Getting wifi on desmuME

GETTING WIFI TO WORK ON DESMUME

First you will need a couple of things:

A Computer(of course)
A wired internet connection (via LAN cable)
Win PCap(PROVIDED)
A wi-fi compatible DesmuME(PROVIDED)
Any wi-fi compatible game.(DO NOT ASK FOR ANY LINKS TO ROMS OF COURSE....)




STEP 1 : Download this pack DesmuME wifi pack this contains Win Pcap and the other things you will need. Also a version 0.9.7 of desmuME with wifi capabilities enabled by slytherx HERE.Whichever version of desmume you are using ( 32 or 64 bit) in its own folder... along with any other files the emu may need in that same folder along with it.



STEP 2: Unzip contents and Install Win Pcap.After installation make sure and give Win Pcap exceptions in all firewall software..When installing Winpcap..check the option for starting the driver as windows starts up.



STEP 3: Open DesmuME(IMPORTANT NOTE....ALL WINDOWS 7/WINDOWS VISTA USERS MUST OPEN DESMUME AS AN ADMINISTRATOR OR ELSE AN ERROR WOULD OCCUR WHEN CONNECTING TO WIFI" and go to Config--->Emulation settings. Now set the correct paths for the ARM 7 BIOS, ARM 9 bios and Firmware bin...of course it would be wherever you downloaded it to...Make sure the "Use external Bios image" "Use external firmware image" ,"Boot from firmware like the nds" AND "Enabled Advanced bus level timing" are all checked...I am not sure about the rest so leave them unchecked.. It would now look like this...

http://img153.imageshack.us/i/setupg.png


STEP 4: IN desmuME still go to Conifg---> wifi and click on "Infrastructure mode"



STEP 5:Now open your game and go into Nintendo Wi-fi settings and search for an access point...u should see "SOFT AP" as one...test connection to that and it should work...I think this must be done every time you open/close the emulator....(Hey can't be too perfect)

STEP 6:Enjoy....
yaynds.gif


TRYFORCE's TUTORIAL ON GETTING WIFI TO WORK ON DesmuME ON ANDROID COMPATIBLE DEVICES

TryForce said:
Android users are in luck!!! I just tested WFC in pokemon black according to the op's tutorial except my connection to the internet is via USB tether to my Andoid phone!
I have a rooted MyTouch 3G (I'll try it on my new MyTouch 4g next week).
I'm running a hacked ver. of Cyanogen 6.1 Signed. I'm simply using Cyanogen mod's built-in USB tether.

Here's what I did:
a. Follow Lune's directions for DesmuME and winPcap setup.
b. Disconnect your current active internet connection.
c. Plug your 3g/4g data capable android device into a USB (2.0) port in your PC.
d. Set your phone to tether via USB. In Cyanogen 6.1 this can be done via Settings->Wireless & networks->Tethering. Check the box next to usb tethering.
e. Verify that you have established an internet connection. Windows 7 sees my device as a network adapter called "Remote NDIS based internet sharing device". Regardless of the device ID, you should have a valid IP and be able to browse the web.
f. Restart Windows (This is necessary to let winpcap work "its magic").
g. Don't forget to run desmume as administrator in Windows 7/Windows vista!!
h. In desmume's wifi settings (config->wi-fi), you should see your android device's manufacturer in the dropdown box. Mine simply said "HTC". Select it.
i. You should be set!

Again, this was tested on a rooted mytouch 3g running Cyanogen 6.1. Results may vary. I can probably help some people who need it. For more information about rooting your android device, check out the cyanogen mod forums (make sure you understand the risks involved).

Thanks for this tut, Lune!


Video of me on gts in Pokemon White
Went on GTS

Video of a wifi battle on Pokemon white (lost of course..):
Wfi battle

NOTE:AGAIN I HEARD THIS ONLY WORKS FOR WIRED CONNECTIONS you could try on wireless i guess...


GAMES TESTED SO FAR:

Pokemon White/Black:Works good was able to do random battle and go on gts...i think union room has Anti piracy stuff in it but didnt try it..
Mario kart DS:For some reason everything goes well but race never starts
Yugioh World Championship 2011:Over the nexus : Works very good no problems..
Tetris Ds:Works great


ERROR TROUBLESHOOTING

BEFORE ANY OF THE FOLLOWING MAKE SURE THESE THINGS ARE DONE FIRST:
-Again..have a wired connection by a cable (lan cable)
-Run desmuME as an administrator
-"For anyone getting 'Unable to get IP address' or 'Unable to connect to Nintendo Wi-fi network' errors, you need to check your router firewall settings. I use DD-WRT and an enabled SPI Firewall will not allow you access, disabling that let everything work fine.(by Forumpost)
-Disabling any firewalls that you think would be blocking the process...
-WINDOWS 7/WINDOWS VISTA users must go to network and sharing center and make sure that your connection type is set to HOME network and NOT PUBLIC OR WORK(work may work but meh)
-In the Wi-fi settings in desmume make sure it is set ton infrastructure mode and also the correct bridging is enabled with your ETHERNET CONTROLLER (your network adapter)
- Try pressing tab when connecting to nintendo wi fi connection..weird but might work

Emulator doesn't save: You would have to go into PATH SETTINGS and set your own paths for screenchots,cheats,roms,saveram etc.

Error Code 52000/52001/52002:Check your modem status and change it from bridging to PPPOE or PPPOA(sometimes work).Also double check the WEP key you entered(if used).Make sure if your on windows 7 that you have run the emulator as an administrator and also check that it's connection is an exception in your firewall/antivirus software

Error Code 52100:There could be Ip address conflict going on...you will have to give your ds its own ip address rather than using dhcp to find its own..check HERE
for help on doing that(too long to type..).Also you can try chaging the dns to 4.2.2.2 4.2.2.3 4.2.2

Error with saving wifi settings: "try keeping the external bios and firmware but without booting to ds on."

CREDITS GO TO:
DJPlace:Testing Mario kart ds
Dreamboy21: For information on the firewall exceptions and testing Tetris Ds
ryuga93:Info on error 52000
slytherx: HUGE THANKS for compiling the 0.9.7 version to use wi-fi
Forumpost: For information on disabling firewall in router settings
soc4real: For information on bridging connection with Ethernet controllers.
Tryforce:Another HUGE THANKS for tutorial on getting wi-fi to work using android devices.
Chojo: with help on error 52100
Jayc & 007 shinobi: Help on getting wifi settings to save
kay2kid: on help in "speed up connect" method
 
Lol your EXACTLY right...its what im thinking...why isn't this more popular indeed..that was the reason i bougt a ds due to wi-fi.. xD
 
Right I thought It was working until I got a a "52200" error say unable to connect to Nintendo or something. I get fullbars in the Wi-Fi Signal indicator though.
 
If you are using windows 7 did you "run as administrator" as it gives that error...usually
also ur doing this from a wired connection
 
Lune said:
If you are using windows 7 did you "run as administrator" as it gives that error...usually

Yeah that's what I'm doing and still getting errors
frown.gif
 
Did you set up the connection from the title screen or did you went and try ingame immediately?
 
everything has worked for me except clicking infrastructure. I click on wifi setting, and i am set an ad-hoc, and the infrastructure bubble to click on is unclickable. its a light gray. i tried connecting with ad-hoc, but it didnt work. any suggestions?

EDIT: i am still on ad-hoc, so that has not changed, but i did something different in terms of setup and i got the the SOFTAP connection. the problem comes up in step 2, and this is the message i get. "Install your nintendo wi-fi usb connector software and then insert the nintento wi-fi usb connector into your computers USB port. tap ok to contune"

it could be that clicking on infrastructure gets rid of this problem, because when i click ok i get the error message "unable to find the nintendo wi-fi usb connector. if problrms persist, visit support.nintendo.com
 
Yeah. does it matter that i am on my computer's internet system? i go to nyu, so the only available internet i have is their internet.
 
that does a good job of explaining, and at the end it mentions in home routers. i dont have an in home router, i have NYU's connection. maybe that could be the problem? other than that i dont see why i cant click on the infrastructure settings
 
Keep on getting error code 52000 unable to obtain IP address........I'm using windows XP
 
ryuga93 said:
Keep on getting error code 52000 unable to obtain IP address........I'm using windows XP


Makes sure firewall's are diabled or add exceptions to any firewalls/antivirus etc..
In windows 7 that error usually occurs when a program isnt run as administrator as a Popup usually comes up asking to continue a connection(which you should get) and then you can connect.But also this error can be a DHCP related problem also as you may have to fill in your own ip addres and other things... Type "cmd" in RUN to bring up command prompt.Then type "ipconfig /all" in command prompt to bring up information on your connection....Copy the first 3 digits of your IPV4 address as u see in command prompt into the DS configuration screen but change the last number to 10 higher than what you see...

Example if you see 192.168.1.123 change it to 192.168.1.133 in your ds...

Also copy all other settings like the Subnet mask, Default gateway Primary and Secondary DNS also...BUT DO NOT CHANGE THESE!!
Then try a connection..also check to make sure you set it to infrastructure mode and also your connection should be wired.
 
When I try to run any game, once I get to the title screen and press start or A it takes me to the main menu. But when I press anything it loops me back to the title screen and I cant do anything...
Anyone know why this happens?
 
Lune said:
ryuga93 said:
Keep on getting error code 52000 unable to obtain IP address........I'm using windows XP


Makes sure firewall's are diabled or add exceptions to any firewalls/antivirus etc..
In windows 7 that error usually occurs when a program isnt run as administrator as a Popup usually comes up asking to continue a connection(which you should get) and then you can connect.But also this error can be a DHCP related problem also as you may have to fill in your own ip addres and other things... Type "cmd" in RUN to bring up command prompt.Then type "ipconfig /all" in command prompt to bring up information on your connection....Copy the first 3 digits of your IPV4 address as u see in command prompt into the DS configuration screen but change the last number to 10 higher than what you see...

Example if you see 192.168.1.123 change it to 192.168.1.133 in your ds...

Also copy all other settings like the Subnet mask, Default gateway Primary and Secondary DNS also...BUT DO NOT CHANGE THESE!!
Then try a connection..also check to make sure you set it to infrastructure mode and also your connection should be wired.

Well I have found out the problem
laugh.gif
Just need to change my modem status from bridging to PPPOE mode
tongue.gif
(You may add this to you tutorial as well,cause most people from my country using bridging)
 

Site & Scene News

Popular threads in this forum