Hacking Help getting iEvolution to work

[DxEggman]

Recently, I've been trying to help someone get his cyclo running on his DSi, but we get stumped right at:
"9. The red LED should switch off after a few seconds, which indicates
that the iEvolution bootstrap update is in progress. If the LED does not
switch off, or if it flashes on and off, then there is a problem. This
is often simply the result of contact issues with the MicroSD card, so
try again from the beginning if you get such an error."


The red light stays on. I've tried 2 different microSD cards, and can't figure out what's wrong...
If anyone can help, please do...

 

[zhuzhuchina]

did you copy the bootstrap on the microsd ?

 

[Another World]

if you have all of the correct (and verified) files and you know what you are doing then it is possible that your dongle is bad. on launch many of the people i talked with had dongle issues.

DS Phat/Lite Instructions:
1.Copy “BOOTUPDT.EVO” to the Root directory of a freshly formatted microSD card
2.Insert the Cyclods iEVO, without any microSD cart, into a DS Phat or DS Lite.
3.Power up the DS console, the red LED light will turn on
4.Insert the microSD card into the iEvolution. The red LED with turn off indicating that the bootstrap is being flashed
5.Wait approximately 3 minutes until the red LED turns back on. The iEvolution is now ready for use

hope that is of use to you,
-another world