Fluffy

So what's different about Fluffy?
Fluffy is the first to introduce:

• Goldleaf and Tinfoil Support.
• USB and Network install with transfer rate and progress bar.
• Display current install rate in MB/ for both USB and Network mode(Goldleaf & Tinfoil too)
• Display current NCA name and count.
• Transfer mode option switchable between "Normal" and "Safe".
• Individual NSP selection (suggested by: ShadowHand, thanks!)
• Show current NSP being installed
• Switch connected indicator
• USB 5.x Fix (Compatible with Firmware versions 5.x and below)

GitHub:
https://github.com/fourminute/Fluffy

Latest Releases
https://github.com/fourminute/Fluffy/releases

Recommended TinFoil.nro
https://github.com/fourminute/Fluffy/blob/master/Tinfoil.nro




How-To-Use

• Download and Install Python 3 from https://www.python.org/downloads/. Ensure no previous version of Python is installed. This may cause an error "PyUSB not found". Do not use the 64-bit version of Python 3 with Fluffy.
• Open Terminal/CMD
• Run "pip3 install pyusb" and "pip3 install pyqt5" and "pip3 install libusb" and "pip3 install libusb1"
• MacOS users must also run "brew install libusb". For more info on brew, head to https://brew.sh/.

Going forward,
I plan to support Fluffy for the foreseeable future.

I hope this tool can help anyone and everyone that uses it,
fourminute

 

[fourminute]

you need to put the icon file in same folder ?

I am releasing an update (v1.3) that will change this, but yes, it needs to be in the same folder for now. Don't worry, the next version will remove that as a necessity.

 

[fourminute]

Good job but I will stick with Goldleaf (Since it is still unstable, thought) and ugly tinfoil usb install. Yours are nice but lacking of pretty GUI. It is not pretty to be honest. Again.. Good job and keep up with it. Please improve the pretty GUI.

You'll be glad to know I've redesigned the UI .

It is optional but requires two additional modules: pyqt5 and qdarkstyle.

 

[linuxares]

You'll be glad to know I've redesigned the UI .

It is optional but requires two additional modules: pyqt5 and qdarkstyle.

So fluffy!

 

[spotanjo3]

You'll be glad to know I've redesigned the UI .

It is optional but requires two additional modules: pyqt5 and qdarkstyle.

Haha.. Nicely done. A donut ? LOL!

 

[fourminute]

Haha.. Nicely done. A donut ? LOL!

I remembered Simpson's donuts and thought about how fluffy they were. That's where the idea came from.

 

[lordelan]

You'll be glad to know I've redesigned the UI .

It is optional but requires two additional modules: pyqt5 and qdarkstyle.

 

[luk_pop]

New ver. works gr8. 24MB/s

 

[spotanjo3]

I remembered Simpson's donuts and thought about how fluffy they were. That's where the idea came from.

Haha, I know about it. Ok. Good job and keep up the good work!

What about macOS version ?

 

[linuxares]

Haha, I know about it. Ok. Good job and keep up the good work!

What about macOS version ?

Doesn't it work? Since it's a Python software after all. It should be platform independent.

EDIT: In OP even

• MacOS users must also run "brew install libusb". For more info on brew, head to https://brew.sh/.

 

[spotanjo3]

Doesn't it work? Since it's a Python software after all. It should be platform independent.

I am aware of macOS should be working because of Python but.. fluffy.pyw. It is for Windows.

 

[linuxares]

I am aware of macOS should be working because of Python but.. fluffy.pyw. It is for Windows.

Rename it to .py. The pyw is just a fast way to execute it on Windows. It's nothing special.

 

[stick267]

For me, double clicking on macOS just opens it in a text editor. If you run "python3 fluffy.pyw" in Terminal it'll launch the GUI.

 

[spotanjo3]

For me, double clicking on macOS just opens it in a text editor. If you run "python3 fluffy.pyw" in Terminal it'll launch the GUI.

I dont understand.

Rename it to .py. The pyw is just a fast way to execute it on Windows. It's nothing special.

He said just rename it an d you are good to go.

 

[linuxares]

yes, you can run pyw file in Terminal in both OSX and Linux. Since then you tell Python to run the file, the .pyw file extention is just Python Windows. It calls the pythonw.exe file, since that doesn't really exist on Linux or Mac OSX. It's just to rename it to .py if you so wish. Or just run the .pyw in terminal. Same same, but different

 

[huma_dawii]

Does it work with Goldleaf ?

 

[linuxares]

Does it work with Goldleaf ?

S/he is working on getting goldleaf to work. So soon-ish?

 

[LuigiXL]

Mac OS:

Python quit unexpectedly.
terminating with uncaught exception of type NSException
Abort trap: 6

Any insight? Well done!

 

[fourminute]

Mac OS:

Python quit unexpectedly.
terminating with uncaught exception of type NSException
Abort trap: 6

Any insight? Well done!

Can you upload fluffy.log?

 

[HoTsHoTz79]

Love it... Using Tinfoil / Fluffy now until Goldleaf is more stable with USB nsp installation.
(Was unable to install NSMBDeluxe... but tinfoil/fluffy worked with no issues)

@fourminute anyway i can make the donut pic smaller to show on my side? i dont like how Fluffy takes 1/3rd of my screen because of the pic (monitor @ 1080 resolution) ... i prefer compact design like how TegraRCMGUI is

 

[OrGoN3]

So a GUI for TinFoil USB transfer. Looks awesome. But by TinFoil do you mean TinFoil-DZ or original Tinfoil-Adubbz?