1. awdrifter

    awdrifter Member
    Newcomer

    Joined:
    Oct 30, 2018
    Messages:
    30
    Country:
    Antarctica
    This is is when the JR Programmer V2 is only lighting up the red LED, the Bootloader Attached and Removed is when I'm trying to plug and unplug the USB cable, the Device Not Found error message is when I tried to program the Xell image.

    Thanks.


    ===================================================
    Sunday, August 18, 2019 8:31:29 PM

    J-Runner v0.5 Started


    WARNING! - Your selected working directory already contains files!
    You can view these files by using 'Show Working Folder' Button

    Glitch2 Selected
    Jasper 16MB Manually Selected
    Bootloader Removed.

    Bootloader Attached
    Bootloader Version: 1.0.5
    Initializing nanddump1.bin..
    Jasper 16MB
    Jtag Selected
    Nand Initialization Finished
    Comparing...
    Nands are the same
    Glitch2 Selected
    Jasper 16MB Manually Selected
    ECC created
    Device Not Found.
    Device Not Found.
    Bootloader Removed.

    Bootloader Attached
    Bootloader Version: 1.0.5
    Device Not Found.
    Bootloader Removed.

    Bootloader Attached
    Bootloader Version: 1.0.5
    Device Not Found.
    Jasper 16MB Manually Selected
    ECC created
    Device Not Found.
    Bootloader Removed.

    Bootloader Attached
    Bootloader Version: 1.0.5
    Bootloader Removed.

    Bootloader Attached
    Bootloader Version: 1.0.5
    Jasper 16MB Manually Selected
    ECC created
    Device Not Found.
    Bootloader Removed.
     
  2. brickmii82

    brickmii82 GBAtemp Maniac
    Member

    Joined:
    Feb 21, 2015
    Messages:
    1,290
    Country:
    United States
  3. awdrifter

    awdrifter Member
    Newcomer

    Joined:
    Oct 30, 2018
    Messages:
    30
    Country:
    Antarctica
    Cool, I will try it this weekend.
     
  4. releasethedogs

    Newcomer

    Joined:
    Jan 11, 2009
    Messages:
    5
    Country:
    United States
    Before I go through all the trouble to hack my console I want to ask about the functionality of…
    A) achievements; do they still work?
    B) Japanese regional games; can they be played? A bootleg version is fine but I'm not against buying the foreign games if necessary.
    C) Delisted XBLA games that I missed out on such as Scott Pilgrim. Can they be added somehow?

    What's the best console version to buy that I can get all these features?

    Thank you so much.
     
  5. godreborn

    godreborn GBAtemp Guru
    Member

    Joined:
    Oct 10, 2009
    Messages:
    9,438
    Country:
    United States
    a) you can still get achievements, b) if you flash the drive, only games that are for your region work or region free. c) you can download those games elsewhere, and they should work. however, they're only playable with a jtag/rgh to run unsigned code.
     
  6. chaotix000

    chaotix000 Member
    Newcomer

    Joined:
    Dec 6, 2011
    Messages:
    22
    Country:
    United States
    I have a Falcon phat 360 that I wanna set RGH 1.2 up on. I have the Matrix Glitcher v1 coming in but I don't have a JRProgrammer. I have the x360usb pro v5 with a ck3 mini that I used to mod the disc drive but that's it. Do i need to get a different x360usb (like the v2) or can I work with what I've got?

    Short question: Can I dump the nand with the x360usb pro v5?
     
  7. DinohScene

    OP DinohScene Feed Dino to the Sharks
    Moderator

    Joined:
    Oct 11, 2011
    Messages:
    20,381
    Country:
    Antarctica
    Nope.
    You can with an LPT cable but that requires more soldering and a parallel port on your PC.
    You need a NAND-X/JRProgrammer/whatever SPi flasher there is.
     
  8. chaotix000

    chaotix000 Member
    Newcomer

    Joined:
    Dec 6, 2011
    Messages:
    22
    Country:
    United States
    Got it. Thanks. I got the JR Programmer
     
  9. DinohScene

    OP DinohScene Feed Dino to the Sharks
    Moderator

    Joined:
    Oct 11, 2011
    Messages:
    20,381
    Country:
    Antarctica
    Good luck! Make sure you check the soldered connections and never turn on the 360 when the NAND dumper is attached, it'll fry the hardware.
     
  10. chaotix000

    chaotix000 Member
    Newcomer

    Joined:
    Dec 6, 2011
    Messages:
    22
    Country:
    United States
    Do I have to desolder it completely or can I leave the wires and connector attached without the JR Programmer attached?
     
  11. DinohScene

    OP DinohScene Feed Dino to the Sharks
    Moderator

    Joined:
    Oct 11, 2011
    Messages:
    20,381
    Country:
    Antarctica
    You can leave the wires, just disconnect the flasher from the console when you boot it.
     
  12. TattooerJ

    TattooerJ Newbie
    Newcomer

    Joined:
    Oct 8, 2019
    Messages:
    1
    Country:
    United States
    I've been browsing through some of the threads and haven't seen a fix for what I have planned to use the 360 for. I would like to be able to use iso and run multiple emulators on it and the disk drive is pretty much not even needed for the plan and Live isn't a thought. What would be the best method to go about modding the 360 preferably without using soldering?
     
  13. godreborn

    godreborn GBAtemp Guru
    Member

    Joined:
    Oct 10, 2009
    Messages:
    9,438
    Country:
    United States
    I wouldn't even bother with emulators. mednafen is okay from what I remember, but nearly all of them feel incomplete. you don't need the disc drive if using an rgh, but I don't believe there's a solderless method for what you're wanting to do.
     
  14. DinohScene

    OP DinohScene Feed Dino to the Sharks
    Moderator

    Joined:
    Oct 11, 2011
    Messages:
    20,381
    Country:
    Antarctica
    There's not really a solderless method no.
    I'd say go to a modshop with it.
     
  15. idanny76

    idanny76 Member
    Newcomer

    Joined:
    Jan 20, 2020
    Messages:
    10
    Country:
    United States
    Forgive my ignorance. I had a PHAT console that I J-tagged the DVD drive a long time ago. I was given a 360 Slim a couple of days ago. It is a Trinity board with Dashboard 7349. If I am correct.... the only mod option here is RGH2 with ACE v3 chip. If I read correctly this unit cannot be J-Tagged? Can I transfer the modded DVD drive from the Phat and put it in the Slim?
     

    Attached Files:

  16. godreborn

    godreborn GBAtemp Guru
    Member

    Joined:
    Oct 10, 2009
    Messages:
    9,438
    Country:
    United States
    I think you mean 17349. slims cannot be jtagged.
     
    idanny76 likes this.
  17. idanny76

    idanny76 Member
    Newcomer

    Joined:
    Jan 20, 2020
    Messages:
    10
    Country:
    United States
    Yes that's the dashboard version 17349.
     
  18. DinohScene

    OP DinohScene Feed Dino to the Sharks
    Moderator

    Joined:
    Oct 11, 2011
    Messages:
    20,381
    Country:
    Antarctica
    I think you mean you flashed your DVD drive and no you can't swap them out like that.

    OSIG mismatch and DVD key mismatch.
     
    idanny76 likes this.
  19. idanny76

    idanny76 Member
    Newcomer

    Joined:
    Jan 20, 2020
    Messages:
    10
    Country:
    United States
    Thank you for the reply and I yes I flashed the DVD drive. I had an idea it was not possible, but I thought I ask the experts. So if I RGH2 with the Ace V3 chip..... it really doesn't matter if I stay on the Dashboard 17349 or update to the new Dashboard?
     
  20. DinohScene

    OP DinohScene Feed Dino to the Sharks
    Moderator

    Joined:
    Oct 11, 2011
    Messages:
    20,381
    Country:
    Antarctica
    You can update or stay, doesn't matter.
    But yeh, you can RGH it.
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - [Guide],