YayMii said:You don't need the fix. If the Acekard shows up as Danny Phantom (which should only show in a DSi), then you shouldn't have any problems with the Acekard.
YayMii said:You don't need the fix. If the Acekard shows up as Danny Phantom (which should only show in a DSi), then you shouldn't have any problems with the Acekard.
Ericthegreat said:Oh ok maybe this will fix things, post back with results.
But of course it will work.............if you did some research is says right here what you need to do before trying an AK2i into a DSi ( or DSi XL since they are virtually the same ).
All this talking and alarming...........OMG IT DOESN'T WORK!!!!!
Have some common sense and just follow the tutorial, OK ? How much easier could it get ?
QUOTEYour acekard 2/i will not work on dsi 1.4u, e, j, or any other firmware without following step 5 in the new tutorial. Unless your acekard 2i was pre-updated by the seller to work on dsi firmware 1.4. If you didn't see anything about it being 1.4 compatible on the sellers website, then it probably isn't compatible with 1.4 firmware. So just follow step 5. Thanks.![]()
Arm73 said:Ericthegreat said:Oh ok maybe this will fix things, post back with results.
But of course it will work.............if you did some research is says right here what you need to do before trying an AK2i into a DSi ( or DSi XL since they are virtually the same ).
All this talking and alarming...........OMG IT DOESN'T WORK!!!!!
Have some common sense and just follow the tutorial, OK ? How much easier could it get ?
QUOTEYour acekard 2/i will not work on dsi 1.4u, e, j, or any other firmware without following step 5 in the new tutorial. Unless your acekard 2i was pre-updated by the seller to work on dsi firmware 1.4. If you didn't see anything about it being 1.4 compatible on the sellers website, then it probably isn't compatible with 1.4 firmware. So just follow step 5. Thanks.![]()
Lakerfanalways said:Thanks for the clarification..so since my AceKard 2i already says on the site where I bought it from says..
*Updated - Compatible with DSi Firmware 1.4
that means I dont have to do anything right..I pretty much take their word for it that they already put in the fix and its all good..I only have a DS Lite so I have never even tested my card on a DSi before so I have no clue so I just have to take their word for it
kaputnik said:Lakerfanalways said:Thanks for the clarification..so since my AceKard 2i already says on the site where I bought it from says..
*Updated - Compatible with DSi Firmware 1.4
that means I dont have to do anything right..I pretty much take their word for it that they already put in the fix and its all good..I only have a DS Lite so I have never even tested my card on a DSi before so I have no clue so I just have to take their word for it
It should workright out of the box, yes. And if it doesn't for some reason, you can use your DSL to flash your AK2i with the 1.4 fix. It's no big deal, just make sure your DSL is plugged in, run the flasher and wait a minute when it does its thing.
oni222 said:ok I got home and I used the firmware update posted on this thread and my DSi XL works. I just wanted to point out that when I bought the card it stated that it was 1.4 ready but that does not matter since it all ended well.
So everybody who was unsure wether to buy an XL or not go ahead the USA version is the same version as Japan and Europe.
Thanks for all the fast replies and all the help![]()

