooses the option "RESTORE clean DS Download Play". This step doesn't work for me

Never follow Youtube videos! The only guide you really need is 3ds.hacks.guide . Period.

Does anyone know how to finish the cfw installation or to remove it to start from scratch?

Maybe it would be better to just remove cfw with gm9 and then to try again with the official guide? It seems like I have mixed up a couple of steps.

 

[Kwyjor]

Thats the step from section III according to the official guide (finalizing setup), right? But I haven't put fbi.cia, ctr-no-timeoffset.3dsx etc. onto the sd card yet (section I). Should I continue with the official guide?

As noted, you already have CFW installed, so that would be the next step, yes. It's certainly a better idea than trying to remove cfw.

 

[wer123]

Thank you! It worked

 

[irishjoshplays]

I have the same problem, except when I do the stuff in rosalina menu and close download play and open again, it gives me a black screen

 

[Yuuki_Nanese]

Never follow youtube video, try disabling arm11 exception handler.

^
This worked for me